Westinghouse WSFSFC92 10″ Orbit Oscillating Stand Fan Instruction Manual
Table of Contents
10″ Orbit Oscillating Stand Fan Ventilateur sur pied oscillant orbite de 10″Instruction Manual / Manuel d’instructionsWSFSFC92
SAFETY INFORMATION
DANGER – Immediate hazards which WILL result in severe personal injury or death
WARNING – Hazards or unsafe practices which COULD result in severe personal injury or death
CAUTION – Hazards or unsafe practices which COULD result in minor personal injury
When using electrical appliances, basic safety precautions should always be followed, including the following
IMPORTANT SAFEGUARDS
Read these safety instructions before using the fan for the first time and store them in a safe place. They contain important information on basic safety precautions that must be followed.
Use this appliance only as described in this manual. Using the appliance for other purposes may cause a fire or electric shock.
Only connect the appliance to a mains socket that matches the voltage specified on the appliance rating plate (120 V ~ 60 Hz).
This product is intended for household use only and not for commercial, industrial or outdoor use.
To prevent the risk of an electrical shock, do not place the appliance near a window where it may be exposed to rain. Never immerse the appliance, power cord, or plug in water or any other liquids.
This appliance can be used by children aged 8 and above and by people with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instructions concerning the use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and maintenance must not be done by children unless they are older than 8 years of age and supervised by an adult.
Close supervision must be provided when the appliance and remote control is used by or near children.
SAFETY INFORMATION
DANGER! CHEMICAL BURN HAZARD. KEEP USED AND NEW BATTERIES OUT OF THE REACH OF BABIES AND CHILDREN. Swallowing can cause severe internal burns and even death in as little as 2 hours. If you suspect that a child has swallowed a battery, or has inserted it into any part of the body (such as nose and ears), go to a hospital emergency room immediately.
WARNING! CHOKING HAZARD. Do not allow children to change batteries without adult supervision. If the battery compartment does not close properly, stop using the remote control and keep it out of the reach of children.
Always dispose of used batteries immediately. Dispose of batteries in compliance with your local laws and regulations.
WARNING! RISK OF EXPLOSION. Do not charge, reactivate, disassemble, burn, bury or short-circuit the batteries.
WARNING! Only use this appliance after it has been properly assembled.
WARNING! Avoid contact with moving parts. Never insert fingers, pencils, or other objects into the rotating fan blades or any openings of the appliance, as this may cause an injury, electric shock, fire, or damage to the appliance. Keep hands, hair, clothing, and jewelry away from the protective guards during operation to prevent injury.
Use the appliance upright on a dry, level, and hard surface.
Always ensure proper ventilation in the room when using the appliance.
WARNING! Do not let the power cord hang over the edge of a table or counter. Ensure that the power cord is not in a position where it can be pulled by children or pets, or tripped over.
CAUTION! To prevent the risk of fire, always keep the air inlets and outlets of the appliance clear of obstructions. Do not cover the appliance. Do not place the appliance directly against the wall, or use it in close proximity to curtains, tablecloths, etc.
WARNING! Always unplug the appliance from the wall socket:– before assembling/disassembling any parts,– before moving the appliance,– before cleaning and storing, or– when it is unattended.
To disconnect the appliance from the mains, grip the plug and pull it from the wall outlet. Do not pull on the cord.
Do not use the appliance in the presence of explosive and/or flammable fumes.
Do not place the appliance or any parts near open flames, or next to cooking or other heating appliances.
Never touch the appliance or plug with wet hands, as this may cause an electric shock.
DANGER OF ELECTROCUTION! Never use the appliance in the bathroom, or near any source of water or significant moisture (e.g. near a swimming pool, bathtub, basin, or in a damp basement, etc.). Do not place any objects filled with liquids (e.g. vases) near or on the appliance.
Do not use the appliance if any part is damaged or missing.
Only use the appliance with the original accessories and parts supplied. The use of accessories or fittings other than those supplied with this appliance may result in an injury, fire, or damage and will void the warranty.
