Congratulations on purchasing your NutriBullet Juicer Pro™. We’re thrilled you’ve chosen to optimize your health and vitality. Since we want your experiences with NutriBullet ® to be fantastic, please read these safety and cleaning instructions before each use. Enjoy your NutriBullet Juicer Pro™!
Important safeguards.
Warning! To avoid the risk of serious injury, carefully read all instructions before operating your NutriBullet Juicer Pro™. When using any electrical appliance, basic safety precautions should always be observed, including the following important information.
Save these instructions!FOR HOUSEHOLD USE ONLY
GENERAL SAFETY INFORMATION
- This juicer system has sharp blades and moving parts and is NOT intended for use by children who lack experience and knowledge of its safe operation. They require close supervision and thorough instruction on its proper use and safe operation.
- This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
- Children shall not play with the appliance.
- The appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and if they understand the hazards involved.
- To protect against fire, electrical shock, and injury to persons, do not immerse the juicer, motor base, cord, or plug in water or any other liquid.
- Turn the juicer OFF, then unplug from the outlet when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
- AVOID CONTACT WITH MOVING PARTS.
- Regularly inspect the power supply cord, plug, and actual juicer for any damage.
- Do not operate this appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner.
- If the supply cord is damaged, it must be replaced by the NutriBullet Outlet, another official service agent, or similarly qualified persons in order to avoid a hazard.
- The use of attachments not recommended or sold by NutriBullet® may cause fire, electric shock, or injury.
- This juicer is for household use only. Do not use this juicer for anything other than its intended use. Do not use it in moving vehicles or boats. Do not use outdoors.
- Do not let the power cord hang over the edge of a table or countertop.
- Do not let the power cord touch hot surfaces, such as a stove or let it become tangled or knotted.
- Always make sure the pulp basin cover is securely in place (with the locking handle in its upright and locked position) before the motor is turned on. Do not unlock the locking handle while the juicer is in operation.
Always ensure the juicer is turned OFF after each use. Before disassembling, make sure the sieve has stopped rotating and the motor has completely stopped.
- Do not push food into the feed chute with your fingers or utensils. Always use the food pusher provided. Do not place your hand or fingers into the feed chute when it is attached to the juicer. If food becomes lodged in the feed chute, use the food pusher provided or another piece of fruit or vegetable to push it down. Turn the motor off and ensure that all moving parts have stopped before disassembling the juicer to remove the remaining pulp.
- Do not use the juicer if the rotating sieve is damaged.
- Do not use the juicer without the pulp basin and basin cover attached to the motor base. Please see assembly instructions for proper placement.
- Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
ADDITIONAL SAFEGUARDS
Remove and safely discard any packaging material or promotional labels before using the juicer for the first time.To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this juicer.Do not touch the small cutting blades/ teeth on the bottom/base of the sieve. BLADES ARE SHARP! HANDLE WITH EXTREME CARE!Keep fingers away from the sharp blade in the feed chute.Always make sure the Juicer is properly and completely assembled before connecting to a power outlet and operating.Ensure that the surface where the appliance operates is stable, level, clean, and dry.
- Vibration can occur during normal operation.
- CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an externalswitching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
- If extreme vibration occurs, discontinue use and email Customer Service: [email protected].
- If the juicer leaks or there is a spill under r around the juicer, or onto the juicer itself, clean and dry before continuing use.
- When using this juicer, make sure there is adequate air space around and under it for proper air circulation. This juicer is only designed to juice fruits and vegetables. Please refer to the juicing guide to determine the correct speed for the fruits and vegetables selected for juicing. Do not use any frozen fruits or vegetables.• Hard fruits and vegetables will put excess strain onto the motor if a low speed is selected.• Remove rind from all citrus fruits before juicing.• Do not juice stone fruit unless pits or seed stones have been removed. Do not leave the appliance unattended while in use. Keep hands, fingers, air, clothing as well as spatulas, and other utensils away from the appliance during operation. Keep the juicer clean. Refer to the care and cleaning section for further information. Any maintenance other than cleaning should be performed by an authorized electrician or the NutriBullet Outlet.Do not attempt to repair or service this juicer, contact Customer Service for assistance at [email protected] or [email protected].If any of the instructions or warnings are not understood please contact Customer Service for assistance at[email protected].
