USER GUIDE
BATTERY-POWERED OUTDOOR MOTION SENSOR DUAL LED FLOOD LIGHT
NBOTLTFLBPA
COMPONENTS
OVERVIEW
- Lamp
- Motion sensor
- Mounting plate
- Battery compartment
- On/Off switch
INSTALLATION
Step 1:Place the mounting plate up against your wall and mark the screw positions.
Step 2:
- Using a drill, drill out the two holes for the screws.
- Insert the supplied wall plugs into the holes.
Step 3: Secure the mounting plate in place using the supplied screws.
Step 4:
- Remove the battery compartment cover and install x3 1.5V C batteries (not included) into the battery compartment. Ensure the polarity of the batteries is correct.
- Turn the On/Off switch to the on position.
- The lamps will illuminate for 15 seconds when motion is detected.
Step 5:Align the two holes on the rear of the floodlight with the clips on the mounting plate and attach the floodlight to the mounting plate until it snaps firmly into position.
report this ad
Need more information?We hope that this user guide has given you the assistance needed for a simple setup.For the most up-to-date guide for your product,as well as any additional assistance you may require,head online to help.kogan.com
[xyz-ips snippet=”download-snippet”]