truelife Pulse BT Instruction Manual

truelife Pulse BT Instruction Manual

INSTRUCTIONS FOR USE

BOX CONTENTS
  • 1× Blood pressure monitor
  • 1× Arm cuff
  • 1× Storage case
  • 4× 1.5V AA alkaline battery
  • 1× Manual
  • 1× Safety Instructions

The pressure monitor measures blood pressure (systolic and diastolic) using the oscillometric method and also heart rate.

PRODUCT DESCRIPTION

1. Display2. Inlet for cuff hose3. Arm cuff4. Change user5. Power6. Up/down7. AC adapter input8. Memory9. Average value10. Time settings11. Alarm12. Volume

Display description

1. Alarm 12. Date3. Time4. Severe hypertension5. Moderate hypertension6. Mild hypertension7. Elevated normal pressure8. Normal pressure9. Optimal pressure10. Improperly fitted cuff11. Alarm settings12. Date and time settings13. Average value mode14. Motion during measurement15. Memory16. Current entry in memory17. User18. Total memory19. Low battery indicator20. Bluetooth21. Heart rate symbol22. Irregular heartbeat indicator23. Heart rate24. Air discharge indicator25. Diastolic (lower) blood pressure26. Pressure indicator27. Systolic (upper) blood pressure28. Volume level29. Alarm 2

BATTERY INSTALLATION

Remove the battery cover on the back of the monitor unit and insert 4× 1.5V AA batteries. Make sure that the batteries are inserted according to the polarity indicated in the battery compartment. Do not use batteries that are past their expiration date.The battery must be replaced when the battery symbol and „E6“ appear on the display after switching on the monitor. The symbol together with the code indicate a low battery level. With a critically low battery level, the device will not take readings. This device is not suitable for rechargeable batteries.If you will not be using the device for a long period of time, remove the batteries.

USING THE AC ADAPTER

(The AC adapter is not included. It can be purchased as an optional ac-cessory.)

a) Connecting

1. I nsert the adapter connector into the DC jack on the right side of the monitor unit.2. Plug the adapter into a 100–240 V socket.3. The monitor will turn on.

b) Disconnecting

1. Unplug the adapter.2. Pull the adapter connector out of the DC jack on the side of the monitor.

Note: Only use the original adapter.Note: When using the adapter, you can leave the batteries inside the device.

SETTING THE DATE AND TIME

The unit automatically enters the date and time settings menu after the batteries are inserted or the power adapter is plugged in. This can manually be accessed by holding the time settings button for 5 seconds.

1. „Year“ flashes on the display.2. Use the up/down and arrows to set the correct year and confirm with the power button.3. Continue in the same way to set the month > day > hour > minute.

IMPORTANT: The first time you set up the device, you must set the exact date and time. If it is not set correctly, the values will not be correctly copied to the calendar when the readings are transferred to a mobile device.Note: The readings are stored in the memory when the batteries are replaced. However, you will need to set the date and time again.

ADJUSTING THE VOLUME

The blood pressure monitor uses audible alerts for some functions. The volume of these alerts can be adjusted.

1. Press the volume button to enter volume settings.2. The volume icon will start flashing.3. Use the up arrow to increase the volume and the down arrow to decrease it.4. After setting the desired volume, press the power button to confirm and exit the mode.

SETTING AN ALARM

You can set two audible alerts on the monitor – alarms.

  1. Press the alar button to enter the alarm settings.
  2. The alarm icon will flash on the display. Press the alarm button again and choose between two alarms ( or ).
  3. When the icon you have selected flashes, you can use the up and down buttons to toggle between turning the alarm on and off. Press and hold the alarm button until the alarm icon stops flashing.
  4. Continue by setting the alarm time. First, use the up and down buttons to set the hour and confirm with the power button.
  5. Continue in the same way to set the minutes.
  6. Finally, confirm everything with the power button and you will exit the alarm settings.
  7. If you want to turn off the set alarm, follow the same steps as you would when setting the alarm, and then select the icon in point 3 to. Confirm with the power button.

MEASURING BLOOD PRESSURE

Several factors play a role in measuring blood pressure. For the most accurate values, you must follow the following principles.