What’s included.
Assembly guide.
Assembly & use.
- Place the Motor Base on a dry, level countertop Ensure the dial is set to the “OFF” position and the unit is unplugged.
- Place the Pulp Basin on top of the Motor Base. Align the Pulp Basin with the Motor Base so that the spout is aligned with the dimpled side of the Motor Base.
- Align the Sieve with the motor drive coupling and push it down until it clicks into place. Handle the Sieve by gripping the top edges being careful not touch the sharp teeth on the base of the Sieve. Ensure the Sieve is properly seated in place and securely inside of the Pulp Basin.
- Place the Basin Cover over the Sieve and Pulp Basin. The side “ears” on the Basin Cover should align with the “ears” on the sides of the Pulp Basin.
- Raise the Locking Handle and move it into the “ears” on each side of the Basin Cover. The Locking Handle should be in a vertical position and locked into place. NOTE: if the Locking Handle is not securely in place, the juicer will not power on.
- Swing the No-Drip Spout cover-up vertically so that it is no longer covering the juice spout.
- Place the Juice Pitcher Lid on top of the Juice Pitcher, and open the locking lid latch.
- Slightly angle the Juice Pitcher and place it under the juice spout. Align the spout with the hole in the Juice Pitcher Lid and level out the Juice Pitcher. It will fit snuggly into the spout to hold it in place.
Usage instructions.
- Gather all of your desired ingredients. Wash and prepare them for juicing.
- After the juicer is fully assembled, plug the power cord into an outlet.NOTE: If no speed is selected after 10 minutes, the unit will power off.
- Select a speed to begin juicing. The speed selected will illuminate on the control panel. You may start at any speed and can toggle between speeds as desired depending on the type of produce (refer to the chart on page 8 for recommended speeds for each type of produce).NOTE: always start the juicer before putting food in the feed chute.
- To operate the Dual-Size Food Pusher, grip the outer edge of the top of the pusher with one hand and the bottom of the pusher with the other hand. Twist the top of the pusher clockwise to unlock the inner pusher. (The inner pusher is thinner than the full pusher.)
- If you are using smaller ingredients (smaller fruits, leafy greens, stalk vegetables like celery or carrots), place the outer part of the pusher into the chute, making the chute more narrow. While the motor is running, begin gently guiding ingredients into the internal chute using the inner pusher.TIP: When using the narrow chute for juicing leafy greens, take a small handful of greens and squeeze them into a tighter bunch. Place the bunch into the chute and slowly push it down into the Sieve. Using the narrow chute will help to prevent any pieces from flying up out of the chute.
- If you are using larger ingredients, keep the feed chute empty (creating a wider chute) and lock the inner pusher back inside the outer pusher. While the motor is running, begin gently guiding your ingredients into the feed chute using the full Dual-Size Food Pusher.NOTE: You may alternate between the two chute sizes (narrow and wide) as you are juicing.WARNING: Do not use excessive force when pushing food down with the Food Pusher, as it will not allow for maximum juice yield.WARNING: Never use hands/fingers or other tools to push ingredients down the feed chute into the Sieve. Only the Food Pusher should be used to push down ingredients.
- The juice will begin to flow out of the spout and into the Juice Pitcher, while the pulp will be separated and stored in the Pulp Basin.
- When the Pulp Basin is completely full, it must be emptied before continuing juicing. See disassembly instructions.
- To stop juicing, press the speed at which you are currently juicing. To completely power off the juicer, press the center power button and wait for the Sieve to stop spinning. Unplug the unit after each use.
- Remove the Juice Pitcher from under the spout. You may close the Juice Pitcher Lid and store juice in the Juice Pitcher if desired.NOTE: To do this, you’ll first need to tip the Juice Pitcher forward at a slight angle, so that the lid’s large hole has some separation from the spout, then you can slide out the pitcher.This is the reverse of what you did during assembly.
