Anker PowerConfUser Manual
At a Glance
| 1. Multi-function button2. Volume down button3 . Mute button4. Phone call button5. Volume up button6. Status LED7. Power LED | 8. Power button9. Bluetooth button10. Bluetooth LED11. USB port (Type-A) for charge out12. Audio output port13. USB port (Type-C) for charge in |
Connecting
a) Connect to your computer by using a USB cable.
b) Connect to your computer or mobile device via Bluetooth pairing.Power on this product for the first time, it will automatically enter the Bluetooth pairing mode.
 |
Press | Enter Bluetooth pairing mode |
 |
Flashes blue | Bluetooth pairing |
 |
Steady blue | Bluetooth connected |
- Each time you power on the product, it will automatically connect with the last successfully connected device if available.
- To disconnect Bluetooth, press the Bluetooth button again.
Powering On/Off
Press and hold the power button for 2 seconds to power on. The status LED will light on clockwise and then fade out. To power off, press and hold the power button for 2 seconds.
Power LED behavior
 |
Steady white | Power on |
 |
Light off | Power off |
- Once connected to your computer, it will automatically power on.
- It will automatically power off after 30 minutes of inactivity or no source.
 |
Press or press and hold | Volume up / down |
 |
Press | Answer / End a call |
| Press and hold for 2 seconds | Reject a call | |
 |
Press | Mute or restore the microphone |
 |
Press | Play / Pause music |
Status LED behaviors
| Lights up white for 2 seconds | USB connection to the computer |
| Breathes green | Coming call |
| Lights up blue partly | Sound direction detected |
| Lights up blue clockwise or counterclockwise | Increase or decrease volume |
| Turns red | Muted |
| Lights up green | Press the Power button to check the battery level |
Charging
a) Charging this product
Power LED behavior
| Steady red | Being charged |
| Steady white | Fully charged |
| Flashes red | Low battery |
b) Charging an external device
- When powered off or being charged, it won’t charge out.
- When the remaining battery is less than 30%, the charge out current will be 5V
1A; if less than 10%, it won’t charge out.
Audio Output
Connect an external speaker to the AUX jack of this product by using an AUX cable (not provided). The audio will be played through the speaker.
Soundcore App
Download the Soundcore app for the software updates.
Specifications
Specifications are subject to change without notice
| Charge input | 5V  2A |
| Charge out | 5V 2.1A |
| Rated output power | 3W RMS |
| Battery capacity | 6700 mAh |
| Charging time | 4 hours |
| Talktime | 24 hours |
| Driver size | 1 x 1.75” (full range) |
| Frequency response | 20 Hz – 20 kHz |
| Bluetooth version | V 5.0 |
| Bluetooth range | 10 m / 33 ft |
Customer Service
report this ad18 Month limited warrantyLifetime technical supportOur warranty is additional to the legal right consumers have for this product.
[email protected][email protected] (For the Middle East and Africa Only)
+1 (800) 988 7973 (US) Mon-Fri 9:00 – 17:00 (PT)+44 (0) 1604 936200 (UK) Mon-Fri 6:00 – 11:00 (GMT)+49 (0) 69 9579 7960 (DE) Mon-Fri 6:00 – 11:00+971 42463266 (Middle East & Africa) Sun-Thu 9:00 – 17:30 (GMT+4)+971 8000320817 (UAE) Sun-Thu 9:00 – 17:30 (GMT+4)+966 8008500030 (KSA) Sun-Thu 8:00 – 16:30 (GMT+3)+965 22069086 (Kuwait) Sun-Thu 8:00 – 16:30 (GMT+3)+20 8000000826 (Egypt) Sun-Thu 7:00 – 15:30 (GMT+2)
[xyz-ips snippet=”download-snippet”]