V-TAC VT-873 Surface Mounted GU10 Fittings Instruction Manual
TECHNICAL DATA:
INSTALLATION DIAGRAM:
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
INSTALLATION INSTRUCTION
- Switch off the power.
- Ensure that the void depth is minimum 90mm and the thickness of the ceiling is maximum 20mm. (Pic 1)
- Drill the appropriate hole on the ceiling as per the cut-out size. (Pic 2)
- Put the LED bulb into the fixture. (Pic 3)
- Connect the power 220-240V. (Picture 4)
- Holding the spring clip upwards and put the fixture into the hole and ensure the fixture are installed properly. (Pic 5)
- Adjust the angle. Switch on the power if above steps are done properly with no mistakes.
In case of any query/issue with the product, please reach out to us at: [email protected]For More products range, inquiry please contact our distributor or nearest dealers. V-TAC EUROPE LTDBulgaria, Plovdiv 4000, bul.L.Karavelow 9B
References
[xyz-ips snippet=”download-snippet”]