Homech HM-HF008 Inflatable Stand Up Paddle Board User Manual

www.homech.netInflatable StandUp PaddleBoardHM-HF008

User Manual

THANK YOU FOR CHOOSING HOME INFLATABLE STAND-UP PADDLE (SUP) BOARD. BE SAFE AND HAVE FUN!

IMPORTANT SAFETY INSTRUCTIONS

Familiarize yourself with the features and ask for professional training if you are inexperienced in handling this type of board. For your full enjoyment, it is important tofollow proper safety procedures and rules of the waterway that apply to all SUPs.

Always wear a Coast Guard approved Personal Flotation Device (PFD).
Never go boarding in severe conditions. Beware of offshore winds and currents.
DO NOT leave the board exposed to direct sunlight for extended periods of time.

WARNING

  • Keep away from fire.
  • DO NOT use around sharp objects.
  • Never allow minors to use without adult supervision.
  • DO NOT paddle the board while impaired or under the influence of intoxicants such as alcohol or drugs.
  • DO NOT use the board for anything other than its intended use.
  • Always exercise safe boarding and do not attempt actions that are beyond your skills or ability.
  • Never paddle the board after sunset, before dawn, or at any time in poor lighting.
  • Before every use, carefully check for any sign of wear or leakage to ensure the SUP is in good condition. DO NOT use if any damage is found.
  • DO NOT use a high-pressure air pump to inflate. Inflate according to the rated pressure orit will cause over inflation and/or an explosion.
  • Check your local regulations to familiarize yourself with any rules or regulations that may apply to water sports and watercraft.
  • We recommend that you always paddle with a partner -it’s safer and more fun!READ AND SAVE THESE INSTRUCTIONS

KNOWING YOUR SUP BOARD

Unpack and check that all accessories are inside.

GETTING STARTED

Dual Action Hand Pump

Use of Pump

Inflating the SUP Board

Installing the Fin

Assembling the Paddle

Attaching the Safety Leash For your own safety when paddling, remember to attach the safety leash to the front D-Ring and fasten to your ankle.

Repairing Leaks & Tears

Leaking Valve Screw tight with valve wrench.

Tears (< 10 mm)

  1. Deflate completely.
  2. Locate the leak. Clean and dry.
  3. Cut a suitable size.
  4. Apply glue to the plain side, wait for 1 minute.
  5. Attach over the tear and hold for 2 minutes.
  6. Wait 48 hours before re-inflating

STORAGE AND MAINTENANCE

For storage, you may roll up the board and store it with all accessories in the included backpack.

Disassembling the Fin

Deflating the SUP Board

TROUBLE-SHOOTING

The following troubleshooting guide addresses the most common problems. If problems persist, feel free to contact our Customer Support at [email protected].

Which direction should be the “Homech” logo face when paddling? It is easier to paddle with the logo facing towards the front of the board. This allows the water to slip more easily past the blade as it moves through the water.

 
Can I keep my board inflated? If you choose to leave the board in direct sunlight for an extended period of time it is recommended that you deflate the board to prevent over-expansion as this is not covered under the warranty.

 
Winter is here, how do you suggest I store my board? We recommend storing it completely dry, rolled up in the bag, stored in a location away from the elements such as a garage or shed.
How should I clean my board? Soapy water should do the trick! We also like to use mineral spirits for those tougher stains.
Do I have to wear a lifejacket? The US Coast Guard requires a PFD to be onboard your paddleboard since it is considered a vessel.

WARRANTY AND SERVICE

Thanks for choosing Homech SUP Board. This product is covered with Homech product and labor warranty for 12 months from the date of its original purchase.We can only provide after-sales service for products that are sold by Homech or Homech authorized retailers and distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty issues.

NORTH AMERICAE-mail: [email protected](US)[email protected](CA)

MANUFACTURERManufacturer: Shenzhen NearbyExpress Technology Development Co., Ltd.Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,