artika 3-light LED vanity – Essence 3
INCLUDED
| Item | Description | Quantity |
| Wire connector | × 3 | |
| Junction box screw | × 2 | |
 |
Support screw | × 2 + 2 extra |
 |
Mounting bracket | × 1 |
 |
Canopy | × 1 |
|
Outer glass cylinder | × 3 |
|
Inner glass diffuser | × 3 |
WHAT YOU WILL NEED…
Screwdriver
CAUTIONIf using a dimmer, it must be LED compatible.
|
WARNING: Risk of electrical shock. Turn off breaker at the panel. |
Switch off the main electrical supply from the fuse box/circuit breaker before installing the unit or doing any maintenance.Do not use outdoor.
STEP-BY-STEP INSTALLATION
- Turn off the power at the circuit breaker and the light switch.Ensure the power is off before removing the old light fixture.
- Remove the mounting bracket from the light fixture. Install the mounting bracket to the junction box with the junction box screws (fig. 1)
- Attach the hook to the mounting bracket (fig. 2).
- Connect the white wire (N) from the light fixture to the white supply wire (N) from the junction box using a wire connector. Connect the black wire (L) from the light fixture to the black supply wire (L) from the junction box using a wire connector. Connect the ground wire (G) from the light fixture to the ground supply wire (G) from the junction box using a wire connector (fig. 2).
- Push the wires into the junction box. Mount the light fixture onto the mounting bracket and secure with the support screws. Make sure screw are secured into the canopy (fig. 3).
- Restore electrical power.
STEP-BY-STEP INSTALLATION
- Position and hold the outer glass cylinder on the canopy. Screw the inner glass diffuser to the canopy (fig. 4).Redo this step for the 3 lights. Mount this light fixture onto wall before screwing any glass diffuser.
REPLACEMENT PARTS
| Item | Description | Quantity |
 |
Outer glass cylinder | VAN3NO / DGO |
 |
Inner glass cylinder | VAN3NO / DGI |
WARNING
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device does not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
WARRANTY
Artika For Living Inc. is proud to offer you a three-year (3) limited warranty on manufacturing defects from the date of purchase for residential use only. The warranty is extended to the original owner in USA and Canada and is non-transferable. It does not apply to retailers, commercial applications or establishments. The original sales receipt is required for all warranty claims. The remedy under this limited warranty shall be product or part replacement at Artika’s discretion as provided herein and cannot exceed the original purchase price.
This warranty is valid only on products installed in accordance with the building code and laws effective in the region where the unit is used as well as in accordance with the provided instruction manual. It does not cover products installed incorrectly or subjected to abnormal use. Product(s) or component part(s) may be required to be returned for inspection and verification.
Normal wear and tear, misuse, negligence, vandalism, improper maintenance (surface damage due to chemical interaction or cleaning agents including, but not limited to, scouring pads, use of cleaners containing abrasives, alcohol or other organic solvents) improper handling, accident, abuse, fire, flood, theft, acts of God, neglect, or alteration of the product will not be covered under this limited warranty. It excludes any accessories that accompany the product including but not limited to bulbs or batteries.
The warranty does not cover handling, labor, transportation, or any other cost associated with the installation or replacement of the product. This limited warranty is valid in the country of purchase and by Artika authorized retailers only.
Artika for Living Inc. will not be held responsible for any direct or consequential damages or injuries related to the use of this product arising from improper use or installation of this product.
Please visit www.artika.com to discover more about Artika for Living Inc.
Made in ChinaResidential use onlyIndoor use only
Artika For Living Inc.1756, 50th Avenue Montréal (Lachine), Quebec Canada H8T 2V5
Customer ServiceMonday to Friday 9 a.m. – 5 p.m. EST
report this ad
References
[xyz-ips snippet=”download-snippet”]