ROCKVILLE HTS8 8 inch Complete Powered all in One Entertainment System Owner’s Manual

ROCKVILLE HTS8 8 inch Complete Powered all in One Entertainment System

Thank you for purchasing this Rockville HTS8 complete powered all in one entertainment system.

The Rockville HTS8 is a complete all in one home theater system! You will not need to purchase anything else. This has everything built in! Each speaker has a powerful 8 woofer for incredible bass and a 1.5 neodymium silk dome tweeter for incredible highs. These speakers have Bluetooth, USB, SD, FM radio, and all of the inputs and outputs you will ever need. We also added a ¼ mic input so this system can be used for karaoke. Unlike a lot of home theater systems, the Rockville HTS8 features a Bi-Amplifier design. The woofer, as well as the tweeter, has an individual Frequency Optimized Amplifier (FOA). These amps guarantee that there is no wasted energy in the amplification stage and an absolute minimum of harmonic distortion. The efficiency of our class D design is in excess of 90% with zero discernible hiss or white noise. We are one of the leading speaker manufacturers in the USA, and we have a state of the art manufacturing process.

Please read this installation guide carefully for proper use of your Rockville HTS8 home theater speaker system. Should you need technical assistance, please call our technical help line at 1-646-758-0144, Monday through Friday, 9am to 5pm EST.

Included

  • (8) Isolation pads
  • (8) Brass spikes
  • (8) Rubber spikes
  • (4) Cable clips
  • (4) Cable ties
  • 16) Screws

IMPORTANT SAFETY INSTRUCTIONS

TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE AMPLFIER PLATE. NO USER SERVICEABLE PARTS INSIDE. WE RECOMMEND TAKING THE UNIT TO A QUALIFIED SERVICE TECHNICIAN FOR ANY REPAIRS.

  • Do not place these speakers on an unstable surface. The speaker may fall over, causing serious injury to a child or adult and serious damage to the unit.
  • Do not use these speakers near water; for example, near a bathtub, sink, in a wet basement, or near a swimming pool.
  • The speakers should be situated away from heat sources such as radiators, heat registers, stoves, or other devices that produce heat.
  • These speakers should be connected to a power supply outlet of the same voltage as that which is specified on the amp plate of the unit. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits from the unit.
  • Clean only with a soft damp cloth. Unplug this product from the wall outlet before cleaning.
  • Upon completion of any servicing or repairs, request that service center/shop uses factory authorized replacement parts. Replacement with unauthorized parts may result in fire, electrical shock, or other hazards.

FUNCTIONS

REMOTE CONTROL

: power/standbyUSB: select USB inputSD: select SD inputFM: enter FM radio mode AUX: select AUX inputBT: enter Bluetooth modeOPT: select optical input: previous track/next track,CH+ CH- Use to navigate FM stations : play/pause in USB/SD/BT modesVOL +/-: master volume controlMIC PRIORITY: microphone priority modeREPEAT: repeat one song/repeat all songs/shuffleMIC +/-: adjust microphone volumeECHO +/-: adjust reverb volumeTUNE +/-: manually tune FM stations0 — 9: number pad used to direct select tracks when in USB/SD modeRESET: Restore factory settingsMUTE: cancel unit sound

REAR PANEL (MASTER UNIT)

  1. Master volume
  2. SD input
  3. USB input
  4. Bass level adjustment
  5. MP3/FM radio controls
  6. Treble level adjustment
  7. FM antenna
  8. Balanced ¼ input
  9. 3.5mm line input
  10. Power switch
  11. Optical input
  12. Unbalanced RCA input
  13. Fuse compartment
  14. IEC AC power socket
  15. Unbalanced RCA output
  16. Output to left speaker
  17. LCD display

SET UP

Place speakers in desired position. Using the included proprietary noise rejecting cable, connect the master speaker to slave unit. Now plug the master unit to the nearest AC outlet.

CHANGING INPUT MODE

To change input mode when the remote control is unavailable, follow these steps.

