Klipxtreme KMA-610 Car Wireless Fast Front View Charging Mount User Guide

Ridesmart

KMA-610

I. Introduction

Thank you for purchasing the KMA-610 car wireless fast charging mount from Klip Xtreme with Qi Inductive Charging Technology.

To enjoy all the features and benefits of this unit, please read the instructions included in this quick user guide. If you want to know more about other Klip Xtreme quality products, please visit our website www.klipxtreme.com.

II. Package contents

• Qi car wireless fast charging mount
• USB Type-C cable
• User guide

Product overview

Front view

1. Adjustable side arms
2. Telescopic knob
3. Telescopic support pole
4. Pivot knob
5. Lever
6. Suction cup
7. Indicator light (both sides)
8. Adjustable foot
9. Silicone mat

Side view

1. Adjustable side arms
2. Touch button (both sides)
3. Type-C charging port
4. Charging head angle with pivot knob
5. Vent clip

III. How to use your wireless charging mount

1. First, connect the USB end of the Type-C supplied cable into the device and the other end on the available USB power source. To enable fast wireless charging, it will require a QC2.0/QC3.0 USB power source.
2. The LED indicator light will alternatively flash green and then blue. It will remain solid green as soon as the device is connected.
3. Touch the button located on the right or left side of the platform to open both adjustable arms and place the phone on the charger.The arms will lock automatically once the phone is placed on the charger and it will start charging immediately. The LED indicator will change to blue once it starts charging.
4. If the phone is not charging, adjust the foot up or down until it starts wirelessly charging.
5. When the device is in Standby mode, the LED indicator lights up in green.
6. Press the button again to unlock the arms and take the phone out.

Note: The LED indicator light will start flashing and the device will stop charging if the current amount is too large or if there is a foreign object in the platform. Do not wireless charge the phone if a similar situation happens.

Technical specifications

*For activating wireless fast charging speeds a 1.8A QC 2.0/3.0 USB car fast charging adapter is required. (Not included).Wireless charging time depends on mobile phone brand.

Precautions

• Do NOT expose the wireless charging mount to excessive heat or to direct sunlight for long periods of time.
• Do NOT expose the device to rain or water, and avoid environments with high humidity or dust.
• Do NOT disassemble, repair or modify the unit yourself.
• Do not make sudden movements when placing or releasing the phone from the wireless charging mount
• Do NOT use cleaning products that contain benzene, solvents or alcohol.
• Do not place the magnetic strip or chip card (like an ID card, bank card, etc.) on the charging pad so it doesn’t lose magnetic power.

Recommendation

To ensure a firm bond, surfaces should be totally free of dirt before attaching the suction cup.

NOTES

KlipXtreme® is a registered trademark. All rights reserved. Other trademarks and trade names are those of their respective owners. Any mention of such is only intended for identification purposes, and therefore shall not be construed as a claim to any or all rights pertaining to those brands. Made in China

report this ad

www.klipxtreme.com

References

• 
  Home – Klip Xtreme