24×8 cable modem plusAC1900 routerModel MG7700
Quick Start Guide
Packaged with your MG7700 modem/router
https://motorolacable.com/documents/MG7700-InicioRapido.pdf
Let’s get started If you don’t have cable Internet service, please order that from your cable service provider.Now connect your MG7700 as shown on the next panel. Connecting to a Coax CablePlease see the connection photo on the next panel. You connect your MG7700 to a “live” coax cable. Sometimes a cable will already be available. Sometimes there’s a coax wall jack available, and you connect to the jack with a coax cable. Your MG7700 can also share a coax cable attached to a TV by using a coax splitter. Please note that a badly chosen splitter reduces a cable modem’s speed; so if you need to use a splitter, use a 2-way splitter whose top frequency is 1,000 MHz or higher.
ON/OFF buttonPOWERConnect the supplied power cube between the power jack and an electrical outlet.ETHERNET (LAN 1-4)You can connect a computer, HDTV, game station, or another Ethernet-capable device to any of these 4 LAN ports.RESET WPS buttonCOAX Connect a “live” coax cable to the modem’s COAX connector as discussed above. (Tighten the nut so it’s finger tight. You may want to use the supplied wrench. Make the connection snug but not over-tight.)
Prepare to activate By now you should have:
- Subscribed to cable Internet service.
- Connected your MG7700.
- Powered up your cable modem/router. To do this, the On/Off button needs to be On (Push the button in until it clicks). Wait for the green online connection light
to stop flashing and remain solidly lit. This may take up to 15 minutes.
to stop flashing and remain solidly lit. This may take up to 15 minutes.You should have a recent cable bill handy because it has your account number and you’ll probably need that.If you’re asked for information about the MG7700, you can find this on the label on the bottom of the modem/router.
ActivateFor some service providers, you activate by calling them. Many service providers including Comcast and Cox prefer that you activate by opening the Web browser of a computer that’s plugged into one of the MG7700’s Ethernet ports. Once you’ve opened the browser, try to go to www.motorola.com . This should bring you to the service provider’s activation page.If you don’t have a computer, you can use the Web browser of a WiFi device such as a smartphone or tablet for activation. In that case, you’ll need the unique Wireless Network Name and Password printed on the bottom of your MG7700. You’ll use these in setting up your wireless device to connect to the MG7700. Once you’ve connected, you can open the browser of that wireless device.
For Comcast XFINITY Users Only: If the activation page does not appear, please go to xfinity.com/activate for more information and to activate your modem.
Here is a list of phone numbers for some major cable service providers. (Note that this list is subject to change.)
| Comcast | 1 (800) XFINITY |
| Cox | 1 (877) 206-4210 |
| Bright House (Spectrum) | 1 (855) 222-0102 |
| Cable One | 1 (855) 692-4113 |
| Charter Spectrum | 1 (855) 757-7328 |
| MediaCom | 1 (844) 987-3260 |
| RCN | 1 (800) 746-4726 |
| 5uddenlink | 1 (877) 794-2724 |
| Time Warner (Spectrum) | 1 (855) 707-7328 |
| WOW! | 1(800) 343-2076 |
Once your MG7700 is activated either online or by phone, your service provider will provision your MG7700 service. Typically this takes less than 5 minutes, but in some cases, this may take 30 minutes or longer to complete.
Once you have activated, try to browse the Web using a device connected via Ethernet or WiFi to the MG7700. (See the section Wireless Router, below for information on connecting via WiFi). If browsing works, Congratulations! Your MG7700 is working.If your MG7700 is NOT working, see Troubleshooting Tips below.
Configuration Manager
You may not need to use the MG7700’s ConfigurationManager. Here are some reasons for using it:
- You want to change the wireless network name and password., For instance, maybe you want a more easily remembered name, or you’re replacing a router and want to use your existing WiFi Network Name (SSID) and/or WiFi Password/Key instead of the unique ones that come with the MG7700.
- You want to set up special Internet gaming settings.
