Kraus Single Lever Kitchen Bar Faucet
Congratulations on the purchase of your new Kraus plumbing fixture!Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product:
STOP DO NOT RETURN TO STORE
Please contact our Customer Service Team 1-800-775-0703 / [email protected]
Have the model number available and retain a copy of your receipt with purchase date for reference.
If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.
Prior to Installation
- Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement.
- Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone.
- Flush angle stops to release any debris prior to installation. · Pre-drilled hole size requirement: 1 3/8″ (min) – 1 1/2″ (max) · Max countertop thickness: 1 1/2″
For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help:Toll-Free: 800 775-0703 or [email protected]
Tools you will need
| Adjustable Wrench |
Silicone Sealant (optional) |
Bucket |
Safety Goggles |
Diagram and Parts List
A. AeratorB. Faucet BodyC. BaseD. Hot & Cold WaterlinesE. Hex Wrench SetE1. 2.5mmE2. 4mmF. Base Ring
Faucet Dimensions
Installer Tip:Shut off main water supply before installing new faucet.
Step 1: Install base
Insert base (C) into base ring (F) on sink or countertop with “FRNT” facing forward. Tighten screws on base (C) with 4mm hex wrench (E) until base is secure on base ring (F) on sink or countertop.
Installer Tip:Rotate the two half-moon shaped locking nuts inward before inserting base (C) into base ring (F) on sink or countertop.
Step 2: Install faucet
Insert hot & cold waterlines (D), one by one, into large hole of base (C). Align arrow on faucet body (B) with arrow on base (C). Attach faucet body (B) to base (C).
Installer Tip: Rotate the two half-moon shaped locking nuts inward before inserting base (C) into base ring (F) on sink or countertop.Note: ” ” on base should be in alignment with ” ” on faucet body.
Step 3: Secure faucet
Secure faucet body (B) by tightening the set screw with 2.5mm hex wrench (E).
Step 4: Connect waterlines
Thread the nut (1) on the supply line onto the outlet of the water supply valve (2) and tighten with wrench. Do not overtighten.
Step 5. Flush faucet
Remove aerator (A). Turn faucet on for 1 minute to flush any debris. Reconnect aerator (A).
Troubleshooting
If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:
| PROBLEM | CAUSE | ACTION |
| Water does not shut off completely | Cartridge (4) may need to be adjusted or replace | Remove index button (1A). Loosen set screw (1B) with 2.5mm hex wrench (11). Remove metal handle (1). Remove cartridge cover (2) by hand only. Remove locking nut with an adjustable wrench. Remove ceramic disc cartridge (4). Check for cracks. |
| Dripping from aerator | Washer may be missing or not seated correctly | Remove aerator (7). Make sure washer is present and seated correctly |
Replacement Parts
| Replacement Parts List | Finish/Color | Part # |
| 1. Handle Assembly | CH, SFS* | KP07100 |
| 2. Cartridge Cover | CH, SFS* | KP07100 |
| 3.Locking Nut | KP07100 | |
| 4. Cartridge | KP07100 | |
| 5. Seal Kit | KP07100 | |
| 6. Set Screw | CH, SFS* | KP07100 |
| 7. Aerator Assembly | CH, SFS* | KP07100 |
| 8. Set Screw | KP07100 | |
| 9. Base Ring | CH, SFS* | KP07100 |
| 10. Base | KP07100 | |
| 11. Hex Wrench Set (2.5mm & 4mm | KP07100 |
*Denotes faucet component color options: CH – Chrome SFS – Spot Free Stainless Steel
Care & Maintenance
To keep the product clean & shining, follow the steps below:
- Rinse with clean water & dry with a soft cloth
- Do not clean with soaps, acid, polish, abrasives or harsh cleaners ACID
- Do not use cloth with a coarse surface
- Unscrew the aerator and clean when necessary
This installation manual is subject to change without further notice. 9
Codes/Standards Applicable:
ASME A112.18.1 1.5GPM 5.7L/min maximum
FAUCET WARRANTY
Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”).Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.
Kraus warrants the mechanical components such as but not limited to sprayhood assembly (includes engine, aerators, structure, restrictors, back flow preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon and stainless steeled) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.
Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and workmanship under normal usage for a period of five (5) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the five (5) year term of the original owner or end-user.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.
RESTRICTIONS
This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets, unauthorized dealers, and/or sold on clearance.
This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage and wear down the finish.
This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.
This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.
This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages.
This warranty does not cover Marine or Outdoor Installation.Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code.
Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
COMMERCIAL WARRANTY
Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use.
All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
KRAUS USA has the right to change, modify, and/or update the warranty policy at any time. For the latest, most up to date comprehensive warranty, go to www.kraususa.com/warranty
If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050Toll-free 800-775-0703[email protected]
If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:
Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050516-801-8955[email protected]
If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050516-801-8954[email protected]
In requesting warranty service, please be ready to provide:
- Proof of purchase.
- A description of the problem.
report this adDownload the Kraus Care & Maintenance Guide at: http://www.kraususa.com/maintenance
IMPORTANT
Register Your Kraus ProductActivate Your WarrantyAccess Premium Customer SupportGet Product InformationREGISTER TODAYhttp://www.kraususa.com/registrationwww.kraususa.com
References
[xyz-ips snippet=”download-snippet”]