If the power cord is damaged, it must be replaced by the manufacturer’s authorized service center.
DANGER OF ELECTROCUTION! This appliance has no user-serviceable parts. Never attempt to dismantle or repair the appliance yourself. The warranty will not cover any claim for damage due to mishandling.
WARNING! Never use a damaged appliance. Do not use the appliance after it malfunctions, or has been dropped or damaged in any manner. In case of malfunction or any damage, unplug the appliance and contact an authorized service center for repairs.
POLARIZED PLUG
The appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR ATTEMPT TO DEFEAT ITS SAFETY FEATURE IN ANY WAY.
WARNING:
CHOKING HAZARD! Keep small parts and the safety screw away from children and pets.
Before plugging in the appliance, always ensure that all parts are properly assembled and securely in place.
RETAIN THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY
HOW TO USE
DESCRIPTION OF PARTS
Front guard
Control panel and indicator lights
Fan blades
Extension pole
Outer pole
Remote control signal receiver
Rearguard
Height adjustment button
Motor unit
Base
Power cord and plug
Remote control
OVERVIEW OF CONTROL BUTTONS
To ensure optimal signal transmission, point the remote control (12) towards the signal receiver (6) on the base of the fan.
Control
Panel
Remote
Control
Function
Button
Press to turn the fan ON or to STANDBY MODE (stop). The indicator lights on the Control Panel indicate the current status
of the fan.
POWER
Press to adjust the wind speed: Low/ Medium/High/Turbo.
Control
Panel
Remote
Control
Function
Button
Press to switch between Normal Mode, Natural Mode, or Sleep Mode. The indicator light for the selected mode will turn on.
When Normal Mode is selected, the MODE indicator lights are off.
• Normal Mode: The fan delivers a constant flow of air at the speed selected (Low/Medium/High/Turbo).
• Natural Mode: This mode simulates a natural outdoor breeze. The flow of air automatically fluctuates at varying
speeds close to the range of the SPEED selected (Low/Medium/High).
• Sleep Mode Zzz: This mode simulates a gentle night breeze. The airflow for the selected SPEED (Low/Medium/ High) will follow Natural Mode, and the SPEED will automatically decrease one level every 30 minutes, and then remain at the lowest SPEED (Low).
MODE
LEFTRIGHT
oscillation
Press to start or stop the LEFT-RIGHToscillation.NOTE: To activate orbit oscillation, turn onthe LEFT-RIGHT and UP-DOWN oscillationfunctions.
UP-DOWNoscillation
Press to start or stop the UP-DOWN oscillation.
Control
Panel
Remote
Control
Function
Button
• TIMER: Press to set the Auto Off Timer and automatically turn the fan to STANDBY MODE (stop) at a later time. Press the button repeatedly to select the desired time from 1 – 7 hours. The indicator light(s) (1H/2H/4H) will illuminate accordingly.
• CHILD LOCK: To lock the buttons on the Control Panel (2), press and hold the button for 3 seconds until the indicator light next to the icon illuminates. Press and hold for 3 seconds again to unlock the buttons.
TIMER/CHILDLOCK
REMOTE CONTROL
Before first use, pull out the battery insulating strip from the battery compartment to start using the remote control. The battery is included with the product.
Replace the battery with the same or equivalent type of battery.Replacing the battery
Hold the remote control with the backside facing up.
On the bottom of the remote control, use your thumb (or a flat screwdriver) to push and hold the small locking clip towards the opposite corner of the clip. While still holding, pull the groove on the battery compartment to slide it out (Fig. 1).
Install a new battery (1 x CR2032 3V Lithium button battery) with the + side facing up and close the battery compartment.
DANGER! CHEMICAL BURN AND CHOKING HAZARD. KEEP USED AND NEW BATTERIES OUT OF THE REACH OF CHILDREN. If accidentally swallowed, seek medical attention immediately.
USING THE APPLIANCE
Place the fan upright on a dry, level, and stable surface.
