JBL Everest 300 Manual

Everest 300/700

Quick Start Guide
Overview – Buttons & LEDs
1 Cable connections

2 To turn on Bluetooth to pair

3 To pair Bluetooth with the device

LED behaviors

4. To turn off Bluetooth radio when battery is low. Listen to music using audio cable

Connectors in Everest right earcups

5. To use ShareMe™ 2.0

To use ShareMe™ 2.0ShareMe 2.0 enables sharingyour audio with another set ofBluetooth wireless headphonesof any brand.

Step 1: Pair and connect JBL Everest headphone to a source deviceStep 2: Pause music or disengage the voice call from the source deviceStep 3: Press “ShareMe 2.0” button, the white LED starts blinking. JBL Everest headphone is ready to connect to the other headphone.Step 4: Turn on the Bluetooth pairing function in the other headphone. Keep both headphones near each other. The white LED stops flashing and remains lit after two headphones connect.Step 5: Press the play button in the source device to share audio between two headphones.Step 6: Press “ShareMe 2.0” button to turn off this feature. The white LED is off.

6 To charge battery

7 Adjust Volume

8 Multi-function Button (MFB) to control music

9 Multi-function Button (MFB) to skip track

10 Multi-function Button (MFB) to control calls
11 Multi-function Button (MFB) to manage second incoming call

12 Multi-function Button (MFB) to manage 2 calls at the same time

JBL Everest 700 (AE BT)

Model: V700BTDrive size: 40mmDynamic frequency response range: 10Hz-22kHzDriver sensitivity: 102dB/1kHz1mWMaximum SPL: 117dBRated power input: 30mWMicrophone sensitivity: -42dBV/PaBluetooth® transmitted power: <4dBmBluetooth® transmitted modulation: GFSK π/4, DQPSK, 8-DPSKBluetooth® spec: 4.1Bluetooth® profiles: A2DP V1.3, AVRCP V1.5, HFP V1.6, HSP V1.2Battery type: Polymer Li-ion Battery (3.7V, 850mAh)Charging time: 3 hoursMusic play time: up to 25 hoursTalk time: up to 25 hoursDimension WxHxL(mm): 76.9×176.5×169.5Weight (kg): 0.2736

 

report this ad

JBL Everest 300 Manual – JBL Everest 300 Manual –

[xyz-ips snippet=”download-snippet”]


Posted

in

by

Tags: