eurolite LED Laser Derby MK2 User Manual

eurolite LED Laser Derby MK2 User Manual

DANGER! Electric shock caused by short-circuitBe careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock when touching the wires. Never open the housing. Keep the device away from rain and moisture

Please read these instructions carefully before using the product. They contain important information for the correct use of the product.Every person involved with the installation, operation and maintenance of this device has to

  • be qualified
  • follow the instructions of this manual
  • consider this manual to be part of the total product
  • keep this manual for the entire service life of the product
  • pass this manual on to every further owner or user of the product
  • download the latest version of the user manual from the Interne

INTRODUCTION

Thank you for having chosen one of our products. If you follow the instructions given in this manual, we are sure that you will enjoy this device for a long period of time.

Product features

DMX light effect with RG laser (2M), rotating LED derby, stroboscope and IR remote control

  • Four high-power 10 W LEDs in red, green, blue and white for dynamic mirror ball effects
  • 16 cold white 0.6 W SMD LEDs for fast, dynamic strobe effects
  • 2 laser diodes project thousands of red and green laser beams
  • Laser class 2M: does not require additional protective measures or appointment of a laser safety officer
  • Auto, music, master/slave and DMX mode
  • built-in auto and music show programs
  • RGBW color effects, dimmer and strobe effects
  • Rotation speed variably adjustable
  • Sound-control via built-in microphone with adjustable microphone sensitivity
  • DMX512 control possible via any commercial DMX controller
  • 2,4,5,6,7,8 or 9 DMX channels selectable for various applications
  • Supports QuickDMX – the wireless DMX system from Eurolite
  • Built-in phantom-powered USB port for QuickDMX receivers (accessory)
  • Addressing and setting via control panel with 4-digit LED display
  • Convenient wireless control via included IR remote control EUROLITE IR-16
  • Feed-through output allows to power up to 8 devices

SAFETY INSTRUCTIONS

WARNING!Please read the safety warnings carefully and only use the product as describe in this manual to avoid accidental injury or damage.

Intended use

  • This device is an LED laser projector for creating decorative lighting effects. This device is designed for professional use in the field of event technology, e.g. on stage. It is not suitable for household lighting.
  • Only use the device according to the instructions given herein. Damages due to failure to follow these operating instructions will void the warranty! We do not assume any liability for any resulting damage.
  • We do not assume any liability for material and personal damage caused by improper use or noncompliance with the safety instructions. In such cases, the warranty/guarantee will be null and void.
  • Unauthorized rebuilds or modifications of the device are not permitted for reasons of safety and render the warranty invalid.

Danger due to electricity

  • The device is suitable for indoor use only. Do not use it outdoors. Never expose it to rain or moisture. Do not store it in rooms exposed to moisture.
  • To reduce the risk of electric shock, do not open any part of the device. There are no serviceable parts inside the device.
  • Only connect the device to a properly installed mains outlet. The outlet must be protected by residual current breaker (RCD). The voltage and frequency must exactly be the same as stated on the device. If the mains cable is equipped with an earthing contact, then it must be connected to an outlet with a protective ground. Never defeat the protective ground of a mains cable. Failure to do so could result in damage to the device and possibly injure the user.
  • The mains outlet must be easily accessible so that you can unplug the device quickly if need be.
  • Never touch the mains plug with wet or damp hands. There is the risk of potentially fatal electric shock.
  • The mains cable must not be bent or squeezed. Keep it away from hot surfaces or sharp edges.
  • Never pull the mains cable to disconnect the mains plug from the mains outlet, always seize the plug.
  • Unplug the device during lighting storms, when unused for long periods of time or before cleaning.
  • Do not expose the device to any high temperatures, direct sunlight, dripping or splashing water, strong vibrations or heavy mechanical stress.
  • Do not place any objects filled with liquids on the device.
  • Do not place any open sources of fire, such as burning candles, on or directly next to the device.
  • Make sure that objects cannot fall into the device, in particular metal parts.
  • Only have repairs to the device or its mains cable carried out by qualified service personnel. Repairs are required when the device or the mains cable is visibly damaged, liquid has been spilled or objects have fallen into the device; when the device has been exposed to rain or moisture, has been dropped or malfunctions occur.
  • Cleaning of the device is limited to the surface. Make sure that moisture does not come into contact with any areas of the terminal connections or mains voltage control parts. Only wipe off the product with a soft lint-free and moistened cloth. Never use solvents or aggressive detergents.

