kirei EchoTile Geometry Pattern Installation Guide

kirei EchoTile Geometry Pattern Installation Guide

EchoTile Geometry−Delta Installation Guide

What’s included in a box:

  • 20 Delta Tiles
  • 1 bag of 70 adhesive tabs

Tools needed (not included): 

  • Level
  • Measuring Tape
  • Pencil

Notes: Adhesive tabs may pull finish or paint off of the wall when removed. It is not recommended to use adhesive tabs on wood, brick, or other textured surfaces. Construction adhesive is recommended for installation on textured surfaces, ceilings, and high traffic areas. Adhesive tabs are not reusable. If a tile was placed incorrectly, re-apply the tile to the surface using a new set of adhesive tabs.

Tiles are cut on a grain and can reflect light differently, looking slightly lighter or darker depending on placement. When applying the tiles, ensure the color of the tiles complements your light source. Rotate the tile if color varies from the adjacent tile.

Installation

Delta Tiles require (3) 1”x1” adhesive tabs per tile for proper mounting and installation. Easy peel tabs have the same amount of adhesive on each side and will adhere to painted surfaces, dry wall, or smooth cement. Order extra adhesive tabs at www.store.kireiusa.com.

How to apply easy peel adhesive tabs:

  1. Clean the wall surface of application by wiping with a damp cloth or wet rag. Do not apply tiles to the surface until it is completely dry.
  2. Peel off one side of the adhesive tab. Place tab on tile and press firmly for 20 seconds. Repeat this step for all designated tab placements, as shown on the tile above.
  3. Use a level to align the first tile, and mark the wall.
  4. Peel off the other side of the adhesive tabs
  5. Repeat steps 1-5 for all tiles. Ensure that each tile properly aligns with previous tiles.
  6. Repeat steps 1-5 for all tiles. Ensure that each tile properly aligns with previous tiles.

EchoTile Geometry−Oblong Installation Guide

What’s included in a box:

  • 20 Oblong Tiles
  • 1 bag of 70 adhesive tabs

Tools needed (not included): 

  • Level
  • Measuring Tape
  • Pencil

Notes: Adhesive tabs may pull finish or paint off of the wall when removed. It is not recommended to use adhesive tabs on wood, brick, or other textured surfaces. Construction adhesive is recommended for installation on textured surfaces, ceilings, and high traffic areas. Adhesive tabs are not reusable. If a tile was placed incorrectly, re-apply the tile to the surface using a new set of adhesive tabs.

Tiles are cut on a grain and can reflect light differently, looking slightly lighter or darker depending on placement. When applying the tiles, ensure the color of the tiles complements your light source. Rotate the tile if color varies from the adjacent tile.

Installation

Oblong Tiles require (3) 1”x1” adhesive tabs per tile for proper mounting and installation. Easy peel tabs have the same amount of adhesive on each side and will adhere to painted surfaces, dry wall, or smooth cement. Order extra adhesive tabs at www.store.kireiusa.com

.How to apply easy peel adhesive tabs:

  1. Clean the wall surface of application by wiping with a damp cloth or wet rag. Do not apply tiles to the surface until it is completely dry
  2. Peel off one side of the adhesive tab. Place tab on tile and press firmly for 20 seconds. Repeat this step for all designated tab placements, as shown on the tile above.
  3. Use a level to align the first tile, and mark the wall.
  4. Peel off the other side of the adhesive tabs.
  5. Press the tile firmly to the wall surface for 20 seconds. It is very important that the first tile is placed correctly.

  6. Repeat steps 1-5 for all tiles. Ensure that each tile properly aligns with previous tiles.

 

EchoTile Geometry−Square Installation Guide

What’s included in a box:

  • 10 Square Tiles
  • 1 bag of 50 adhesive tabs

Tools needed (not included):

  • Level
  • Measuring Tape
  • Pencil

Notes: Adhesive tabs may pull finish or paint off of the wall when removed. It is not recommended to use adhesive tabs on wood, brick, or other textured surfaces.Construction adhesive is recommended for installation on textured surfaces, ceilings, and high traffic areas. Adhesive tabs are not reusable. If a tile was placed incorrectly, re-apply the tile to the surface using a new set of adhesive tabs.