To adjust the height of the fan, hold the neck of the fan head with one hand and press the height adjustment button (8) to release the extension pole (4). Adjust the height to one of the 3 positions. You will hear a “click” when the extension pole snaps into position.
Plug the power cord firmly into a 120 V ~ 60 Hz wall outlet. The fan will beep twice to indicate that it has entered STANDBY MODE.
Press the POWER button to turn the fan ON.
Press the buttons on the Control Panel (2) or remote control (12) to select the desired functions (see OVERVIEW OF CONTROL BUTTONS). The indicator lights on the Control Panel show the current status of the fan.
Once you have finished using the fan, press the POWER button to turn the fan to STANDBY MODE (stop), and then unplug the power cord from the wall socket.
INDICATOR LIGHTS – AUTO-DIMMING FUNCTIONThe Control Panel has an Auto-dimming function that reduces the brightness of the indicator lights 15 seconds after the last button is pressed. Press any button again, the brightness will back to normal.CAUTION! Always unplug the appliance from the wall socket when it is not in use to disconnect it completely from the power supply.WARNING! Never adjust the height of the fan while the appliance is on.
CLEANING AND CARE
WARNING! Before cleaning, always unplug the appliance from the wall socket. Wait until the blades have come to a complete stop.WARNING! To avoid electrical hazards, never immerse the appliance, power cord, or plug in water or any other liquids. Never rinse them under the tap or spray with liquids. Make sure water does not get into the motor, control panel, or electrical parts while cleaning.NOTE: Never use solvents, chemical or abrasive cleaning agents, wire brushes, sharp objects, or scouring pads to clean the appliance. Do not use gasoline, benzene, thinner, or alcohol to clean the appliance.
Clean the fan on a regular basis (every month or more often as required). For optimal performance, make sure the fan is clean at all times.
General cleaning: To remove dirt and dust, wipe down the exterior of the appliance with a soft cloth/sponge lightly moistened with water or warm soapy water. Dry the appliance completely after cleaning.
DISASSEMBLING THE FRONT GUARD AND FAN BLADES FOR CLEANING
Unplug the fan and remove the safety screw from the bottom of the front guard (1) with a screwdriver (Fig. 2).
Turn the front guard (1) anti-clockwise to unlock, and then pull it out.
Turn the fan blade cap clockwise to remove it.
Pull the fan blades (3) to remove them from the motor shaft.
DO NOT disassemble the rear guard (7) and motor unit (9). Only wipe the surfaces with a soft dry cloth, or a soft cloth lightly moistened with water. Gently remove dust with a soft dry toothbrush if necessary. Dry with a soft cloth and allow to air dry completely.
After removing the front guard (1), fan blade cap, and fan blades (3), rinse them under the tap or clean them in warm soapy water with a soft sponge/cloth. Dry thoroughly after cleaning.
Allow all parts to dry completely before reassembling them.
report this ad
STORAGE
If the fan will not be used for a long period of time, unplug the fan and store it in its original box.
Store in a cool, dry, and well-ventilated place, away from dust.
Do not wrap the power cord tightly around the appliance or apply tension, as this may damage the appliance.
Remove the battery from the remote control to prevent leaks.
DISPOSAL
Proper disposal of this product.This symbol indicates that this appliance may not be treated as household waste. Instead, it should be taken to the appropriate collection point for recycling electrical and electronic equipment. Please use the return or collections services available in your community or contact the retailer where you purchased thisproduct.
INFORMATION AND SERVICE
If you have questions or concerns about your product, please visit our website: www.westinghousehomeware.com, or contact our overseas offices/agents.In line with our policy of continuous product development, we reserve the right to change the product, packaging, and documentation specifications without prior notice.Model: WSFSFC92Voltage: 120 V/AC, 60 HzAdjustable height: 120 mmPower: 60W
and Westinghouse are trademarks of Westinghouse Electric Corporation,a USA company. Used under license by Westinghouse Homeware (HK) Co.All Rights Reserved.WSFSFC92 • 11/20