Thank you for buying your new Remington® product. Please read these instructions carefully and keep them safe. Remove all packaging before use.WARNING:This appliance is hot. Keep out of reach of children at all times.
IMPORTANT SAFEGUARDS
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been supervised/instructed and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children unless hey are older than 8 and supervised. Keep the appliance and cable out of reach of children under 8 years. Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.
For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom*.* Currently, the fitting in a bathroom of an electrical socket suitable or capable of operating the appliance is not permitted in the UK (see BS7671).
Burn hazard. Keep the appliance out of reach from young children, particularly during use and while cooling down.
Never leave the appliance unattended when it is connected to the power supply.
Always place the appliance with its stand, if any, on a heat-resistant, stable flat surface.
If the supply cord of this unit becomes damaged, discontinue use immediately and return the appliance to your nearest authorized Remington® service dealer for repair or replacement in order to avoid a hazard.
Do not allow any part of the appliance to touch the face, neck, or scalp.
Keep the power plug and cord away from heated surfaces.
Do not use attachments other than those we supply.
Do not use the appliance if it is damaged or malfunctions.
Do not twist or kink the cable, or wrap it around the appliance. Check the cord regularly for any signs of damage.
This appliance is not intended for commercial or salon use.
CAUTION: Always remove the appliance from the storage pouch/sleeve before heating and allow it to fully cool before placing it back.
Automatic safety shut off – this unit will switch itself off if no button is pressed or it is left on after 60 minutes.
Multivoltage: for home or abroad. At 120V times and temperatures may vary.
INSTRUCTIONS FOR USE
Before use, ensure the hair is clean, dry, and tangle-free.
For extra protection use a heat protection spray.
Hairsprays contain flammable material – do not use while using this product.
Section the hair prior to styling. Style the lower layers first.1. Plug the product into the main power supply.2. When your straightener is plugged in but not turned on the lock symbol will come on to show that it is in standby mode.3. Press and hold the on/off button to switch on.4. Select the appropriate temperature for your hair type using the “+” and “-” temperature controls on the side of the product. Start styling on lower temperatures first.5. The “+” button will increase the temperature and the “-” button will decrease the temperature.Recommended Temperatures
Temperature
Hair type
150°C – 170°C
Thin/fine, damaged, or bleached hair
190°C – 210°C
Normal, healthy hair
210°C – 230°C
Thick and difficult to style hair
Caution: the hottest temperatures should only be used by experienced stylers.6. The temperature display will flash until the selected temperature is reached.7. Working on one section at a time run the straightener through the entire length of the hair, without stopping.8. After use, press and hold the on/off () button for two seconds to turn off then unplug the appliance.
Intelligent Heat Sensor
Press the ∞ button to activate the Intelligent Heat Sensor.
If the sensor is on during styling, the indicator light will come on to show that the sensor is monitoring the plate temperature and continually regulating the heat output, helping prevent the damage caused by overheating. These temperature changes are not displayed on the product but happen quickly and automatically during styling.
Temperature Lock Function
Set the desired temperature by pressing the +/- buttons and lock the switch settings by pressing the ‘-‘ button for 2 seconds. A ‘’ symbol will appear on the temperature display.
To unlock the switch settings, press and hold the ‘-‘ button again for 2 seconds.
Memory Function
Each time you use the product it will automatically set itself to the last temperature used
Temperature Boost Function
For quick touch-ups of stubborn, hard-to-style sections.
The temperature boost function boosts the temperature to 230°C.
Hold the “+” button for 2 seconds to operate.
Caution: the highest temperature is not suitable for every hair type. If you plan to use this straightener on the boost setting of 230°C please test on a small section of your hair first.
STORAGE, CLEANING, AND MAINTENANCE
Let the appliance cool down before cleaning and storing it away
Wipe all the surfaces with a damp cloth.
Don’t use harsh or abrasive cleaning agents or solvents.
report this ad
The plates can be locked together for easy storage:To lock, close the plates and slide the hinge lock backward (towards the cord) until it stops.To unlock, slide the hinge lock forwards (towards the plates).NOTE: Do not heat the unit in the locked position.
RECYCLING
To avoid environmental and health problems due to hazardous substances, appliances, and rechargeable and non-rechargeable batteries marked with one of these symbols must not be disposed of with unsorted municipal waste. Always dispose of electrical and electronic products and, where applicable, rechargeable and non-rechargeable batteries, at an appropriate official recycling/collection point.