PAMAPIC 11 Ft x 11 Ft Pop Up Canopy With Netting
PACKING INCLUDES
Part List
Hardware
ATTACH THE BIG TOP
Step 1
ATTACH TNE SMALL TOP & UNFOLD THE CANOPY
Step 2
LOCK THE FRAME BEFORE ADJUSTING THE HEIGHT OF THE CANOPY
Step 3
INSTALL MOSQUITO NET ACROSS THE OUTSIDE OF LEG ASSEMBLY
Step 4
ATTACH THE MOSQUITO NETTING
Step 5
You will need:
- Secure the ends of the ropes to adjacent corners of the frame above each leg by tying a knot.
- Reinforce the ropes on each side by securing them with the included velcro straps.
- Finish attaching the large canopy inside the canopy frame using the Velcro loops.
- Open the curtain rings and loop them through the sewn-in loops on the top edge of the mosquito netting.
- Secure the mosquito netting to the ropes using the curtain rings. Continue around the canopy until the entire mosquito net is secured.
- The netting/curtains can be tied back once attached.
SECURE THE CANOPY IN PLACE
Step 6
SECURE THE CANOPY IN PLACE
Step 7
TAKE DOWN THE CANOPY
- Remove the mosquito netting if attached.
- Pull up all stakes from the ground.
- Press the push pin on each leg and retract the legs to their original height.
- Push the push button on each slider to unlock the frame.
- Push inward until the frame is fully closed.
- Slide the carry bag over the closed frame and close the zipper on carry bag.
References
[xyz-ips snippet=”download-snippet”]