AORUS 8US2130MH 15.6″ 15G Gaming Laptop User Manual

AORUS 15G

Using AORUS Notebook for the First Time

  1. Connect the power card to the AC adapter.
  2. Connect the AC adapter to the DC-in jack on the right side of the notebook.
  3. Connect the power cord to the power outlet.

Switching on the Power:After you turn on the notebook for the very first time, do not turn it off until the operating system has been configured. Please note that the volume for the audio will not function until Windows® Setup has completed. IMPORTANT

  • Ensure that your Notebook PC is connected to a grounded power adapter before turning it on for the first time.
  • When using your Notebook PC on power adapter mode, the socket-outlet must be near to the unit and easily accessible.
  • Locate the input/output mark on your Notebook PC and ensure that it matches the input/output rating information on your power adapter. Some Notebook PC models may have multiple rating output currents based on the available SKU.
  • Power adapter information:
    • Input voltage: 100-240Vac
    • Input frequency: 50-60Hz
    • Rating output voltage: 19.5V, 11.8A

Full User ManualFor more user guide and software instruction, please refer to the below link: https://www.gigabyte.com/Support* Product specifications and product appearance may differ from country to country. We recommend that you check with your local dealers for the specifications and appearance of the products available in your country.* Although we endeavor to present the most accurate and comprehensive information at the time of publication, we reserve the right to make changes without prior notice.

AORUS Notebook Tour

1. Display Panel2. Webcam Cover3. Webcam4. Microphone5. Power Button6. Keyboard7. Touchpad8. HDMI Port 9. Mini Display 1.4 Port 10. USB 3.2 Port ( USB type-A )11. Audio Combo Jack12. Ethernet ( LAN ) Port13. USB 3.2 Port ( USB type-A )14. USB 3.2 Port ( USB type-C )15. SD Card reader ( UHS-II )16. Power ( DC ) Input Port17. Speaker

IMPORTANT:

  • Do not remove the built-in lithium battery. For any service needs, please contact your local GIGABYTE Authorized Service Center.
  • Do not install the Notebook PC on a slant or a place prone to vibrations, or avoid using the Notebook PC in that location for a long time. This increases the risk that a malfunction or damage to the product will occur.
  • Do not store and use Notebook PC in direct sunlight or the location where temperatures exceed 112°F (45°C) such as inside a vehicle. There is a danger of Lithium-ion battery expansion and aging.
  • Do not use the Notebook PC in a badly ventilated location such as on bedding, on a pillow or cushion, etc, and do not use it in a location such as room with floor heating as it may cause the computer to overheat. Take care that the Notebook PC vents (on the side or the bottom) are not blocked especially in these environments. If the vents are blocked, it may be dangerous and cause the Notebook PC to overheat.

Hotkeys

The computer employs hotkeys or key combinations to access most of the computer s controls like screen brightness and volume output. To activate hotkeys, press and hold the <Fn> key before pressing the other key in the hotkey combination.

Hotkey

 Function

Description
Fn+ESC Maximize Fan Speed To increase the fan speed to 100%.
Fn+F1 Sleep Put the computer in Sleep mode.
Fn+F2 Wireless LAN Enables / disable the Wireless LAN function.
Fn+F3 Brightness Down Decrease the screen brightness.
Fn+F4 Brightness Up Increase the screen brightness.
Fn+F5 Display Toggle Switche display output between the display screen, external monitor (if connected) and both.
Fn+F6 Screen Display Toggle Turn the screen display on and off.
Fn+F7 Speaker Toggle Turn the speaker on and off.
Fn+F8 Volume Down Decrease the sound volume.
Fn+F9 Volume Up Increase the sound volume.
Fn+F10 Touchpad Toggle Turn the internal touchpad on and off.
Fn+F11 Airplane Mode Enable/disable the Airplane Mode function.
Fn+Space Keyboard Backlight Toggle Turn the keyboard backlight on and off.

Recovery Guide

System recovery ( Restore your laptop operating system )When something is going wrong with the laptop operating system, the storage of the laptop has a hidden partition containing a full back up image of the operating system that can be used to restore the system to factory default settings.

Note

  • If the storage has been switched or the partition deleted, the recovery option will no longer be available and a recovery service will be needed.
  • The recovery function is only available on devices with O/S preinstalled. Devices with DOS do not have the recovery function.

Launch system recoveryThe system recovery feature is preinstalled before the laptop is shipped from the factory. The option menu allows you to launch the Windows recovery tool to reinstall the operating system to factory default.The brief introduction below will show you how to start the recovery tool and restore your system.

report this ad

All ready to goMake sure your PC is plugged in. This will take a few minutes.

Windows 10 Recovery Guide

  1. Turn off and restart the laptop.
  2. During the laptop turn on process, press and hold F9 key to launch the tool.
  3. Choose” Troubleshoot” to enter the recovery settings.(Also you can choose “Continue” to exit recover system and continue to Windows for files or data backup.) There are two options for system recovery• Reset this PC-You can choose to keep or remove your files and then reinstalls Windows without losing your files.• AORUS Smart Recovery-Your PC settings will be restored to factored default settings.Caution: All personal data and files will be lost.
  4.  AORUS Smart RecoveryThe recovery will be activated and you will see the option buttons on the window.Click on “Yes” to start it. Caution• Once the “Recovery” is selected, your personal data and files will be deleted after the laptop starts restoring, and the operating system will be reset to factory default settings.• Aprogress indicator bar will show on the window when the recovery process is running. Please make sure the AC-adapter is plugged in and do not turn off the laptop.After the system recovery is completed, you will see the option on the window, please click on “Shutdown”.
  5.  Advanced options
    System RestoreUse a restore point recorded on your PC to restore Windows.
    System Image RecoveryRecover Windows using a specific system image file.
    Startup RepairFix problems that keep Windows from loading.
    Command PromptUse the Command Prompt for advanced trobleshooting.
    UEFI Firmware SettingsChange settings in your PC’ s UEFI firmware.
    Startup SettingsChange Windows Startup behavior.

Appendix

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,