  1. With the unit powered on, press the  (next track) button. The display on the front of the master unit will show the volume increasing.
  2. Press and hold the (play/pause) button to change input modes. The display on the front will change to indicate the input source: AUX – 3.5mm or RCA LINE input, FM FM Radio Tuner, USB – USB/SD input, BT – Bluetooth, OPT – Optical Input.

BLUETOOTH

To connect your iPod, iPhone, MP3 player, Android phone or any other Bluetooth capable device follow the steps listed below.

  1. Make sure the unit is plugged in and the power switch is in the ON position.
  2. Press the BT button on the remote control until the digital read out shows “BT”.
  3. Turn on the Bluetooth feature on your device and ensure that it is in “discoverable” mode. Search for “Rockville” on your list of available devices and select it.
  4. Listen for for the beep which indicates the devices are successfully paired.
  5. Press and hold Next/Previous track buttons on the unit’s playback panel to raise or lower the volume. You can also adjust the volume using the unit’s Master volume knob or the volume controls on your Bluetooth device. All three can be maxed out for maximum performance without any distortion.

USB/SD

For USB/SD playback follow the steps listed below. Please note, the USB does not support charging. The following formats are supported: WAV/FLAC/MP3/WMA.

  1. Make sure the unit is plugged in and the power switch is in the ON position.
  2. Press the USB or SD button on the remote control to enter USB or SD mode.
  3. Plug in your SD card or USB flash drive. The unit will automatically read the files and begin playing music.
  4. Use the buttons on the unit or on the remote to control music playback.
  5. Press and hold Next/Previous track buttons on the unit’s playback panel to raise or lower the volume. You can also adjust the volume using the unit’s Master volume knob or the volume buttons on the remote control (please note: remote control volume buttons control the Master volume). Both can be maxed out for maximum performance without any distortion.

RCA

The RCA inputs can be used to connect stereo signal sources such as TVs, Digital set top boxes, game consoles, DVD players, CD, players, etc. For playback via RCA inputs follow the steps listed below.

  1. Make sure the unit is plugged in and the power switch is in the ON position.
  2. Press the AUX button on the remote control. The digital read out should read “AUX”.
  3. If multiple sources are connected, use the remote button to switch between the sources.

LINE IN

Use the 3.5mm Line jack to connect computers, cellphones, or any other external sound source with a 3.5mm output.

  1. Make sure the unit is plugged in and the power switch is in the ON position.
  2. Press the AUX button on the remote control. The digital read out should read “AUX”.

OPTICAL

Many TVs, Digital set-top boxes, game consoles, and DVD players have optical (fiber optic) outputs. To connect via Optical input, follow the steps listed below.

  1. Make sure the unit is plugged in and the power switch is in the ON position.
  2. Use a digital optical audio cable to connect the speakers to the source.
  3. Set your TV’s sound output to external speakers.

Please note: If you are having issues with sound output, go into your TV’s audio settings and make sure to deactivate Dolby Pro-Logic, Dolby ATMOS, etc. and select PCM format.

FM RADIO

For FM radio follow the steps listed below.

  1. Make sure the unit is plugged in and the power switch is in the ON position. Be sure to connect the included FM antenna.
  2. Press the FM button on the remote control. The digital read out should show numbers.
  3. While in FM mode, press the AUTO button to activate automatic station search. Use the CH+/- buttons to manually search through stations.

MIC INPUT

To use the system for karaoke connect any microphone via the ¼ input.

RCA OUTPUT

Use these RCA outputs to connect a subwoofer or a second set of speakers.

