Waterpik Water flosser WP-861C Instruction Manual

Water flosserModel WP-860/861/862/871/872/881/882This device is only compatible with voltages of 120 VAC, 60Hz

QUICKSTART GUIDE

Review full instruction book prior to first use

FIRST USE

Fill the reservoir with warm water and replace it firmly on the base.

Insert tip firmly until it clicks into place.

Turn pressure to high, point tip into the sink, turn power, and water switches on until water flows. Then turn off.

START WATER FLOSSING

TO AVOID MESS: PLACE THE TIP IN YOUR MOUTH BEFORE TURNING THE UNIT ON

Turn power and water on.Start on low pressure and increase to your liking.

LEAN OVER SINK

Close lips enough to prevent splashing, while still allowing water to flow from the mouth into the sink.

TECHNIQUE

Aim water at the gumline at a 90° angle. Follow the gumline and pause briefly between teeth.

HOW-TO VIDEO

Visit waterpik.com/vid860 Register your product and receive over $50 in savings.waterpik.com/registration

© 2017 Water Pik, Inc.1.800.525.2774 (USA)

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by