- You want to get performance information about the MG7700 modem and/or built-in router. This can be helpful in diagnosing DOCSIS performance issues and/or optimizing wireless performance
If you need to access the MG7700 Configuration Manager, open your Web browser. Type http://192.168.0.1 in the address bar and press the Enter key.In the login dialog box, type the following User Name andPassword in lower case, then click OK.User Name: adminPassword: MotorolaThe Basic Status and Settings page will appear. If this page doesn’t appear, please see the Troubleshooting Tips below. You can get more detailed information about the MG7700 and its Configuration Manager, please see www.motorolanetwork.com/MG7700manual
Wireless Router
As noted before, the MG7700 has a unique Wireless Network Name/SSID and Wireless Security Key/Password printed on the MG7700’s bottom label. Set up your wireless devices to work with this SSID and security key, or the SSID and security key you specified, if you changed them.Note that wireless performance depends on a number of factors. Please keep these things in mind:
- Where possible, put the MG7700 in a central place so that it’s not too far away from your other wireless devices.
- Try to avoid interference from other wireless devices such asBluetooth headsets and stereos, microwave ovens, WiFi capable printers, and 2.4 GHz cordless phones and base stations. Don’t put the MG7700 close to these interfering devices. Sometimes it helps to change the MG7700 wireless channel frequency to reduce interference with neighbors’ wireless networks. This is discussed in the Troubleshooting section of this QuickStart.
- Wireless range can be limited by a variety of issues, including weak wireless clients and challenging building configurations. Some devices that connect to the MG7700 do not have as powerful a wireless signal, and often those devices can slow down your network’s WiFi. If you need a greater wireless range far away from your MG7700, you could add a Range Extender. For more information, please see www.motorolanetwork.com/extendersIf you have a coaxial cable running near your router and a distant wireless access point, HDTV, or another device, MoCA is often a good way to connect the router to the device. MoCA can share the same cable used for cable TV or cable Internet. With the Motorola MM1O00 MOCA Adapter, speeds are up to 1,000 Mbps. Please see www.motorolanetwork.com/MocaWifi
Front Panel Lights
During Power up, the lights will blink for about a minute.
|
LIGHT |
COLOR |
DESCRIPTION |
|
|
Green | ON: MG7700 power onOFF: MG7700 power off |
|
|
Green or Blue | Green Scanning for DS channel Blinking:Green ON: Connected on 1Downstream channelBlue Negotiating bondedBlinking: channel(s)’Blue ON: Bonded with 2 or more channels |
|
|
Green or Blue | Green Ranging in progress Blinking:Green ON: Connected on 1 channelBlue Negotiating bondedBlinking: channel(s)’Blue ON: Bonded with 2 or more channelsOFF: Upstream not connected |
|
|
Green | Blinking: Trying to go onlineON: OnlineOFF: Offline |
|
|
Green | Blinking: Data is flowing
ON: WiFi is enabled OFF: WiFi is not enabled |
|
|
Green | Blinking: Data is flowingON: WiFi is enabledOFF: WiFi is not enabled |
|
|
Green | Blinking: WPS is in discovery modeON: Light will remain solid after WPS configuration is successful |
Power
UpstreamIf a blue light blinks continuously, this indicates partial service (at least one designated channel has not completed bonding). You should still get high Internet speeds, but your service provider may want to know so they can adjust their network.
Troubleshooting Tips
What if I can’t make an Internet connection right after installation?
- First turn your MG7700 off for at least 8 seconds, then on, to see if that fixes the problem.
- Check the connections you’ve made to yOur MG7700. Power and coax connections are required, and up to 4 Ethernet connections are optional. Are those connections good? Be sure that the coax cable connection is tight enough, possibly using the coax wrench.
- Check that the MG7700’s power cube is plugged into a live outlet and that the Ethernet cable is connected securely.
- Make sure that your coax cable is live. You can check that by using it with a TV.
- Check that you provided the correct setup information to your cable service provider.
- Contact your cable service provider to make sure they’ve turned on your Internet service.
What if my MG7700 has been working, then stops working?
- First turn your MG 7700 off for at least 8 seconds, then on, to see if that fixes the problem.
- If the MG7700’s lights don’t come on, check that the modem is getting power from its power cube and that the MG7700’s power button is on.
- Check your MG7700 cables.
- Check with your service provider. Sometimes there’s a service outage or some other service issue. Sometimes a service outage also affects your TV service, so check that.
What if I’m getting Internet service but my speed is disappointing?
- Be sure you know what speed you’re paying for.
