BHE-106 6 in. Extension Arm with Spigot for Super Clamp INSTRUCTIONS
Thank you for choosing Impact.
Thank you for choosing the Impact BHE-106 6 in. Extension Arm with Spigot for Super Clamp. This extension arm features a baby (5/8 inch) receiver and comes with a double-ended 5/8-inch spigot, which has a 1/4-20 and 3/8-16 threaded post on either side. The extension arm mounts to a super clamp, so you can mount a camera, lighting fixture, or light modifier to it.
Precautions 
- Please read and follow these instructions, and keep this manual in a safe place.
- Handle the unit with care.
- Clean the unit with a soft, dry cloth.
- Keep this unit away from children.
- Make sure everything is secure before proceeding.
- Make sure the item is intact and that there are no missing parts.
- Do not exceed the maximum load capacity.
- Use caution when mounting a product at the maximum load capacity.
- All photos are for illustrative purposes only.
Specifications
| Spigot size | 5/8 in. |
| Receiver size | 5/8 in. |
| Thread size | 1/4-20 and 3/8-16 |
| Maximum load capacity | 8 lb.13.6 kg) |
Recommended Accessories
- Impact BHE-108 Flex Arm for Super Clamps
- Impact BHE-102 Heavy Duty Flex Arm for Super Clamps
- Impact SRP-107 4.7 in. Snap-in Pin for Super Clamps
- Impact FB-230L Compact Flash Bracket with Two Locking Shoes
- Impact BHE-104 Camera Bracket Platform for Holding Arms
- Impact BHE-107 Two-Section Articulated Arm
Visit our website at www.ImpactStudioLighting.com for more Impact accessories.
One-Year Limited Warranty
This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation, or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Impact along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group. www.gradusgroup.comImpact is a registered trademark of the Gradus Group.© 2020 Gradus Group LLC. All Rights Reserved.
GG3
References
[xyz-ips snippet=”download-snippet”]