SUPERIOR ELECTRONIC NAO-001 High Gain Antenna Instruction Manual

NAO-001 AMPLIFIEDOUTDOOR ANTENNAHIGH GAIN ANTENNAANTENNA DIGITALE AMPLIFICATA PER ESTERNI

Instruction Manual

 PACKAGE CONTENTS:A 1x HD/Full HD/Ultra HD DVB-T2 AntennaB 1x Antenna power adapter (5 V, 500 mAC 1x Instruction manualD 2x Wall plugsE 2x Self-tapping screwF 1x Double-sided tape

Before using this antenna, please, read the instruction manual carefully.

TECHNICAL DATA:

HD (720p), Full HD (1080i, 1080p),Ultra HD (4K/2160p)Range of frequencies: VHF: 170-230 MHz; UHF:470-694 MHzGain: 25 dB (Max)Cable connector: F-type, maleCable length: 5.0 m + 1.0 m (USB cable of power adapter)Impedance: 75 ΩVoltage (USB adapter): 5 V, 500 mAOperating temperature: -20~85 °COperating humidity: 20~80%Dimensions: (8.9 x 24.8 x 6.0) cm

INSTALLING THE ANTENNA

A OUTDOORS

1. The distance between the two marks must be 48 mm 2. Use a 5 mm-diameter drill bit for the holes
3. Drill holes Wall plugs  Self-tapping screws 4. Wall

B INDOORS

 Clean the surface chosen for the installation of the antenna carefully
 Make sure that the two-sided adhesive tape adheres perfectly to the surface
 Remove the protective film
 Press the antenna on the tape, holding it down for at least 30 seconds

 CONNECTION OPTIONS

With power adapter and receiver/decoder

With power adapter only

Direct

 Advice for best reception:

– The antenna is designed to be installed either indoors or outdoors.– Not all digital signals are high definition. Make sure that the digital receiver supports the definition of the channels you wish to view.– Make sure that the antenna and the power adapter are properly installed.The antenna power adapter has a USB cable that must be connected to an active USB port (5 V, 500 mA).The signal light goes on to show that it is operating properly.– It is recommended that the antenna be installed high up (on a wall, for example), preferably close to a window and away from obstacles such as trees, buildings, etc.– If signal reception is not good enough, try changing the direction of the antenna, scanning the channels once again.(A)– If the image is not clear, try connecting the antenna directly to the receiving device (TV, decoder, etc.), without connecting the USB power adapter.– It is best to scan the channels periodically, to make sure that all the services offered are available.NOTE: The quality of the signal and the number of channels received can depend on a number of factors, such as the distance of the TV from the transmission source, the power of the signal, metal constructions in the vicinity, and other environmental considerations.

SIMPLIFIED EU DECLARATION OF CONFORMITY –

Hereby, Superior Srl declares that the radio equipment type active outdoor antenna “NAO-001” is in compliance with Directive 2014/53/EU, Directive 2011/65/EU, Directive(EU) 2015/863. The full text of the EU declaration of conformity is available at the following internet address:https://www.superior-electronics.com/dl/Certifications/NAO001_CE-DoC.pdf

Made in China

[xyz-ips snippet=”download-snippet”]


Posted

in

by