  1. Before taking a measurement, be completely at rest for 5–10 minutes. If you have been performing heavy manual work before taking the rea-ding, rest for an hour to an hour and a half.
  2. Do not smoke, drink caffeinated beverages or alcoholic beverages for at least half an hour before the measurement and limit the intake of foods that could cause an increase or decrease in blood pressure.
  3. If you feel a strong urge to urinate, do not take a reading but empty your bladder first. A full bladder can cause an increase in blood pressure of up to 10 mmHg.
  4.  Take measurements on your bare arm while sitting upright and comfortably.
  5. Rest the cuffed arm loosely on a flat surface. The cuff should be at the same height as the heart.
  6. Always measure on the same arm – ideally on the left. However, if the pressure on your right arm is higher, give preference to measurements on this side.
  7. Whilst taking a reading, even minor activities can increase the pressure by 5 mmHg. Therefore, do not move or talk whilst taking a measurement.
  8. Repeat the measurement at least twice with an interval of at least one minute between each reading so as to release the pressure in the vessels completely.
  9. Take measurements regularly and at the same time. Only regular measurements at the same time of day over a long period of time allow for a meaningful assessment of blood pressure values.
Attaching the cuff

Any effort to support your arm whilst taking a reading can increase pressure and distort measurement results. Hold the arm on which you are taking a reading so that the cuff is roughly at the level of the heart. This will take the most accurate measurement.

  1. Put the cuff on your left arm so that the hose faces downwards and the lower part of the cuff so that it is approximately 1–2 cm above the elbow.
  2. Make sure that the cuff is not tightened too tightly. You should be able to tuck two fingers between the cuff and arm.
  3. Place your hand on the table with your palms pointed upwards so that you feel comfortable with the cuff roughly at heart level. Do not bend the hose.

If it is not possible to use your left arm for a reading, you can also take measurements on your right arm. However, the measurement should only be carried out on one arm.

Taking measurements

1. Press the power button to enter measurement mode.2. The icon of the currently selected user starts flashing on the display. Use the switch to select user 1 or user 2 .3. After selecting the user, the cuff will automatically start to inflate and the blood pressure measurement process will begin.4. Whilst taking a blood pressure reading, the heart rate is also measured. The heart icon flashes at the same heart rate as the heart.5. Once the measurement is complete, the display shows the values of systolic and diastolic blood pressure and the heart rate value below.

Note: If you want to stop the measurement for any reason, just press the power button.

DISPLAY READINGS TAKEN AND AVERAGE VALUE

Before displaying the average and previously taken readings, first select the user for whom you want to display the values using the switch.The device can store 480 readings per user. If the memory is exceeded, the oldest entry is erased. To display the readings, follow the instructions below.

1. Press the memory button to enter memory mode.2. The display shows the most recently taken readings of the user. The date and time of the measurement can also be seen on the display.3. Use the up and down buttons to display older values.

You can also view average values on the monitor. To display them, follow the instructions below.

1. Press the average value button to enter average value mode.2. The display shows the average of the last three measurements.3. Use the up and down buttons to view average values for the last 7 days measured in the morning – AM (5:00–9:00) and in the evening – PM (18:00–20:00).

DELETE STORED VALUES

In the blood pressure monitor, you can delete either the individual rea-dings taken, or all the readings taken of the selected user.

Note: Always make sure that the correct user is selected and that wrong rea-dings are not deleted.To delete each value, follow the instructions below.

  1. Press the memory button to enter memory mode.
  2. Use the up and down buttons to select the value you want to delete.
  3. Once you have selected the value, hold down the memory button until CL — appears on the display.
  4. When CL — is displayed, press the memory button to confirm. Cl 00 will then appear on the display. The value is now deleted.

If you want to delete all rea-dings taken of the selected user, follow the instructions below.

1. Press the average value button to enter memory mode.2. Hold down the average value button until CL — appears on the display.3. When CL — is displayed, press the average value button to confirm. Cl 00 will then appear on the display. All readings taken of the selected user have now been deleted.

TRANSFERRING READINGS TO A MOBILE DEVICE

The TrueLife Pulse BT blood pressure monitor allows you to transfer the readings to your mobile device so you can keep them with you at all times. Below you will find instructions on how to transfer values.First, you need to download, install and register the app.

  1. Download the MedM Health app to your mobile device for free. It can be found on Google Play for Android phones or the App Store for iOS phones.
  2. Install and open the app.
  3. Continue by registering in the application. Fill in your email address and password. This information is used as login information.

