BT960 (+ ) : 26 X 10CM
BT960
TRUE WIRELESSEARBUDS
WIRE-FREE EARBUDS
- Using your True Wireless EarphonesBefore use: Charge both earbuds by placing it inside the charging case.STEP 1Turn off the Bluetooth function from your music device. Eg. Mobile phone or music device.STEP 2Take out the earbuds from the charging case after they have charged. The earphones will be automatically on and paring. When pairing successfully, the left earphone will flash blue and the right earphone will flash red and blue alternately.STEP 3When auto-pairing failed, or dual earphones disconnected. Press the power button on the left and right earphones, to make the earbuds off and on again, the left and right earphones will be connected manually.* If pairing still does not work, please long press both the buttons on the earbuds for 10 seconds to force the earbuds to restart. They should then resume to pairing mode.STEP 4You can now turn on the Bluetooth function of your mobile phone. Search and select BT960, click it to connect.If there is an interruption on the earbud, it may be due to some interference. If the interruption continues, please turn off the Bluetooth function from the music device or phone, and then turn off both earbuds by pressing the button on the earbud for 5 seconds, and press both the button again for 3 seconds to turn on again. Once the earbuds have restarted, please turn on the Bluetooth on the music device or phone.
- Button FunctionOn/Off ButtonsPairing dual earphones: Long press the left and right earphone button for 3 seconds, turn on or off the earphones.Pairing single earphone: Long press left or right earphone button for 3 seconds to turn on the earphones, enter single earphone pairing. Then long press for 3 seconds,turn off the earphones.( When power is on, the earphone will flash blue. When power is off, the light is off. )Answer / Hang UpWhen coming call, click the button on the left or right earphone to answer the phone.During the call, click the button on the left or right earphones to hang up the call.Reject / Call BackWhen coming call, long press left or right earphones to refuse the call.Three-click the right earphone button to resume back to the last call, three-click the left earphone button to open the voice assistant.Play / Pause MusicWhile playing music, click the button of the left or right earphone to play or pause the music.If one of the earbuds has run out of battery, the other one will continue to work until it runs out of power also.Last / Next Song ControlWhen playing, double-click the left earphone button to switch to the Last song; double-click the right earphone button to switch to the next song.
- Charging FunctionCharge the Charging BoxThere is a USB charging cable in the package, you can connect the power adapter for charging.The blue LED lights will keep flashing when it is charging.If all 4 blue LED lights on the front turn on, that means the charging case is fully charged.Charge for EarphonesPlease double-check and confirm the charging compartment has sufficient power,then put the earphones into the correct position for charging.If the earbuds are not placed securely into the case, it may not charge. Pleasetake out the earbuds and re-insert them in the case. Also make sure the lid isproperly closed so that charging the earbuds can start. Some large earpads couldalso obstruct the closure of the case, and so may need to be removed. A red lightwill appear to confirm that charging has started.
-
Frequently asked questionsWhy do Bluetooth earbuds can not turn on?1) You can check if earbuds are with power or not? if not, please fully charge it before turning it on.2) Please long-press the power on /off button. (the detailed operation, please refer to the manual.)Why Bluetooth earbuds signal is unstable？1) Restart the Bluetooth earbuds.2) Please kindly check the compatibility and calling communication quality of the mobile phone.3) Please confirm if the distance between earbuds and phone is too far or there are interference surrounded. If too far or there is interference, the signal will be unstable.4) Please don’t stay in the signal reflective environment.Why the Bluetooth earbuds can’t hear voices？1) Please kindly check if the Bluetooth earbuds is on mute status.2) Please kindly check if Bluetooth earbuds and phone are connected well.3) then confirm if the distance between earbuds and phone is too far or there is interference surrounded.If after some time, the earbuds are not pairing correctly, please delete the earbuds from your phone by going to the phone’s Bluetooth settings. Then reset the earbudsby long-pressing both buttons on the earbuds for 10 seconds. Then follow Steps 1-4 on the first page of this manual to repair your earbuds to your phone device.If after some time, the earbuds stop charging, pls try to use the cotton swab to clean the earbud bottom and the inductive pins to avoid any dust and sweat.
Specifications:
- Model: BT960
- Bluetooth Version: 5.0
- Power Input: DC 5V
- Earphone Working Time: About 4 hours at 50% volume
- Earphone battery capacity: 40mAh + 40mAh = 80mAh
- Charging Case battery capacity: 200mAh
- Support Protocol: HSP/HFP/A2DP/AVRCP
Limited 90-Day Warranty:
Sentry warrants this product to be free from defects in materials and workmanship for 90 days from the date of original purchase. This warranty does not pertain to damage resulting from accidents, abnormal use, misuse, or neglect. Any defective product will be replaced if returned to an authorized Sentry dealer or to Sentry directly at: PO Box 885, One Bridge Street, Hillburn, NY 10931. Please enclose a $5 check for return shipping.
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sentry Industries Inc is under license. Other trademarks and trade names are those of their respective owners.
Sentry Industries inc declares that radio equipment BT960 is in compliance with Directive 2014/53/EU. The EU declaration of conformity is available at https://sentryindustries.com/european-declaration-of-conformity/
Conformity with DirectivesThis product is CE marked to denote conformity with Directives 73/23/EEC (low voltage) and 89/336/EEC (Electromagnetic Compatibility) , as amended.
Environmental ProtectionWaste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
Supplier’s Declaration of Conformity 47 CFR 47 CFR Part 15.21, 15.105(b) Compliance InformationSentry BluetoothResponsible Party –SENTRY INDUSTRIES INCONE BRIDGE STREET, HILLBURN, NY 10931, USATEL +1 8457532910
FCC Compliance Statement
“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”FCC ID:2ACP4CBT960 Model #BT960
“NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Warning:
report this adChanges or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.”
References
[xyz-ips snippet=”download-snippet”]