Instruction ManualFi70 Three-Way Wireless High Fidelity Music Systemfluance.com/support
FCC STATEMENT
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1)
this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operationWarning:This equipment has been tested and is found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Warning:Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.IC STATEMENT / CAN ICES-3 (B)/NMB-3 (B)Industry Canada StatementOperation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
SAFETY INFORMATION
- Read all instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) thatproduce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged. Liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Apparatus shall not be exposed to dripping or splashing, and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
- The battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
- The direct plug-in adapter is used as a disconnect device, the disconnect device shall remain readily operable.
- WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
This device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. This Class[B] apparatus complies with Canadian ICES-003.This marking indicates that this product should not be disposed of with other household wastes throughout North America.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.FEATURES
- Hand-built internally braced MDF wood cabinet for an overall natural sound
- Butyl rubber surrounds provide longer excursion, better linearity, and increased durability
- Ferro-fluid cooled tweeters for longer life
- Powerful 280W integrated amplifier boasts extremely accuracy for a well-defined sound
- Two finely tuned bass ports control low frequency and improve efficiency
- Bluetooth auto-pairing technology with aptX premium audio
- A detachable base creates a commanding stance while also providing additional stability
- Adjustable bass and treble equalizer to fine-tune to your performance preference
- Sleek touch panel controls with illuminated LED display (dimmable)
- Magnetic grills detach to reveal a smooth finish with no visible fasteners
- 2.1A USB port for rapid charging of your devices and a 3.5mm auxiliary input allows for direct connection
- Optical Toslink input allows for direct connection to a television
- Digital AM/FM radio and alarm clock functionality
WHAT’S INCLUDED
- High-Performance Wireless Music System
- Low Profile Stand with Mounting Hardware
- Remote Control
- AM/FM Radio Antennas
- Quick Start Guide
- 2 Year Parts and Labor Warranty
- Lifetime Customer Support
DisclaimersMaximum line of sight for Bluetooth transmission range is 33 feet. Obstacles may decrease transmission distance.Certain Bluetooth features, including those listed, may not be supported by all compatible Bluetooth-enabled devices, and/or thefunctionality of such features may be limited in certain devices, or by certain wireless carriers. We reserve the right to change models, configurations, or specifications without notice or liability. Product may not be exactly as shown. ©2016 FLUANCE®. FLUANCE®, the FLUANCE® logo, and any other FLUANCE® marks may be registered. All other trademarks areproperty of their respective owners.
ASSEMBLING THE STAND TO THE CABINET
POWERING THE UNIT
SETTING UP BLUETOOTH
OPTIONAL CABLE SET UP
SET TIME
SET SLEEP TIMER
SET ALARM
SET RADIO PRESETS
OPERATION
Pairing multiple devicesAlthough the Fluance Fi70 can only play music from one device at a time, it can memorize up to 8 device profiles. Switching from one device to another:
- Access the SETTINGS and turn the Bluetooth function of the device OFF.
- The Fluance Fi70 can now be connected to a different device.
- Reconnecting your deviceIf you move out of range or turn off the Bluetooth feature on your device, the Fluance Fi70 will disconnect from your device. Toreconnect, simply turn the Bluetooth feature back on or move within 33 feet (line of sight) of the Fluance Fi70.Unit will auto-pair if it was the last device connected. If not, please refer to the pairing instructions.Out of Range or Lost SignalIf the music device is out of range (beyond 33 feet) of the Fluance Fi70 or if there is something blocking the Bluetooth signal,the Bluetooth logo LED will flash to indicate that the Bluetooth connection with the music device has been lost. To avoid a lost connection:
- Move the music device back into range (within 33 feet), and/or make sure there’s a clear line of sight and that there are noobstructions between the Fluance Fi70 and the device.
- Within 15 seconds, the connection will automatically be reestablished and the Bluetooth LED light will turn solid.
- If the connection is lost for more than 15 seconds, the connection will need to be reestablished. Follow the instructions in the“Reconnecting your device” section.
OPERATION
USB Charging Port
The USB Charging Port allows for quick and easy charging of your smartphone or tablet while still enjoying your music. The USB input cannot be used for playback.
- Connect one end of the USB Cable to the 2.1 A USB Charging Input on the Fluance Fi70.
- Connect the other end of the USB Cable to your Smartphone/Audio Device.
- You can continue to enjoy your music using your Smartphone/Audio Device while it is charging.
USB port is for charging smartphones and tablets only.
Reset PairingThe Reset Pairing button is used to unpair another paired device, allowing you to connect a new device to the Fluance Fi70.
- Press and hold the Play/Pause button on the Fluance Fi70 to break any existing Bluetooth connections.
- The unit will search for a new device for 30 seconds. After 30 seconds, if no new connection is made, it will auto-pair back to the previous device.
- You can also unpair the connection directly from your Smartphone by disabling the Bluetooth connection.
SPECIFICATIONS
Specifications are subject to change without notice. Measurements and weights may vary slightly.