Once you have registered, you can sign in with the email address and pass-word you entered when you registered. Next, you need to pair the mobile device with the blood pressure monitor. Follow the instructions below.

  1. Make sure that Bluetooth is enabled on both the mobile device and the blood pressure monitor.
  2. To turn Bluetooth on/off on the blood pressure monitor, press the time settings button twice in succession. This will access Bluetooth settings. Use the up and down buttons to turn Bluetooth on or off. If the Bluetooth icon flashes on the display, it is turned on. If the icon does not flash, Bluetooth is off.
  3. Open the MedM Health app on your mobile device and then press „My Devices“ on the app menu and then „Insert New“. The mobile device starts searching for the blood pressure monitor.
  4. On the blood pressure monitor, press the average value button. The monitor will then start transmitting a Bluetooth signal.
  5. When the mobile device successfully finds the blood pressure monitor, the app will display a picture of the monitor with the word „BPM Smart“. Press the image, and then „Add to Device“. The mobile device will start pairing with the blood pressure monitor.
  6. When pairing is complete, the monitor will be added to the app.Note: The blood pressure monitor must be transmitting a signal throughout the pairing process. If the icon stops flashing on the monitor display, press the average value button again to resume signal transmission.

Your blood pressure monitor is now paired to your mobile device. To transmit the readings, follow the instructions below.

  1. Make sure the mobile device is near the blood pressure monitor. The maximum distance is 5 meters.
  2. Open the MedM Health app on your mobile device.
  3. In the app on your mobile device, press the blue icon that says „Blood Pressure“ on the home screen. In the newly opened window, tap the blood pressure monitor image and the words „Press to connect“.
  4. Make sure Bluetooth is enabled on the blood pressure monitor and press the average value button to enter average value mode.
  5. The readings are then transferred from the blood pressure monitor to the mobile device. Tap the „Save“ button and the values will be saved to the app.

Note:

  • If transmission of the readings fails, the error message „E7“ will appear on the blood pressure monitor display. Make sure Bluetooth is enabled on both your mobile device and the blood pressure monitor. Then repeat the transfer. Note: The blood pressure monitor comes with Bluetooth turned on automatically. In places where the use of a Bluetooth device is prohibited, disable Blue-tooth as per the instructions.
  • The MedM Health app is provided by a third party. Elem6 s.r.o. assumes no responsibility for the data you provide.
  • The application is not a medical device. The application is used only for storing measured data on a mobile device. Stored measured data is not sent or consulted with doctors in any way.
  • The application does not replace a consultation with a specialist, especially a doctor, or any medical care. It is also not for diagnostic purposes. Note: If you have any questions about your condition, always contact your doctor.
  •  Neither MedM Health nor elem6 s.r.o. are providers of healthcare or medical consultations.

IRREGULAR HEARTBEAT

Irregular heartbeat is defined as a rhythm that is 25% lower or 25% higher than the average rhythm measured by the device whilst measuring blood pressure. If the device detects irregular heart rhythm two or more times during the measurement, an irregular heart rhythm icon appears on the display when the reading is displayed.If the irregular heart rhythm icon is displayed frequently after taking a rea-ding, we recommend seeing your doctor for a check-up.

TABLE OF VALUES

Below you will find sample tables of blood pressure values. Tables are not used to determine the diagnosis. Always consult your doctor regarding the results.

ERROR MESSAGES AND TROUBLESHOOTING

If any of the following problems occur whilst taking a reading, please refer to the table below.

SPECIFICATIONS

SAFETY WHEN WORKING WITH THE DEVICE1. Carefully read the attached safety instructions.2. For the correct handling of the product, read the latest version of the manual, which is available for download at www.truelife.eu.

Print errors and information changes reserved.Note: This product is intended for use in homes and similar environments. We declare that if the TrueLife Pulse BT is used as a professional medical device, a safety inspection (BTK) must be carried out regularly at the following intervals: 24 months after purchase of the product, then every 12 months.

Importer:elem6 s.r.o., Braškovská 15, 16100 Prague 6, Czech Republic, Made in P.R.C.

report this ad

Shanghai International Holding Corp. GmbH (Europe)Eiffestrasse 80, 20537 Hamburg, GermanyGrandway Technology (Shenzhen) Limited, No. 5, the Second Industrial Zone, Zhukeng Community, Longtian Street, Pingshan District, Shenzhen, 518118, The People‘s Republic of China

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

,