Tiles are cut on a grain and can reflect light differently, looking slightly lighter or darker depending on placement. When applying the tiles, ensure the color of the tiles complements your light source. Rotate the tile if color varies from the adjacent tile.

InstallationSquare Tiles require (4) 1”x1” adhesive tabs per tile for proper mounting and installation. Easy peel tabs have the same amount of adhesive on each side and will adhere to painted surfaces, dry wall, or smooth cement. Order extra adhesive tabs at www.store.kireiusa.com.

How to apply easy peel adhesive tabs:

  1. Clean the wall surface of application by wiping with a damp cloth or wet rag. Do not apply tiles to the surface until it is completely dry
  2. Peel off one side of the adhesive tab. Place tab on tile and press firmly for 20 seconds. Repeat this step for all designated tab placements, as shown on the tile above.
  3. Use a level to align the first tile, and mark the wall.
  4. Peel off the other side of the adhesive tabs.
  5. Press the tile firmly to the wall surface for 20 seconds. It is very important that the first tile is placed correctly.

  6. Repeat steps 1-5 for all tiles. Ensure that each tile properly aligns with previous tiles.

EchoTile Geometry Bend Installation Guide

What’s included in a box:

  • Opt 1) 40 Oblong Speckled Gray40 Oblong Pacific
  • Opt 2) 40 Oblong Pacific40 Oblong Wine
  • Opt 3) 40 Oblong Pacific40 Oblong Navy4 bags of 70 adhesive tabs

Tools needed (not included):

  • Level
  • Measuring Tape
  • Pencil

Notes: Adhesive tabs may pull finish or paint off of the wall when removed. It is not recommended to use adhesive tabs on wood, brick, or other textured surfaces. Construction adhesive is recommended for installation on textured surfaces, ceilings, and high traffic areas. Adhesive tabs are not reusable. If a tile was placed incorrectly, re-apply the tile to the surface using  a new set of adhesive tabs.

Tiles are cut on a grain and can reflect light differently, looking slightly lighter or darker depending on placement. When applying  the tiles, ensure the color of the tiles complements your light source. Rotate the tile if color varies from the adjacent tile.

  • Option 1: Geo Cool Serenity | Speckled Gray and Pacific
  • Option 2: Geo Iron & Wine | Pacific and Wine
  • Option 3: Geo Cool Serenity | Pacific and Navy
Installation

Oblong Tiles require (3) 1”x1” adhesive tabs per tile for proper mounting and installation. Easy peel tabs have the same amount of adhesive on each side and will adhere to painted surfaces, dry wall, or smooth cement. Patterns are made to be repeatable. If more tiles are desired visit us at www.store.kireiusa.com to purchase another pattern bundle or extra adhesive tabs.

How to apply adhesive tabs and install tiles: 

  1. Clean the wall surface of application by wiping with a damp cloth or wet rag. Do not apply tiles to the surface until it is completely dry.
  2. Peel off one side of the adhesive tab. Place tab on tile and press firmly for 20 seconds. Repeat this step for all designated tab placements.
  3. Measure out and mark all pattern edges on the wall for desired placement. Use a level to align the first tile.
  4. Begin installing with the bottom left corner of the pattern and work your way up and right.
  5. Peel off the other side of the adhesive tabs.
  6. Press the tile firmly to the wall surface for 20 seconds. It is very important that the first tile is placed correctly.
  7. Repeat steps 1-5 for all tiles. Ensure that each tile properly aligns with previous tiles.

