User Manual
Tzumi AquaBoost Floating Waterproof Speaker
PRODUCT OVERVIEW
- Volume +/Next Song
- Power
- Volume -/Previous Song
- Play/Pause/Answer/Refuse Call
- Micro USB port
- Aux
- LED Indicator
- Microphone
CHARGING YOUR SPEAKER
The battery must be fully charged prior to use. It takes approximately 3 hours to fully charge your speaker (from depleted unit).
Red light ON – unit chargingLED OFF – unit fully charged
- Via AC Adapter/Wall Charger: Using the provided Micro USB cable, connect your speaker to (Micro USB port) a power source such as an AC USB adapter.
- Via Computer: Using the provided Micro USB cable, connect your speaker (Micro USB port) to the computer/laptop (USB port).
PAIRING THE SPEAKER TO BLUETOOTH DEVICE
Make sure the Bluetooth function is available and enabled on your smartphone. Specific pairing procedures will be different depending on different device models. For detailed information, please refer to your smartphone’s User Guide.
- If no device connection is made within 10 minutes of the speakerbeing switched on, the speaker will automatically be switched offto save power.
- After a successful pairing, devices will memorize each other.Therefore, no pairing will be needed next time.
- Keep the distance between your device and the speaker within 3 feet (for pairing only).
- Turn on the speaker by pressing and holding the Power Button
for 3 seconds. - The tone prompt will sound and the LED light will flash blue. The unit will automatically enter into pairing mode.
- Activate the Bluetooth function of the device to search for all nearby available Bluetooth devices. After finishing the search, select “Tzumi-AquaBoost” in the device list displayed.
- Your AquaBoost Speaker is ready for use.
SPEAKER CONTROLS
ON/OFFPress and hold 
button for 3 seconds to turn the unit ON.Press and hold the button again to turn it OFF.
The unit will turn itself off if inactive for 10 minutes.
VOLUME During a call or when listening to music
- Volume +Press and hold Button.
- Volume –Press and hold Button.
MUSICNOTE: The Music Function Control only works with Bluetooth devices that support the A2DP profile.
Go to next songPress + Button
Go to previous songPress – Button
PLAY/PAUSE/ANSWER/REFUSE THE CALL
- Press button to answer the call, press it again to hang up.
- Press and hold button for 2 seconds to refuse the call.
- Double press button to call back the last number.
- To hang up the call press it again.
TO RESET UNITPress and hold the and 
at the same time around 6 seconds to reset the speaker to its original setting.
AUX MODE
Use the 3.5mm audio cable (included) to connect the speaker to an audio source (MP3/MP4, mobile phone, computer). A tone will sound. The speaker will play the music from the audio source.
IMPORTANT SAFEGUARDS
- Keep speaker away from any source of heat.
- Always adjust the speaker volume to a suitable level to avoid hearing damage or the damage to the unit.
- If not using the speaker for a long period of time, keep the internal battery charged (charge once every 3 months). This will extend the life of your lithium battery.
SPECIFICATIONS
- Frequency: 120 ~ 20KHz
- Battery: 2000mAh/3.7V
- Bluetooth version: V4.2
- Distance: 33 ft (10m)
- Charging time: up to 3 hours
- Playing time: up to 8 hours
- Speaker unit Diameter: D45mm
tzumi® AquaBoost Waterproof Outdoor Speaker Distributed by tzumi® Inc. NY, NY 10016©Copyright 2017 tzumi All Rights Reserved. Made In China.
©Copyright 2017 iPhone is a trademark of Apple Inc. Registered in the US and other countries. Bluetooth SIG, Inc. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by tzumi® is under license.
Other trademarks and trade names are thoseof their respective owners.Subject to change without prior notice.
Tzumi AquaBoost Floating Waterproof Speaker User Manual – Tzumi AquaBoost Floating Waterproof Speaker User Manual –
Questions about your Manual? Post in the comments!
[xyz-ips snippet=”download-snippet”]