STARSPACE Chair SKY-032 Instruction Manual

Table of Contents

INSTRUCTION MANUALMODEL: SKY-032

ASSEMBLY GUIDE

Congratulations, you are now the owner of a brand new STAR SPACE chair! Following this assembly guide, you will find a quick start guide to assemble your STAR SPACE chair. We highly recommend checking out our Assembly Videos as well for even more detailed and visual instructions. If you run into any difficulty during the embly, remember to check out the Assembly Video to see if you’ve missed anything. If you’re unable to resolve your problems, drop us an email as well and our support team will assist you.

PACKAGE LIST

ASSEMBLY INSTRUCTION

CAUTION Make sure all bolts and screws are fully tightened before using a chair. Lubricate all moving parts and tighten all bolts/ screws every 6 months or whenever needed.

STEP 1Connect Star Base(B) and Five Base Legs(A) with Ten M6*15mm Bolts(G), using the Wrench(L), press the Base Cover(C) to the Star Base.

STEP 2Turn the Star Base(B) upside down, then press the Casters(D) into the holes at the end of each base leg, insert the Lift(E) into the center hole of the StarBase, the Lift Cover(F) should be placed over the Lift.

STEP 3Align the Seat Plate(M) over the pre-drilled holes underneath the Seat Cushion(I), make sure that the front of the seat plate is facing the front of the Seat Cushion. Attach the Seat Plate to the Seat Cushion using Four Bolts(G1), tighten all the bolts with the Wrench(L), being careful not to miss-thread the bolts or damaged the seat.

STEP 4Turn the Seat Cushion(I) upright and align the center hole of the seat plate over the lift, then push the seat cushion down onto the lift firmly until the connection is secure.

STEP 5Attach the Arms(J) to the Seat Cushion(I) with eight 1/4 Bolts (G2), using the Wrench(L).NOTE Armrests are labeled with an “L” (left) or “R” (right) to show which sides they should be placed on.Tight bolts to 50% at the irst, after all bolts were installed, tight all bolts to 100%.

STEP 6Press plastic covers(K) to the armholes.

INSTRUCTIONS FOR USE

Adjustable Armrest
Tilt Tension: Long stem under the seat cushion with knobTo increase tensionWhile seated, turn the knob forward (toward + sign).To decrease tensionWhile seated, turn the knob backward (toward – sign).
Operating the tilt lockout To let your chair tilt back, pull the control handle out.To stop your chair from tilting, sit forward, then push the control handle in.

SAFETY AND MAINTENANCE

Do not stand on the chair, Do Not use the chair as a stepladder.
Use this product for seating one person at a time.
Do not use the chair unless all bolts and screws are firmly secured.
Avoid contact with sharp objects to prevent puncturing the fabric.
Every 6 months, check all bolts and screws to ensure they are tight.
To clean, spot clean only using a damp towel and mild cleaner, first test on a small, obscure area of fabric.
Chair weight limit not to exceed 250 lbs.

SAFETY INFORMATION

LIMITED WARRANTY

STAR SPACE promises to repair or replace any STAR SPACE chair that is found to be defective in material or workmanship within one year from the date of original purchase so long as you, the original purchaser still owns it. This is your sole and exclusive remedy. This warranty is subject to the provisions below.

EXCLUSIONS:This warranty does not apply and no other warranty applies to:

Normal wear and tear, which are to be expected over the course of ownership.
Misuse, abuse or excessive use of the product.
Modifications or attachments to the product that are not approved by STAR SPACE.
Products that were not installed, used, or maintained in accordance with product instructions and warnings.
Products used for rental purposes or unauthorized retail activities.

Seating Usage: Normal use for seating is identified as the equivalent of a single shift, forty- (40) hour workweek. To the extent that a seating product is used in a manner exceeding this, the applicable warranty period will be reduced in a pro-rata manner.RETURN POLICY： We adopt a 30 days return policy which means that all products purchased on this website may be returned to us within the timeframe. You need to contact us within 30 days after the product(s) came into your possession and the product(s) must be returned to us without any undue delays.Returned products must be returned in the same condition as they were sent and they must be sent in its original packaging.If the product is not faulty, (i.e. if you changed your mind or if you are unhappy with the product for some other reason), the cost of shipping will fall on you. And it is your responsibility that the package arrives safely to us so we recommend that you use a courier service that offers shipment tracking.If the product is faulty when you receive it please contact us and we will help you out.We reserve the right to give a partial refund in cases the product(s) is not in an unused condition, is damaged or have missing parts not due to our error.

HOW RETURNS WORK：Contact us through the contact form on our website and attach the invoice to the message as proof of purchase. And please also write the reason for return.We will then get back to you as soon as possible with information on where to send the product(s).As soon as we have received the product(s) and made an inspection we will inform you of our decision. If a refund is approved we will automatically credit the purchase to your credit card or original method of payment.

CONTACT US

+1 628-222-2513[email protected]www.starspacechair.com