CHAUVET DJ DJK44709 Cast Panel Pack User Guide
About This Guide
The Cast Panel Pack Quick Reference Guide (QRG) has basic product information such as operation, mounting, and technical specifications.
DisclaimerThe information and specifications contained in this QRG are subject to change without notice
LIMITED WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration.Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
- ONLY connect this product to a grounded and protected circuit.
- DISCONNECT from power before cleaning.
- DO NOT look at the light source when the product is on.
- Make sure the power cord is not crimped or damaged.
- Never disconnect this product from power by pulling on the cord.
- When mounting this product overhead, ALWAYS use a safety cable.
- DO NOT allow flammable materials close to the product when it is operating.
- DO NOT touch the product’s housing when it is on because it will be hot.
- The voltage of the outlet to which you are connecting this product must be within the range stated on the decal or rear panel of the product.
- This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose this product to rain or moisture.
- Always mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
- Be sure that no ventilation slots on the unit’s housing are blocked.
- Never connect this product to a dimmer or rheostat.
- Never carry the product by the power cord. Use only the hanging bracket or handle to carry this product.
- The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher temperatures.
- In the event of a serious operating problem, stop using immediately.
- DO NOT open this product. It contains no user-serviceable parts.
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
Contact
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or return a product. Refer to Contact Us at the end of this QRG for contact information.
What is Included
- 2 light fixtures (w/ barn doors)
- 2 external power supplies
- 2 tripods
- 2 carry bags
- Quick Reference Guide
To Begin
Unpack your Cast Panel Pack and make sure you have received all parts in good condition. If the box or contents appear damaged, notify the carrier immediately, not Chauvet.
AC Power
This pack comes with 2 external auto-ranging power supplies which work with an input voltage range of 100 to 240 VAC, 50/60 Hz and output 15 VDC, 3 A.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
DC Power
This product is compatible with Sony NP-F series batteries
Product Overview
Control Panel Description
Switch/Knob | Function |
Mode switch |
|
Knob 1 | Warm white (custom mix mode only) |
Knob 2 | Cool white (custom mix mode only) |
Knob 3 | Preset color temperature, low to high (preset color temperature mode only) |
Power switch |
|
Mounting
Before mounting with this product, read the Safety Notes
Mounting Diagram
Technical Specifications
Dimensions and Weight |
|
Length |
9.4 in (238 mm) |
Width |
8.6 in (218 mm) |
Height |
1.9 in (48 mm) |
Cast Panel Weight |
3.4 lb (1.6 kg) |
Note: Dimensions in inches are rounded. |
|
Power |
|
Parameter |
Input Voltage RangeVoltage Selection |
Cast Panel |
Fixed 15 VDC, 3 A Fixed |
External Power Supply |
Switching (internal) 100 to 240 VAC, 50/60 Hz Auto-ranging |
Parameter |
Consumption Operating current |
120 V, 60 Hz |
62 W0.8 A |
230 V, 50 Hz |
59 W0.54 A |
Light Source |
|
Type |
LEDLED |
Color |
Warm whiteCool white |
Quantity |
9696 |
Power |
40 W total |
Current |
6.5 A |
Lifespan |
50,000 hours |
Photometrics |
|
Filter |
No filterWith filter |
Beam Angle |
50°90° |
Field Angle |
114°151° |
Illuminance @ 2 m |
1,014 lux439 lux |
Thermal |
|
Maximum External Temp. |
104 °F (40 °C) |
Cooling |
Convection |
Ordering |
|
Product Name |
Cast Panel Pack |
Item Code |
07031831 |
UPC Number |
|
Contact Us
General Information
Chauvet World Headquarters
Address: 5200 NW 108th Ave Sunrise, FL 33351Voice: (954) 577-4455Fax: (954) 929-5560Toll Free: (800) 762-1084
Technical Support
Voice: (844) 393-7575Fax: (954) 756-8015Email: [email protected]Website: www.chauvetdj.com
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record. Follow the instructions to request support or to return a product. Visit our website for contact details.
[xyz-ips snippet=”download-snippet”]