- Immediately move the No-Drip Spout cover downward over the spot to avoid any residual drips onto the unit or onto the surface below the juicer.
NOTE: If no speed is selected after 10 minutes, the unit will power off.
TIP: When using the narrow chute for juicing leafy greens, take a small handful of greens and squeeze them into a tighter bunch. Place the bunch into the chute and slowly push it down into the Sieve. Using the narrow chute will help to prevent any pieces from flying up out of the chute.
TIP: We recommend using your left hand to pull the Juice Pitcher away, while using your right hand to swing the No-Drip Spout cover down and over the spout opening.
Control panel.
MULTI-SPEED CONTROL PANEL & JUICING SETTINGS.
OFF:
Power is OFF. If the unit is ON, the center power button will be illuminated. Pressing the center button will turn the unit OFF.LOW:
Best for juicing softer fruits and vegetables.HIGH:
Best for harder produce like pineapples.TURBO:
Best for juicing the toughest vegetables like beets or carrots.
Juicing tips.Juicing speed selection guide
| INGREDIENTS | SPEEDS | VITAMINS / NUTRIENTS |
| Apple | Turbo | source of quercetin |
| Beets | Turbo | excellent source of folate |
| Blueberry | Turbo | good source of vitamin C |
| Broccoli | Turbo | high in vitamin C, high in folate, a good source of potassium |
| Brussels Sprouts | Turbo | high in vitamin C, a good source of folate |
| Cabbage | Low | high in vitamin C |
| Carrots | Turbo | excellent source of vitamin A, a good source of vitamin C |
| Cauliflower | Turbo | high in vitamin C, a good source of folate |
| Celery | Turbo | good source of vitamin C, a good source of vitamin A |
| Cucumber | High | good source of vitamin C |
| Fennel | Turbo | good source of vitamin C and potassium |
| Ginger | Turbo | contains vitamin C, magnesium, and potassium |
| Grapes | Low | good source of vitamin K |
| Grapefruit | Low | high in vitamin A, high in vitamin C |
| Kale | High | excellent source of vitamin A and vitamin C, a good source of calcium and potassium |
| Kiwi | Low | high in vitamin C, a good source of potassium and vitamin E |
| Lemon | Low | high in vitamin C |
| Lime | Low | high in vitamin C |
| Melons (all) | Low | high in vitamin A, high in vitamin C |
| Orange | Turbo | high in vitamin C |
| Peaches | High | good source of vitamin C |
| Pears | High | good source of vitamin C |
| Pineapple | High | high in vitamin C |
| Plums | High | good source of vitamin C |
| Raspberries | Low | high in vitamin C |
| Spinach | Low | high in vitamin A, vitamin C, iron, and folate, a good source of magnesium |
| Sweet Potato (raw) | Turbo | good source of potassium, high in vitamin A and vitamin C |
| Tomatoes | Low | high in vitamin A, high in vitamin C, a good source of potassium |
Proper produce prep
Prepare fruit and veggies before inserting them into the juicer:
- Properly clean produce (rinse with produce wash, or lukewarm water and apple cider vinegar).
- Peel or remove the skin as needed, and chop food items down to the right size – just small enough to fit easily into the feed chute, without having to force the pieces down with the Food Pusher.
- Remove rind from all citrus fruits before juicing.
- Remove large pits and seeds from stone fruits before juicing.
Feed chuteSelecting which Food Pusher to use (narrow or wide) affects feed chute thickness. If you pull out the thinner inner food pusher from within the full pusher, you’ll place the outer part into the chute, making the chute narrow. If you use the full (wide) pusher, the feed chute will be wider.
- Never place your hand or fingers into the feed chute when it is attached to the juicer.
- Always start the juicer before adding food to the feed chute. The unit must be running when items enter it.
- Do not overload the feed chute. Items must be added gradually, at a pace the juicer can keep up with.
- Use only the provided Food Pusher to push food into the feed chute. Never use fingers, utensils, or any other apparatus.
- Never use excessive force to push items into the feed chute.
