EASY WELD™
CAT# 261QUICK START GUIDE140 FC-i FLUX-CORED WELDER(DESIGNED FOR MILD STEEL WELDING ONLY)
Read the user manual- Install wire spool0.030″ (0.8mm) diameter
8″ (200mm) wire spool 4″ (100mm) wire spool - Set drive rollFace the side marked 0.030″ away from the machine
- Feed wire and set pressureFor proper tension align the tops of the screw and nut together
- Connect to Input Power• Generator OK with continuous output > 4,000 W• Extension cord: #12 AWG or larger; 25′ (8m) or shorter
- Remove consumables and depress trigger until wire comes out. Replace consumables.
- Adjust wire feed speed ( ) and voltage ( )See chart on welder for correct settings
- With contact tip 1/4″ from metal, depress trigger completely to initiate the arc
Read the user manual
Connect to Input Power
• Generator OK with continuous output > 4,000 W• Extension cord: #12 AWG or larger; 25′ (8m) or shorter
)See chart on welder for correct settings
FIND FLUX-CORED WELDING TIPS AT WWW.ASKFORNEY.COM
QUESTIONS OR TROUBLE? Contact Forney Industries at 1-800-521-6038[email protected] askforney.comforneyind.com
References
[xyz-ips snippet=”download-snippet”]