Danger to children and people with restricted abilities

  • This product is not a toy. Keep it out of the reach of children and pets. Do not leave packaging material lying around carelessly. Never leave this device running unattended.
  • This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.

Warning – risk of burns and fire

  • The admissible ambient temperature range (Ta) is -5 to +45°C. Do not operate the device outside of this temperature range.
  • The housing temperature (Tc) can be up to 65°C during use. Avoid contact by persons and materials.
  • Do not illuminate surfaces within 1.0 m of the device. This value is indicated on the device by the symbol.
  • Do not use the device near highly flammable materials. Always place the device at a location where sufficient air circulation is ensured. Leave 50 cm of free space around the device. Never cover the air vents of the housing.

Warning – risk of injuries

  • Do not look directly at the light source. Persons with light-sensitive epilepsy may suffer from epileptic seizures or fall unconscious.
  • Make sure that the product is set up or installed safely and expertly and prevented from falling down. Comply with the standards and rules that apply in your country, in particular EN 60598-2-17.
  • If you lack the qualification, do not attempt the installation yourself, but instead use a professional installer. Improper installation can result in bodily injury and or damage to property.
  • The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safetyprecautions.
  • For overhead use, always secure the device with a secondary safety attachment such as a safety bond or safety net.
  • Make sure that the area below the installation place is blocked when rigging, derigging or servicing the device.
  • For commercial use the country-specific accident prevention regulations of the government safety organization for electrical facilities must be complied with at all times.

Caution – material damage

  • This device must not be connected to the mains voltage by means of a dimmer.
  • Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects.
  • Never switch the device on and off at short intervals. This will considerably reduce the service life of the device.
  • If the device has been exposed to drastic temperature fluctuation, do not switch it on immediately. The resulting condensation may destroy the device. Allow the device to reach room temperature before connecting it. Wait until the condensation has evaporated.
  • Please use the original packaging to protect the device against vibration, dust and moisture during transportation or storage.
  • If a serial number label is affixed to the device, do not remove the label as this would make the guarantee void.

About batteries

  • Do not try to short-circuit, recharge, disassemble or heat batteries (danger of explosion!).
  • Remove the batteries if the device is not used for a longer period of time.
  • Damaged/leaking batteries may cause harm to your skin use safety gloves.

Important information for laser products

DANGER!Avoid direct eye exposure. Never view directly with optical instruments (e.g. magnifying lens or telescope). Laser radiation can cause eye damage and/or skin damage. All protective measures for a safe operation of this laser must be applied.

Safety measures which must be observed

  • This device includes a class 2M laser according to the EN 60825-1. The accessible laser radiation is exclusively within the visible spectral range (400 nm to 700 nm). However, a short-term exposure (max. 0.25 seconds) is not hazardous to the eye. A longer exposure is prevented by the natural eyelid closing reflex. Nevertheless, close your eyes or turn away immediately if the laser beam hits the eye. The corresponding warning is attached to the housing.
  • The operator must comply with the country-specific accident prevention regulations of the government safety organization for electrical facilities.
  • The corresponding accident prevention regulation of the accident prevention and insurance association in Germany is BGV-B2.
  • This product must only be mounted, commissioned and operated by suitably qualified specialist personnel and only under observance of the requirements stated in the operating instructions.
  • The use of operating and adjustment equipment and procedures other than those indicated here can lead to dangerous exposure to radiation.
  • Do not stare into the laser beam and do not aim the laser at another person or animals. Laser radiation may result in injuries to the eyes or skin.
  • Do not look into the laser beam with optical instruments (e.g. magnifying glasses or binoculars) under any circumstances. Laser radiation can cause eye damage and/or skin damage.
  • Do not point the laser beam at mirrors or other reflective surfaces. The uncontrolled, reflected beam may strike people or animals.
  • Always set up and install the unit so that a minimum distance of 1 m is kept between the laser light and the audience.
  • Mark the area where this laser equipment is used by means of barriers and warning signs etc.
  • Caution laser diode! Do not open or modify the unit. A modification can result in a more hazardous laser radiation which considerably deviates from the specified values.

