DYNATRAP DT1120 LED High Capacity Insect Trap Owner’s Manual

D T1120 L E DOWNER’S MANUALThank you for purchasingthe DynaTrap® Insect Trap!This product may be covered by one or more U.S. patents or pending patent applications. See www.DynaTrap.com/patents

IMPORTANT: READ CAREFULLY IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONSINSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

WARNING: When using electric appliances, basic precautions should always be followed, including the following:

1. Please read all instructions before using the DynaTrap® Insect Trap and keep it for future reference.
2. Always turn the unit off and disconnect the plug before servicing or cleaning.
3. To reduce the risk of injury from moving parts or electric shock, always turn the unit off and disconnect the plug when not in use and before servicing or cleaning.
4. Always unplug before replacing the lamp. Replace with same type rated UV-LIGHT LED 2.4-Watt bulbs, DynaTrap® model 41020.
5. Do not position the unit near heat, gas, oil, or other flammable materials.
6. Place out of reach from children.
7. To reduce the risk of electrical shock, do not put the appliance in water or other liquid.
8. Never operate this product if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or if it has been dropped into water or other liquid.
9. Connect only to a circuit that is protected by a ground-fault circuit-interrupter (GFCI).
10. Do not insert fingers or any foreign objects into the unit while it is connected to an electrical outlet.
11. Collected insects within the unit may contribute to fire, so clean insects from the unit frequently.
12. Do not clean this product with water spray. Do not place where it can fall into the water, or near flammable materials.
13. Do not touch the fan while in motion.
14. Do not abuse cord—Never carry or hang unit by a cord or yank it to disconnect from receptacle. Keep the cord away from sharp edges.
15. If using outdoors, use only extension cords with a tag stating, “Suitable for Use with Outdoor Appliances.”
16. Use only extension cords that have plugs and receptacles that match the product plug. Replace or repair damaged cords.
17. Only use attachments recommended or sold by the manufacturer.
18. This appliance is provided with double insulation. Use only identical replacement parts. See instructions for Servicing DoubleInsulatedAppliances.

INSTALLATION & OPERATING INSTRUCTIONS

1. Unpack unit. Save carton for off-season storage (if needed).
2. If hanging or mounting the trap place approximately 3–6 feet above the floor/ground level for optimal catch rate and easy access for cleaning.
3. If mounting the trap to a wall, secure the mounting bracket to a wall, fence, or other stationary surface using the mounting hardware (included). Then, mount the trap on the bracket by sliding the mounting channel on the sidewall of the trap over the mounting bracket peg.
4. For best catch results leave the unit on at all times, except when cleaning or servicing.
5. Catch rate activity will be higher at night. For best catch results it is recommended to keep the unit away from competing for light sources.
6. It is recommended to place the unit at least 20 to 40 feet away from where people will be sitting.
7. This unit is all-weather resistant – designed for outdoor use including rainy conditions. Intended for household and commercial, indoor and outdoor use.
8. To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plugin anyway.
9. SERVICING OF DOUBLE-INSULATED APPLIANCES – In a double-insulated appliance, two systems of insulation are provided instead ofgrounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance.  Servicing a double-insulated appliance requires extreme care and knowledge of the system and should be done only by qualified service personnel.  Replacement parts for a double-insulated appliance must be identical to those parts in the appliance. The symbol must be identical to those parts in the appliance. A double-insulated appliance is marked with the words “DOUBLE INSULATION”, “DOUBLE-INSULATED” or the symbol:

USER MAINTENANCE INSTRUCTIONS – CLEANING

Clean the trap at least once a week to prolong the life of the unit, insure fire prevention, and provide for more efficient operation.

1. Be sure to clean the unit once per week.
2. Unplug before cleaning.
3. For weekly cleaning, twist the cage clockwise, and remove the damper by grasping the crossbar near the edge of the damper. Pull up firmly.  Remove any buildup from the inside of the retaining cage and fan with a brush. Replace the damper, snap it firmly into place.
4. For major cleaning, remove the screws securing the fan housing to the light housing. After removing the screws, gently pull the fan housing away from the light housing. Using a soft brush, remove dirt and debris from the light housing. Once the cleaning process has been completed, align the screw holes in the fan housing with the screw holes in the lighting unit and tighten the screws to the base of the lighting unit.
5. When replacing the retaining cage – DO NOT press/push against the screen windows.

REPLACING BULB – Replace With DynaTrap UV-LIGHT LED Bulb #41020 (or equivalent G24-Q2 Type – DC 12V/2.4W UVA Bulb) The UV- LIGHT LED light bulb life expectancy is approximately 20,000 hours (or about 2.25 years).

1. UNPLUG UNIT, and allow the bulb to cool before replacing.
2. Remove screw (A). Twist cover counter-clockwise (B). Tilt cover back to expose bulb (C). Note: Upper and lower sections will remain connected by electrical wire – Do Not Pull or Attempt To Disconnect.
3. Cover the bulb with a cloth to protect your finger and hand. Grasp the bulb (with your hand and fingers protected by the cloth) and gently pull the bulb from the socket.
4. Remove any debris from the lamp socket with a brush before inserting the new bulb.
5. Replace cover onto the grill and twist clockwise to lock, replace the screw, and tighten to secure.

REPLACEMENT PARTS

41020 UV-LIGHT LED Replacement Bulb, G24-Q2 Type – DC 12V/2.4WTo see all replacement and accessory parts available for your DynaTrap, visit www.DynaTrap.com.

HOW THE DYNATRAP® INSECT TRAP WORKS

Flying insects are attracted to the unit by UV light and CO2 that is generated by the photo-catalysis between the UV-LIGHT LED lamp and special  TiO2 coating. The fan then pulls the insects into the screened base, trapping them until they dehydrate and die. The base can be removed, allowing the contents to be periodically emptied into the trash.

TROUBLESHOOTING

LIMITED WARRANTY

DYNAMIC guarantees to the original purchaser that this product is free from defective materials and workmanship. This warranty is limited to remedy any defective part for a period of one year from the date of the original date of purchase. Retain your original receipt as proof of purchase. This warranty does not apply to the light bulb, nor to, in our judgment, misuse or abuse. If this unit has been altered, no warranty is in force. This warranty does not apply if this unit is purchased outside the United States, excluding Canada and Mexico. In no case shall DYNAMIC be liable for any accidental, punitive, consequential, or any other damages of any kind for breach of this or any other warranty, expressed or implied, whatsoever. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

SAVE THESE INSTRUCTIONS

report this ad

Dynamic Solutions Worldwide, LLC69 N. Locust St., Lititz, PA 175431-877-403-8727 (TRAP)[email protected]www.dynatrap.com

FOR HOUSEHOLD AND COMMERCIAL,INDOOR AND OUTDOOR USE120 V~ 60 HZ 7.2 W

This device complies with Performance Standards for Light-Emitting Products, 21 CFR, Part 1040, Chapter 1,Subchapter J, Radiological health.© Dynamic Solutions Worldwide, LLC

References

• 
  Freshdesk | Customer Service Software by Freshworks Inc