Kramer RTBUS-4C Round Table Mount 4 Cable Pass User Manual

RTBUS-4C Quick Start Guide

This guide helps you install and use your RTBUS-4C for the first time.

Go to www.kramerav.com/downloads/RTBUS-4C to download the latest user manual and check if firmware upgrades are available.

Step 1: Check what’s in the box

• 1 RTBUS-4C Round Table Mount Cable Pass-Through
• 4 Cable bushings
• 1 Locking screw for locking ring
• 1 Quick start guide

Step 2: Get to know your RTBUS-4C

Step 3: Mount RTBUS-4C

To mount RTBUS-4C:

1. Cut a hole in the table 115mm in diameter.
2. Remove the four inner plate screws and remove the inner plate from the enclosure.
3. Run the cables under the table, through the locking ring, and up through the hole in the table.
4. Insert the cables into the bushings on the slots of the inner plate.
5. Place the inner plate into the enclosure and secure the four screws.
6. Place the enclosure into the hole in the table and secure it with the locking ring.
7. Secure the locking ring with the locking ring screw.

Technical Specifications

Specifications are subject to change without notice at www.kramerav.comThe terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Kramer RTBUS-4C Round Table Mount 4 Cable Pass User Manual – Kramer RTBUS-4C Round Table Mount 4 Cable Pass User Manual –