DIGITUS DS-55202 HDMI KVM Extender over IP User Manual

HDMI KVM Extender over IPManualDS-55202 Rev. 2 

Important Safety Instruction

  1. Do not mix up the transmitter and receiver before instruction.
  2. Do not unplug the device, when it is in use; keep your distance from inflammable and explosive devices.
  3. Power Supply: DC 5V, Use only the supplied power supply unit, do not use the power supply if it is damaged.

Product Introduction

This is an HDMI KVM EXTENDER, is made up of a transmitter unit (local site) and a receiver unit (remote site). The HDMI signal can be extended up to 120 meters via network cable, and the resolution supported is up to It allows access to a computer system from a remote console by USB connectors (USB keyboard and mouse). It is perfect for factory and construction sites, or any type of installation where the console needs to be in a conveniently accessible location. It is also useful for control and security purposes. Therefore it is wildly used in command centers, data control centers, operation rooms in the military, banks, government, enterprise, etc.

Features

  1. Extend HDMI signal up to 120 meters via a single network cable
  2. Over IP connection through the network switch
  3. High resolution supported is up to
  4. LED indicators, know the status of power and USB connection easily
  5. Support KVM function, remote control conveniently
  6. Support LAN standard 802.3 Ethernet 10/100/1000Mbps
  7. Compliant STP and UTP CAT5/5E/6 network cables
  8. Aluminum alloy housing design, stable and durable

Package Content

  • HDMI KVM EXTENDER TX x 1pcs
  • HDMI KVM EXTENDER RX x 1pcs
  • USB Cable x 1
  • Power supply x 2pcs
  • User manual x 1pcs
  • CD (Windows USB driver) x 1pcs

Installation Requirements

  1. Source devices: PC or other devices with HDMI graphics card.
  2. Display devices: With HDMI input port, SDTV, HDTV, and monitor.
  3. Network cables: UTP/STP CAT5E/6 network cables, which following the standard of IEEE-568B.
  4. Transmission length: CAT5: 80m/CAT5E: 100m/CAT6: 120m.

Panel Introduction

1. HDMI EXTENDER TX (Transmitter)

① Power indicator② USB connection indicator③ LAN signal output④ Reset button ⑤ Power input (DC5V)⑥ HDMI signal input⑦ USB port: to connect with PC

2. HDMI EXTENDER RX (Receiver)

① Power indicator② USB connection indicator③ LAN signal input④ Reset button ⑤ Power input (DC5V)⑥ HDMI signal output⑦ USB port: to connect with keyboard/mouse

Installation Procedures

  1. How to make a CAT5E/6 network cableFollow the standard of IEEE-568B:1- Orange/white2- Orange3- Green/white4- Blue5- Blue/white6- Green7- Brown/white8- Brown
  2. General Connection DiagramTransmission distance can be up to 120 meters for 1080p over one CAT6NOTE: Point to multi-point connection via switch is supported too, but under point to multi-point configuration, it is strongly recommended to operate KVM function on one receiver only at the same time.
  3. Over IP Connection DiagramNOTE: Transmission distance depends on the type of network cable, CAT5: 80m, CAT5E: 100m, CAT6: 120m.Remark: Install driver SoftwareThe driver is only needed if the USB keyboard mouse cannot be activated automatically in the first time connection. (Only Windows USB driver available)

FAQ

Q: Yellow light of the LAN port is flashing but slowly?A: Check whether HDMI Extender Transmitter and HDMI Extender Receiver is reversed;Check whether HDMI source device output HDMI signal correctly; Change the HDMI cable of the Transmitter.Q: Yellow light of the LAN port is flashing quickly but no display?A: If the HDMI source is a graphics card please set the resolution to be supported by the display Check whether HDMI cable of Receiver is well connected; Change the HDMI cable of the Receiver.Q: Yellow Led light of the LAN port is not light?A: Check connection of network cable;The network cable is too long.Q: Abnormal color display or flashing after all the devices is well connected?A: Please press the reset button of the HDMI extender.Make sure the network cable is made according to the standard of IEEE-568B.Q: USB does not work?A: Install the USB driving software, check and make sure the USB cables are connected well, then reset Transmitter or Receiver.

Specification

Part No. DS-55202
Technical Transmitter-TX Receiver-RX
Signal format HDMI 1.3
HDCP HDCP 1.2
HDMI connector Type A, 19 pins, Female
Transmission distance CATS/80 meters, CAT5e/100meters, CAT6/120meters
LAN connector R1-45
Video bandwidth 70Mbps
resistance 750
Video Latency 70ms
HDMI resolution supported 640* 800*1024* 1280*1360* 1440*1400* 1680*1920*
Audio support PCM (44.1KHz, 48KHz)
KVM function (connect with PC,keyboard/mouse) connect with PCkeyboard/mouse connect with
Switch Connection yes
Input 1xHDMI1XUSB (to connect with PC) 2xUSB (to connect with keyboard/mouse)1xR145
Output 1xR145 1xHDMI
Mechanical Transmitter-TX Receiver-RX
Housing Metal enclosure
Dimension 109.6 (L) x 89.5 (w) x 26.3 (H) mm
Net weight 160g 1170g
Power supply DC5V 1A
Power consumption < 3.5W I < 3.5W
Operation temperature 0-60°C
Storage temperature -20-70°C
Relative humidity 20-90% (no condensation)

This is a Class A product. In-home environment, this product may cause radio interference.In this case, the user may be required to take appropriate measures.Hereby Assmann Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below-mentioned manufacturer address.www.assmann.comAssmann Electronic GmbHAuf dem Schüffel 358513 LüdenscheidGermany

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,