xiaomi XMYX02YM Bluetooth Mini Speaker User Guide

Mi Bluetooth Speaker mini

XMYX02YM

Product Overview

1. Aluminum Mesh
2. Mic
3. Lanyard Attachment
4. Power Button
5. LED Indicator
6. Micro USB Charging Port

Paring Operation

1. Pairing for The First Time:Press and hold the power button for 3 seconds. The speaker turns on, and automatically enters searching mode with a notification sound and the indicator blinking red & blue. Look for Mi Bluetooth Speaker mini on your mobile device to pair up.
2. Automatic Pairing:The speaker will automatically pair with the last paired device, and confirm that pairing has succeeded with a notification sound. If automatic pairing fails, the device will re-enter stand-by mode.
3. Re-pairing:Double press the power button to enter paring mode again.
4. Answering Calls:When the speaker is connected to your mobile phone, press the power button to answer calls, and press again to end.
5. Low Battery and Charging:When the battery level is low, the device will send a notification sound with the red light blinking. If not charged in time, the device will turn off automatically.

Other Functions

1. The system will automatically turn off if it fails to pair with any device within 5 minutes.
2. Battery level indicator: only applicable to devices with MIUI and iOS systems. The battery level will be shown on the status bar.

WARNING: This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.

Specifications

BluetoothBluetooth Version: V4.0Frequency: 2.4GHzWireless Range: approx. 5mSupported Profiles: A 2DP V1.2, AVRCP

AudioRated Power: 2WSNR: 53dBImpedance: 4ΩDistortion: THD≤5%

PortMicro USB

Power SupplyBattery Type: Built-in 480mAh lithium batteryPower Input: 5V300mACharging Time: 2hPlay Time: 4h

LED Indicator StatusParing: The indicator blinks red and blue quickly.Low Battery: The indicator blinks red every 5 minutes, along with low battery notification alert.Model No.: XMYX02YM

Warning: Battery, battery pack or assembled battery must not be exposed to sunlight, fire or other overheated environments.

Button Functions

FCC Statement

report this ad

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.— Consult the dealer or an experienced radio/TV technician for helpThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.