EchoTile Geometry Spiral Installation Guide

What’s included in a box:

  • Opt 1) 40 Oblong Pacific40 Oblong Navy
  • Opt 2) 40 Oblong Pacific40 Oblong Wine
  • Opt 3) 40 Oblong Mushroom40 Oblong Navy
  • 4 bags of 70 adhesive tabs

Tools needed (not included): 

  • Level
  • Measuring Tape
  • Pencil

Notes: Adhesive tabs may pull finish or paint off of the wall when removed. It is not recommended to use adhesive tabs on wood, brick, or other textured surfaces. Construction adhesive is recommended for installation on textured surfaces, ceilings, and high traffic areas. Adhesive tabs are not reusable. If a tile was placed incorrectly, re-apply the tile to the surface using a new set of adhesive tabs.

Tiles are cut on a grain and can reflect light differently, looking slightly lighter or darker depending on placement. When applying the tiles, ensure the color of the tiles complements your light source. Rotate the tile if color varies from the adjacent tile.

  • Option 1: Geo Cool Serenity | Pacific and Navy
  • Option 2: Geo Iron & Wine | Pacific and Wine
  • Option 3: Geo Cool Serenity | Mushroom and Navy
Installation

Oblong Tiles require (3) 1”x1” adhesive  tabs per tile for proper mounting and installation. Easy peel tabs have the same amount of adhesive on each side and will adhere to painted surfaces, dry wall, or smooth cement. Patterns are made to be repeatable. If more tiles are desired visit us at www.store.kireiusa.com to purchase another pattern bundle or extra adhesive tabs.

How to apply adhesive tabs and install tiles: 

  1. Clean the wall surface of application by wiping with a damp cloth or wet rag. Do not apply tiles to the surface until it is completely dry.
  2. Peel off one side of the adhesive tab. Place tab on tile and press firmly for 20 seconds. Repeat this step for all designated tab placements.
  3. Measure out and mark all pattern edges on the wall for desired placement. Use a level to align the first tile.
  4. Begin installing with the bottom left corner of the pattern and work your way up and right.
  5. Peel off the other side of the adhesive tabs.
  6. Press the tile firmly to the wall surface for 20 seconds. It is very important that the first tile is placed correctly.
  7. Repeat steps 1-5 for all tiles. Ensure that each tile properly aligns with previous tiles.

EchoTile Geometry Angle Installation Guide

What’s included in a box: 

  • Opt 1) 20 Delta Navy20 Delta Pacific
  • Opt 2) 20 Delta Wine20 Delta Speckled Gray
  • Opt 3) 20 Delta Pacific20 Delta Mushroom
  • 2 bags of 70 adhesive tabs

Tools needed (not included): 

  • Level
  • Measuring Tape
  • Pencil

Notes: Adhesive tabs may pull finish or paint off of the wall when removed. It is not recommended to use adhesive tabs on wood, brick, or other textured surfaces. Construction adhesive is recommended for installation on textured surfaces, ceilings, and high traffic areas. Adhesive tabs are not reusable. If a tile was placed incorrectly, re-apply the tile to the surface using a new set of adhesive tabs.

Tiles are cut on a grain and can reflect light differently, looking slightly lighter or darker depending on placement. When applying the tiles, ensure the color of the tiles complements your light source. Rotate the tile if color varies from the adjacent tile.

  • Option 1: Geo Cool Serenity | Navy and Pacific
  • Option 2: Geo Iron & Wine | Wine and Speckled Gray
  • Option 3: Geo Cool Serenity | Pacific and Mushroom
Installation

Delta Tiles require (3) 1”x1” adhesive tabs per tile for proper mounting and installation. Easy peel tabs have the same amount of adhesive on each side and will adhere to painted surfaces, dry wall, or smooth cement. Patterns are made to be repeatable. If more tiles are desired visit us at www.store.kireiusa.com to purchase another pattern bundle or extra adhesive tabs.

