CIGAR OASIS Excel 3.0 Electronic cigar User Guide

CIGAR OASIS Excel 3.0 Electronic cigar User Guide

Included in the Box

ASSEMBLY & STARTING YOUR CIGAR OASIS EXCEL 3.0

Remove all contents from the box and remove all plastic wrap.

Water Cartridge Fill Instructions
  1. Fill a bowl with distilled water only and submerge the cartridge in it for 4 minutes or pour water in holes, wait for water to absorb and repeat until it stops absorbing.
  2. After completely filling, let it stand for another minute.
  3. Empty all remaining water out of the cartridge so only damp foam remains. **No water should drip out when the cartridge is held upside down**.
  4. Dry off the cartridge and put the unit together.
Set Up Instructions
  1. Place the cartridge on a table with the Cigar Oasis sticker facing you.
  2. Place the control top with the screen on the left side on top of the cartridge while aligning the notches on both pieces.
  3. Hold the cartridge in place while sliding the control top left (push from the logo side) until it locks into place.
  4. Connect the ribbon cable A to the port on the EXCEL 3.0 unit b. The flat part of the ribbon cable will slide out the side of the humidor or through the hinges at either corner.
  5. Connect the Ribbon Cable B to the Micro USB cable B.
  6. Then connect C to the Adapter C and plug into an outlet.

USING YOUR CIGAR OASIS EXCEL 3.0

  • Once the unit is put together and plugged in, it turns on after a few seconds of powering up and then it will read the current humidity. The unit is factory preset at 70% humidity. As soon as the humidity drops below 70% the fan will come on to add moisture to the humidor.
  • To raise or lower the humidity settings use the UP or DOWN arrows.
  • When the unit needs to be refilled with distilled water, the Low Water and Alert icons will flash on display.
  • When the cartridge is refilled and the unit gets to the set point the icons will shut off.

To Change Temperature Between Fahrenheit and Celsius

  1. Hold the CIRCLE button until the F or C start flashing.
  2. Press the UP arrow to select Celsius or Fahrenheit.
  3. Hold the CIRCLE button down until F or C stop flashing to save the changes.

To Calibrate the Humidity

  1. Hold the CIRCLE and UP arrow until the screen displays U.
  2. Use UP and DOWN arrows to raise or lower humidity +-9%.
  3. Hold the CIRCLE and UP arrow to save the changes

Warranty

For warranty information go to www.cigaroasis.com

Support

79 Heisser CourtFarmingdale, NY 11735516.520.5258www.cigaroasis.com

 

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by