FEATURES

  • Dual 8 complete multi application speaker system
  • 1000 watt powered bi-amped speakers (pair) · RMS Power: 250 watt
  • Two-way speaker design
  • Full range class “D” amplifier circuitry with auto-switching power supply
  • Quad Amp Design: Each driver features frequency specific Independent Amplifiers
  • Built-in Bluetooth with 150 foot range and perfect interference-free sound quality
  • Built-in USB playback
  • Built-in SD card playback
  • Supports WAV, FLAC, MP3, WMA file types · Built-in FM radio with crystal clear reception
  • Full function remote included
  • Ferro fluid enhanced 1 neodymium silk dome tweeter with metal grill protection
  • Tweeter has 1 voice coil diameter
  • Curved front bezel design eliminates standing wave distortion · Injection molded polypropylene cone woofer
  • Rubber woofer surrounds increases sound quality and eliminates unwanted distortions
  • Computer optimized electronic crossover network supplies amazing sounding highs, ows, and mids
  • Specially wound voice coils produce accurate response along entire frequency spectrum
  • 110 volt compatible
  • One complete pair with master/slave output connection
  • Includes a noise rejection cable to connect the 2 speakers together

SPECIFICATIONS

Amplifier: Class D Mono BlockQuad Amp Design: Each Driver Features Frequency Specific Independent Amplifier.Low-Mid Frequency: 8 Polypropylene Cone with Rubber SurroundHigh-Frequency: 1 Neodymium Silk Dome TweeterFrequency Response: 30Hz ­ 20kHzSPL Peak: 106dB @1w/1mSpeaker Power Output (per pair): 250 Watts RMS/1000 Watts Peak Power Output (per speaker): 125 Watts RMS/500 watts PeakTweeter Power Output: 30 Watts RMSSpeaker Impedance: 4 OhmTweeter Impedance: 6 OhmLow Frequency Equalization Adjustment: -4dB – +4dBHigh Frequency Equalization Adjustment: -4dB – +4dBInput Connectors: Unbalanced RCA, Balanced ¼, Optical, 3.5mm, USB 2.0, SDOutput Connectors: unbalanced RCAFuse Rating: 250V/5AAC Power Input: 120V (60Hz)Dimensions (H x W x D): 15.35 (390mm) x 9.92 (252mm) x 12.2 (310mm) Weight: Active unit: 26 lbs (11.8kg)Slave unit: 9 lbs (4kg)

TROUBLESHOOTING

PROBLEM SOLUTION
No power
  1. Make sure the unit is plugged in and the power switch is in the ON position.
  2. Check that the power cable is plugged in tightly to the unit.
  3. Check and replace the fuse if necessary. See fuse replacement diagram on the next page.
No sound
  1. Make sure you’ve selected the proper source.
  2. For USB/SD audio make sure that both volume controls are set properly (see USB/SD section for volume settings).
  3. For Bluetooth audio make sure that all 3 volume controls are set proper- ly (see Bluetooth section for volume settings).
  4. Make sure you’ve selected external speakers in your TV’s sound output settings.
  5. Deactivate Dolby Pro-Logic, Dolby ATMOS, etc. and select PCM in your TV’s sound format settings.
Bluetooth pairing fails
  1. Check to see that both devices are turned on and that your Bluetooth device is discoverable.
  2. Turn both devices off and then on again.
  3. Make sure you’ve selected the proper source.
  4. Make sure that the Bluetooth device is within 5 feet of the unit.
  5. Move both devices away from other Bluetooth devices, microwaves, wireless routers, and other electronics.
  6. Make sure that all 3 volume controls are set properly (see Bluetooth section for volume settings).
  7. Make sure that the unit is not paired to a previously paired device.
Files on SD or USB memory device will not play back
  1. Make sure you’ve selected the proper source.
  2. Make sure that the audio files are in the specified format (see Features section).
No sound when receiving TV input
  1. Select proper audio option from TV.
  2. If using RCA cables, make sure that they are plugged into the output jacks of the TV and the input jacks of the speaker.

FUSE REPLACEMENT

  1. Use a screwdriver to release the fuse holder.
  2. Remove the fuse holder.
  3. Remove the fuse.
  4. Replace the fuse.
  5. Re-insert the fuse holder.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Responsible party name: RockvilleAddress: 600 Bayview Ave,Entrance A, Inwood, NY 11096

Hereby declares that the product Rockville HTS8 complete powered all in one entertainment system complies with FCC rules as mentioned in the following paragraph:

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RockvilleAudio.com

report this ad

© 2020 ROCKVILLE // Features and specifications are subject to change and or improvement without notice.

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,