How to apply easy peel adhesive tabs: 

  1. Clean the wall surface of application by wiping with a damp cloth or wet rag. Do not apply tiles to the surface until it is completely dry.
  2. Peel off one side of the adhesive tab. Place tab on tile and press firmly for 20 seconds. Repeat this step for all designated tab placements.
  3. Measure out and mark all pattern edges on the wall for desired placement. Use a level to align the first tile.
  4. Begin installing with the bottom left corner of the pattern and work your way up and right.
  5. Peel off the other side of the adhesive tabs.
  6. Press the tile firmly to the wall surface for 20 seconds. It is very important that the first tile is placed correctly.
  7. Repeat steps 1-5 for all tiles. Ensure that each tile properly aligns with previous tiles.

EchoTile Geometry Maximal Installation Guide

What’s included in a box:

  • Opt 1) 20 Delta Navy20 Delta Pacific80 Oblong Speckled Gray
  • Opt 2) 20 Delta Wine20 Delta Speckled Gray80 Oblong Pacific
  • Opt 3) 20 Delta Pacific20 Delta Mushroom80 Oblong Navy
  • 6 bags of 70 adhesive tabs

Tools needed (not included):

  • Level
  • Measuring Tape
  • Pencil

Notes: Adhesive tabs may pull finish or paint off of the wall when removed. It is not recommended to use adhesive tabs on wood, brick, or other textured surfaces. Construction adhesive is recommended for installation on textured surfaces, ceilings, and high traffic areas. Adhesive tabs are not reusable. If a tile was placed incorrectly, re-apply the tile to the surface using a new set of adhesive tabs. Tiles are cut on a grain and can reflect light differently, looking slightly lighter or darker depending on placement. When applying the tiles, ensure the color of the tiles complements your light source. Rotate the tile if color varies from the adjacent tile.

  • Option 1: Geo Cool Serenity Navy, Pacific, and Speckled Gray
  • Option 2: Geo Iron & Wine Wine , Speckled Gray, and Pacific
  • Option 3: Geo Cool Serenity | Navy, Pacific and Mushroom
Installation

Oblong and Delta Tiles require (3) 1”x1” adhesive tabs per tile for proper mounting and installation. Easy peel tabs have the same amount of adhesive on each side and will adhere to painted surfaces, dry wall, or smooth cement. Patterns are made to be repeatable. If more tiles are desired visit us at www.store.kireiusa.com to purchase another pattern bundle or extra adhesive tabs.

How to apply adhesive tabs and install tiles:

  1. Clean the wall surface of application by wiping with a damp cloth or wet rag. Do not apply tiles to the surface until it is completely dry.
  2. Peel off one side of the adhesive tab. Place tab on tile and press firmly for 20 seconds. Repeat this step for all designated tab placements.
  3. Measure out and mark all pattern edges on the wall for desired placement. Use a level to align the first tile.
  4. Begin installing with the bottom left corner of the pattern and work your way up and right.
  5. Peel off the other side of the adhesive tabs.
  6. Press the tile firmly to the wall surface for 20 seconds. It is very important that the first tile is placed correctly.
  7. Repeat steps 1-5 for all tiles. Ensure that each tile properly aligns with previous tiles.

EchoTile Geometry Block Installation Guide

What’s included in a box:

  • Opt 1) 20 Square Speckled Gray40 Oblong Pacific
  • Opt 2) 20 Square Wine40 Oblong Speckled Gray
  • Opt 3) 20 Square Navy40 Oblong Pacific
  • 4 bags of 70 adhesive tabs

Tools needed (not included):

  • Level
  • Measuring Tape
  • Pencil

Notes: Adhesive tabs may pull finish or paint off of the wall when removed. It is not recommended to use adhesive tabs on wood, brick, or other textured surfaces. Construction adhesive is recommended for installation on textured surfaces, ceilings, and high traffic areas. Adhesive tabs are not reusable. If a tile was placed incorrectly, re-apply the tile to the surface using a new set of adhesive tabs.