| System Type | 2 Way 6 Driver Wireless Music System with Integrated Amplifier |
| Tweeter | Dual 1 Inch Silk Soft Dome Ferrofluid Cooled |
| Midrange | Dual 5-inch Woven Glass Fiber Composite Drivers with Butyl Rubber Surrounds |
| Woofer | Dual 8-inch Polymer Treated High Excursion with Butyl Rubber Surround |
| Bluetooth | 2.1 + EDR (Enhanced Data Rate); aptX codec |
| Input | 3.5mm Auxiliary Audio Input; 2.1 A USB Charging Input, Optical (Digital Toslink), FM/AM Radio Tuner |
| Frequency Response | 30Hz – 20KHz |
| Crossover Frequency | 150Hz / 2500Hz Phase Coherent — PCB Mounted Circuitry |
| Amplifier Power (RMS) | 280 Watts Continuous Average Output |
| Enclosure | Tuned Rear Port Bass Reflex Design |
| Cabinet | MDF Wood Cabinet |
| Internal Lead Wire | 18 gauge internal lead wire to reduce signal degradation |
| Power | 120V, 60 Hz |
| Dimensions (W x D x H) | 29.5 x 11 x 23.2 inch (without stand) 29.5 x 11 x 36 inch (with stand) |
| Weight | 81 lbs |
| FCC | Yes |
| ICES | Yes |
| cETLus | Yes |
TROUBLESHOOTING
| Issue | Device | Fluance Fi70 |
| No music from Fluance Fi70 speakers using Bluetooth |
|
|
| No music from Fluance Fi70 speakers
using Auxiliary Audio Cable |
|
|
| No music from AM/FM Tuner |
|
|
FAQ
What does the “Display” toggle do?The display toggle will cycle between 3 modes. Time, Source, and Display OFF.How do I adjust the Volume / Change the Bass or Treble?Select the equalizer using the settings button on the touch panel or using the Bass/Treble EQ buttons on the remote. Use the+/- buttons to increase or decrease volume accordingly. The range of the BASS/TREBLE is -10 to 10 and the range of volume is0 to 40.What is “Auto-Pairing” and how does it work?Auto-Pairing is a convenient connection feature implemented into all Fluance Bluetooth-enabled speakers. If the connectedThe Bluetooth-enabled device leaves the connection range of the Fi70 and returns at a later time, the device will automaticallyconnect. If the device’s Bluetooth function is disabled and then enabled at a later time, the device will automatically connectas well. Please note that the Fluance Fi70 will only auto-pair to the last device that it was connected to and if the Fi70 is set toits Bluetooth input.What does the “Display” toggle do?The display toggle will cycle between 3 modes. Time, Source, and Display OFF.How do I adjust the Volume / Change the Bass or Treble?Select the equalizer using the settings button on the touch panel or using the Bass/Treble EQ buttons on the remote. Use the+/- buttons to increase or decrease volume accordingly. The range of the BASS/TREBLE is -10 to 10 and the range of volume is0 to 40.What is “Auto-Pairing” and how does it work?Auto-Pairing is a convenient connection feature implemented into all Fluance Bluetooth-enabled speakers. If the connectedBluetooth-enabled device leaves the connection range of the Fi70 and returns at a later time, the device will automaticallyconnect. If the device’s Bluetooth function is disabled and then enabled at a later time, the device will automatically connectas well. Please note that the Fluance Fi70 will only auto-pair to the last device that it was connected to and if the Fi70 is set toits Bluetooth input.What is the purpose of the USB port on the back panel?The USB port is designed to charge any of your devices such as smartphones, tablets, music players, etc., however, it cannot beused for playing audio files with the Fi70.I can’t connect my device to the Fi70.Please ensure Bluetooth is enabled on your device and attempt to re-pair with the Fi70.Another device is connected to the Fi70 and I wish to connect my device.You can reset any Bluetooth connection by pressing and holding the “Play/Pause” button on the remote/touch panel. The Fi70will be available to connect to any new device for the next 30 seconds. If no device is found, the Fi70 will auto-pair back to thepreviously connected device. Please note only one device can be paired at a time.What is the range of the Bluetooth Connection?The Fi70 operates with Power Class 2 Bluetooth devices, which have a range of approximately 33’ feet (line of sight).What is the break-in period for Fluance speakers?The break-in period for our speakers is about 10 hours of playing time at normal listening volumes. After this period the driverswill have had enough movement to perform at their peak level.How you access your Bluetooth Settings may vary from one manufacturer to another. Maximum line of sight for Bluetoothtransmission range is 33 feet. Obstacles may decrease transmission distance.
WARRANTY INFORMATION
Fluance gives the following warranty to the original customer of each new Fluance product purchased from a dealer authorized byFluance. Fluance warrants that each new product, under normal use, is free from defects, subject to the terms and conditions setforth. If a defect should occur within the warranty period, repairs will be made free of charge for parts and labor when such defects are determined by us to be attributable to faulty materials or workmanship at time of manufacture.
Warranty PeriodThe FLUANCE® products listed below are warranted for parts and labor for the stated period from the date of original purchase and are subject to the terms and conditions of the warranty.Home Audio Passive Speakers: Lifetime WarrantyActive/Powered Speakers: 2 Year WarrantyHiFi Turntables: 2 Year Warranty
report this adWarranty Exclusions
- Products purchased from a dealer not authorized by Fluance.
- Products with the serial number defaced, altered, or missing.
- Defects resulting from disaster, accident, abuse, misuse, lightning, power surges, neglect, unauthorized modification, or water damage.
- Defects or damage as a result of repairs performed by a person or party not authorized by Fluance.
- Defects or damage occurring during shipping (claims should be made with the shipping company).
- Defect or damage as a result of connecting a product to an outlet with the incorrect voltage. Voltage converters must be used where applicable.
To Obtain Warranty ServiceShould your Fluance product require warranty service, please contact your Fluance Authorized Dealer and send your product fullyinsured and freight prepaid to the nearest Fluance authorized service center. Before sending to Fluance, you will be required to get a Return Authorization Number from your dealer.Products shipped without a valid Return Authorization Number will be refused. To avoid possible shipping damage, make sure the product is properly packaged and well protected. Include a copy of your original bill of sale as proof of warranty along with your name, home and/or work telephone number(s), a complete return address, and a detailed description of the faults.Products repaired within warranty will be returned freight prepaid. This warranty in itself is not considered a valid proof of purchase. When applying for warranty repairs, you must present the original copy of your bill of sale as proof of warranty.
References
[xyz-ips snippet=”download-snippet”]