- Check the speed with a computer plugged into one of the modem’s Ethernet ports. Use one of the tools found when you search the phrase: broadband speed test. Make sure your computer’s LAN port supports gigabit rates (l000BT or GE). You will need this to achieve service speeds of 100 Mbps or greater.
- If you get good speed when a computer’s plugged into the modem, you may have a wireless problem. In that case, please re-read the wireless router section.Some video streaming services get bottlenecked, especially at busy times like after dinner. See whether you have the speed problem at less busy times.
- Try connecting your MG7700 nearer to where the coaxial cable comes into your home. This lets you see whether your home’s cabling is a problem.
- If you’re using a splitter with your MG7700, try the MG7700 without the splitter to see if that helps. If it does, you may need to get a better splitter, one with a top frequency of at least 1,000 MHz. What if I’m told that my MG7700 isn’t approved by my cable service provider? That’s probably not true. Leading cable service providers have a list of certified cable modems for each of their Internet speeds. You can check the list of your service provider. You can also find information about certifications at www.motorolanetwork.com/services What if I am connected wirelessly but my connection seems slow or keeps dropping? Please re-read the Wireless Router section above.
What if I don’t know my MG7700’s Wireless Network Name/SSID or Security Key/Password?
The default values are printed on the bottom label of the MG7700. Use these unless you change them. If you changed them, try to remember where you put the new values. If you have a device that connects wirelessly to the MG7700, it may show the Wireless Network Name/SSID and Password. You can also find this information in the MG7700 Configuration Manager. Information about using this is in the Configuration Manager section above. If all else fails, reset the device to factory defaults by holding the Reset button for 10 seconds. (A paperclip helps.) You can then use the default values. What if I think that wireless devices are interfering with my MG7700 wireless router?
- Where possible, put the MG7700 as far away as possible from interfering devices such as Bluetooth transmitters and neighbors’ WiFi routers.
- To try to pick a less used wireless channel for your MG7700, first, go into your MG7700’s Configuration Manager.
- Click the Advanced button at the top of the page, then click the Wireless and Scan/Bridge menu items at the top of the page.
- Click the ScanWirelessAPs button. A list will appear of competing wireless networks, including the channels they are using. Write down one or more of the less used channel numbers, since a less used channel should be better for your MG7700.
- On the top of the page, click the Wireless Basic menu item.
- On the Basic page, select the channel you want in the Channel pulldown, then click Save.
Do you have any other questions? We have lots more information at www.motorolanetwork.com/mentor
We like to help.
Please visit our Support Website or call our support specialists. Our Website has our Motorola Mentor information, and also provides returns and warranty information. www.motorolanetwork.com/supportEmail: [email protected]Phone: 800-753-0797 or 617-753-0562 Our full-length user manual is available at www.motorolanetwork.com/MG7700manual
Limited Warranty
MTRLC LLC warrants this product against defects in material and workmanship for a warranty period of 2 years. To read the full warranty, please go to www.motorolacable.com/warranty
Safety Precautions
- These precautions help protect you and your MG7700. Do not put the MG7700 or its power cube in water, since this is a shock hazard
- The MG7700 should normally be installed indoors.
- If you use it outdoors, protect it from moisture and be careful about temperature.
- Your MG7700 should be operated in an environment that’s between 32 and 104° Fahrenheit (0 to 40° Centigrade).
- Your MG770O should not be in a confined space. There should be room for airflow around the top, front, and sides of the MG7700.
- Make sure to use your MG770O’s power cube and a compatible electrical outlet.
- The coaxial cable’s ground shield is intended to be connected to the building’sEarth ground. Attachment to Earth ground is typically provided through your cable service provider’s installation
FCC StatementThis device complies with Class B Part 15 of the FCC Rules. Operation is subject to the following two conditions. (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operationNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation, This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation, If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, and/or consult the dealer or an experienced radio/TV technician for helpFCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter For operation within the 5.15 – 5.25GHz frequency range, it is restricted to indoor operation. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.
FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated within a minimum distance of 42cm between the radiator and your body.
DC input connector is center-pin positive polarity.WEEE is a directive in the EU that designates safe and responsible collection, recycling, and recovery procedures for electronic wasteMTRLC LLC PO Box 12147 Boston, MA 02112-1147CMTRLC LLC 2018. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. All rights reserved.
report this ad27783-EL-B/sse
References
[xyz-ips snippet=”download-snippet”]