Tiles are cut on a grain and can reflect light differently, looking slightly lighter or darker depending on placement. When applying the tiles, ensure the color of the tiles complements your light source. Rotate the tile if color varies from the adjacent tile.

  • Option 1: Geo Cool Serenity | Speckled Gray and Pacific
  • Option 2: Geo Iron & Wine | Wine and Speckled Gray
  • Option 3: Geo Cool Serenity | Navy and Pacific
Installation

Geometry Tiles require (3–for Oblong) or (4–for Square) 1”x1” adhesive tabs per tile for proper mounting and installation. Easy peel tabs have the same amount of adhesive on each side and will adhere to painted surfaces, dry wall, or smooth cement. Patterns are made to be repeatable. If more tiles are desired visit us at www.store.kireiusa.com to purchase another pattern bundle or extra adhesive tabs.

How to apply adhesive tabs and install tiles:

  1. Clean the wall surface of application by wiping with a damp cloth or wet rag. Do not apply tiles to the surface until it is completely dry.
  2. Peel off one side of the adhesive tab. Place tab on tile and press firmly for 20 seconds. Repeat this step for all designated tab placements.
  3. Measure out and mark all pattern edges on the wall for desired placement. Use a level to align the first tile.
  4. Begin installing with the bottom left corner of the pattern and work your way up and right.
  5. Peel off the other side of the adhesive tabs.
  6. Press the tile firmly to the wall surface for 20 seconds. It is very important that the first tile is placed correctly.
  7. Repeat steps 1-5 for all tiles. Ensure that each tile properly aligns with previous tiles.

EchoTile Geometry Invader Installation Guide

What’s included in a box: 

  • Opt 1) 40 Delta Navy40 Delta Speckled Gray
  • Opt 2) 40 Delta Wine40 Delta Pacific
  • Opt 3) 40 Delta Navy40 Delta Mushroom
  • 4 bags of 70 adhesive tabs

Tools needed (not included): 

  • Level
  • Measuring Tape
  • Pencil

Notes: Adhesive tabs may pull finish or paint off of the wall when removed. It is not recommended to use adhesive tabs on wood, brick, or other textured surfaces. Construction adhesive is recommended for installation on textured surfaces, ceilings, and high traffic areas. Adhesive tabs are not reusable. If a tile was placed incorrectly, re-apply the tile to the surface using a new set of adhesive tabs.

Tiles are cut on a grain and can reflect light differently, looking slightly lighter or darker depending on placement. When applying the tiles, ensure the color of the tiles complements your light source. Rotate the tile if color varies from the adjacent tile.

  • Option 1: Geo Cool Serenity | Navy and Speckled Gray
  • Option 2: Geo Iron & Wine | Wine and Pacific
  • Geo Cool Serenity | Navy and Mushroom
Installation

Delta Tiles require (3) 1”x1” adhesive tabs per tile for proper mounting and installation. Easy peel tabs have the same amount of adhesive on each side and will adhere to painted surfaces, dry wall, or smooth cement. Patterns are made to be repeatable. If more tiles are desired visit us at www.store.kireiusa.com to purchase another pattern bundle or extra adhesive tabs.

How to apply adhesive tabs and install tiles: 

  1. Clean the wall surface of application by wiping with a damp cloth or wet rag. Do not apply tiles to the surface until it is completely dry.
  2. Peel off one side of the adhesive tab. Place tab on tile and press firmly for 20 seconds. Repeat this step for all designated tab placements.
  3. Measure out and mark all pattern edges on the wall for desired placement. Use a level to align the first tile.
  4. Begin installing with the bottom left corner of the pattern and work your way up and right.
  5. Peel off the other side of the adhesive tabs.
  6. Press the tile firmly to the wall surface for 20 seconds. It is very important that the first tile is placed correctly.
  7. Repeat steps 1-5 for all tiles. Ensure that each tile properly aligns with previous tiles.

 

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

,