- When juicing, ensure all produce has moved through the feed chute and into the Sieve before adding more.
- If any food gets stuck in the feed chute, use the Food Pusher to move it down the chute and into the Sieve.
Consuming juice and pulpInstead of composting or throwing away the pulp left over after juicing, you can choose to consume it. See our Recipe Guide* for some fun tips on hat to do with the leftover pulp. By using these creative ideas, you can enjoy pulp in a variety of delicious (and healthy) ways.
- Whether you prefer sweet or savory, you can use pulp to create some tasty treats!
- For best taste, consume fresh juice and pulp within 48 hours of juicing.*[email protected]
No-go foodsFoods that should NEVER be used in this juicer:
- Thicker foods that do not contain juice to extract (for example, bananas or avocados).
- Frozen fruits or vegetables.
- Stone fruits that have large pits or seeds that have not been removed. Stone fruits may be used only if the seed or pit has been removed.
Overheating, Speed Selection & Auto Shut-Off
- If the motor overheats, the juicer will turn off.
- If the juicer stops working, unplug it and allow it to cool down for at least fifteen minutes before attempting to use it again.
- Refer to the Troubleshooting section for instructions on what to do if the unit turns off or is not working.
Disassembly.
- Ensure the unit is powered “OFF” and unplugged.
- Remove the pitcher from under the spout. To prevent drips use the No-Drip Spout cover to close the juice spout.
- Unlock the Locking Handle from the Basin Cover by pulling the handle backward out of the “ears” on either side of the Basin Cover. Move the handle down.
- Remove the Pulp Basin from the Motor Base by pulling upwards with the Basin Cover and Sieve still in place and take it directly to your sink.
- Remove the Food Pusher by lifting it out of the feed chute.
- Lift the Basin Cover vertically off of the Pulp Basin and remove any pulp from the inside of the cover. You may use the flat end of the Cleaning Brush to scrape the pulp off of the cover.
- Gently lift the Sieve vertically out of the center of the Pulp Basin. Clean the Sieve right away (see care instructions).
- Empty the Pulp Basin. Use the flat end of the Cleaning Brush to easily scrape out the pulp and set it aside for use in other recipes or composting. Or empty the pulp into your waste bin or compost.
Care & maintenance.
Cleaning the NutriBullet Juicer Pro™ is quick and easy. All components except for the Food Pusher and Motor Base are dishwasher safe. Read on forsome cleaning tips and best practices.
- Always ensure the Motor Base is unplugged before you begin assembly, disassembly, cleaning, or storage of the unit.
- Once the Pulp Basin is emptied, rinse all parts under running water.
- Use the Cleaning Brush to scrub the Sieve under running water. Be sure to properly clean the Sieve every time you juice, as minerals from fruits and vegetables can cause build-up in the Sieve which may prohibit maximum juice extraction.WARNING: Always use precaution when cleaning the Sieve, as it contains sharp blade teeth on the flat disc part.TIP: Always clean the Sieve as soon as possible after juicing using the Cleaning Brush. If allowed to sit, the pulp will dry on the Sieve and it will become more difficult to scrub blocked holes. If this happens, be sure to allow the Sieve to soak in hot water for 30 minutes.
- All Juicer Pro components except the Food Pusher and Motor Base are dishwasher safe. You may also hand wash with warm soapy water.TIP: Do not use the Sterilize cycle on your dishwasher to clean your juicer as it may cause parts to deform.
- Wipe down Motor Base with a clean, damp cloth.WARNING: Never submerge Motor Base into water or other liquid.Cleaning instructions for your NutriBullet Juicer Pro™ storage accessories:• Glass Storage Bottles and lids are dishwasher safe.• Freezer Trays and lids are dishwasher safe.
Juice & unit storage.
Included with your Juicer Pro are some great storage accessories: a Juice Pitcher, two Juice Storage Bottles, and two Freezer Trays. The storage accessories give you three options for storing juice:
- IN THE PITCHER:The Juice Pitcher stores up to 800 ml. Make sure to store the pitcher upright in your refrigerator, with lid tightly sealed, latch closed, and nothing atop the lid.
- IN THE BOTTLES:Use each Storage Bottle to save up to 350 ml of juice, so you can enjoy it later — either at home or on the go. Fill up the bottles leaving about 6,5 mm of room at the top, leaving just enough air in the bottle.
- IN THE TRAYS:Each Freezer Tray holds a total of approx. 480 ml: one tray has eight 60 ml wells, and the other tray has four 120 ml wells. These are a great way to preserve juice longer-term, then defrost it anytime for a full drinkable portion. Or, use the trays to make frozen juice shots. (See and download our Recipe Guide @nutriliving.shop for some inspiring recipes for frozen juice shots to add to your favorite beverages, or to drink on their own.)For best taste, consume fresh juice and pulp within 48 hours of juicing.Do not place anything on top of the Pitcher Lid when storing it in the refrigerator.Store remaining pieces of the unit in a safe place where they will not be damaged and won’t cause harm as some pieces are sharp!
Troubleshooting.
- PROBLEM: The power button flashes three times and then remains illuminated when selecting a speed.SOLUTION: This means that the unit is not properly assembled. Ensure the Pulp Basin is properly seated on top of the Motor Base, and the Locking Handle is locked into place.
- PROBLEM: The juicer stopped in the middle of juicing, and the power button flashed.SOLUTION: Ensure the Locking Handle is securely locked into place.
- PROBLEM: The juicer stopped in the middle of juicing, and the power button remains illuminated.SOLUTION: You have exceeded 10 minutes of continuous running time. Unplug the juicer and keep the unit off for 15 minutes before continuing use.
- PROBLEM: The juicer has stopped running, and all lights flashed three times.SOLUTION: The juicer has overheated. Unplug the unit and allow it to cool down for 15 minutes before continuing use.
Replacement parts.
To order additional parts and accessories, please visit our website at neutralizing. shop or contact Customer Service at [email protected].For Nordic countries: www.nutribullet.nu or email [email protected].
Warranty registration.
Please visit neutralizing. shop to register your new NutriBullet Juicer Pro™.You will be asked to enter the Serial Number* of your product, along with the purchase date and name of the shop of purchase. The registration will enable us to contact you in the unlikely event of product safety notification. By registering your product you acknowledge to have read and understood the instructions for use, and the warnings set forth in the accompanying instructions. To find the serial number, check under the Motor Base.If you cannot find the serial number, please send an email to [email protected] for assistance.
Happy with your NutriBullet?
Share your recipes, posts, tips & tricks! Like &follow us @nutribulletTag your blends #nutribullet #nutribullet.se#nutribullet.dk #nutribullet.nor #nutribullet.fi
REFER A FRIENDGIVE 10% GET 10%Spread the news about how much fun & benefit your NutriBullet Juicer is giving you! Surprise a friend by giving him/her a 10% discount to buy a NutriBullet product of their choice!Code: 4MYFRIEND10To thank you for sharing we offer you a 10%discount on your next purchase! Code: THANKU10Unsure of where to start? The recipe guide outlines everything you need to master the art of juicing. In addition to user instructions, best practices, and juice recipes, this booklet includes ideas for tasty treats made with leftover fruit and veggie pulp, ensuring no valuable plant-based nutrients go to waste.
Visit www.nutriliving.shop and download your copy!
Illustrations may differ from the actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.
__________________________________________________
Technical specifications:Voltage: 220-240VFrequency: 50/60HzProtection Class: IIManufactured for:NUTRIBULLET®, LLCLOS ANGELES, CA 90025, U.S.A.Made in CHINAImported and distributed by:NutriBullet Retail • 1251 NA-11 the Netherlandswww.NutriLiving.shopFor Nordic countries: www.nutribullet.nuQuestions? [email protected]Service? [email protected]For Nordic countries: [email protected]
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE.
report this adThe shape and appearance of this manual are the trademark and trade dress of OmniChannel Group B.V. © 2020 All rights reserved. | V2020-08
References
[xyz-ips snippet=”download-snippet”]