DESCRIPTION OF THE DEVICE

Front

  1. Fixation screw
  2. Mounting bracket
  3. Fan
  4. RGBW LEDs
  5. SMD LEDs
  6. Laser output aperture
  7. Infrared sensor for the remote controlRear
  8. Safety eyelet
  9. Microphone
  10. Rotary control for sensitivity
  11. Indicator for DMX mode
  12. Indicator for automatic mode
  13. Display with operating buttons
  14. Indicator for slave mode
  15. Indicator for sound control mode
  16. DMX output
  17. DMX input
  18. QuickDMX USB port
  19. Power feed-through output
  20. Power input
  21. Fuse holder

INSTALLATION

WARNING! Risk of injury caused by falling objects Devices in overhead installations may cause severe injuries when crashing down. Make sure that the device is installed securely and cannot fall down. The installation must be carried out by a specialist who is familiar with the hazards and the relevant regulations.

DANGER! Damage caused by laser radiation Observe the chapter safety instructions when installing the device.

The device may be placed on the floor or fastened to a truss or similar rigging structure. The device must never be fixed swinging freely in the room.

  1. The rigging structure must support at least 10 times the weight of all fixtures to be installed on it.
  2. Block access below the work area and work from a stable platform when installing the device.
  3. Use rigging hardware that is compatible with the structure and capable of bearing the weight of the device. Please refer to the “Accessories” section for a list of suitable rigging hardware.
  4. Secure the device with a safety bond or other secondary attachment. This secondary safety attachment must be sufficiently dimensioned in accordance with the latest industrial safety regulations and constructed in a way that no part of the installation can fall down if the main attachment fails. An appropriate eyelet is mounted on the device for fixation of the safety bond. Fasten the safety bond in such a way that, in the event of a fall, the maximum drop distance of the device will not exceed 20 cm.
  5. To align the device, release the fixation screws at the mounting bracket, adjust the desired inclination angle and tighten the fixation screws.
  6. After installation, the device requires inspections periodically to prevent the possibility of corrosion, deformation and looseness.

CONNECTIONS

DMX512 controlA DMX512 data link is required in order to control the device via DMX. The device provides 3-pin XLR connectors for DMX connection.Connect the output of your DMX controller to the DMX input DMX IN of the light set with a DMX cable.Connect the DMX output DMX OUT of the light set to the DMX input of the next unit in the chain. Always connect one output to the input of the next unit until all units are connected.At the last unit, the DMX cable has to be terminated. Plug the terminator with a 120 Ω resistor between Signal (–) and Signal (+) in the DMX output of the last unit.If the cable length exceeds 300 m or the number of DMX devices is greater than 32, it is recommended to insert a DMX level amplifier to ensure proper data transmission.

XLR connection

DMX-Output: XLR Mountiing-socket

  1. Ground
  2. Signal (-)
  3. Signal (+)

DMX-input: XLR Mountiing-plug

  1. Ground
  2. Signal (-)
  3. Signal (+)

Wireless DMX transmission with QuickDMXThe device features an alternative DMX input for a QuickDMX receiver (sold separately). This connector allows for wireless transmission of DMX control signals to the device. The connector is designed as a USB port which provides the required 5 V operating voltage for the  receiver. With QuickDMX devices, extensive cabling between the DMX controller and the device is not required.Occupation of the USB port:

Connection to the mainsThe device uses an auto-range power supply that accepts input voltages between 100 und 240 volts.

  1. Connect the device via the mains cable to a grounded mains socket. Thus the unit is switched on.
  2. To switch off the unit, disconnect the power plug.
  3. Do not connect the unit to the mains voltage via a dimmer. For a more convenient operation, use a mains outlet which is switchable.

Power supply of further devicesThe jack POWER OUT allows for power supply of further devices. To interconnect several devices, connect the jack POWER OUT to the input POWER IN of the next unit until all units are connected. Matching power cables with IEC plugs are available as accessories. In this manner, up to 8 devices can be linked at 230/240 input voltage and up to 4 devices at 110/115 input voltag

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating mode. The operating modes can be selected by means of the display and the control buttons. All settings remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone mode via the control board and the EUROLITE IR-16 remote control or in DMX-controlled mode via any commercial DMX controller.Microphone sensitivity in Stand Alone mode can be adjusted via the rotary dial.

Operating buttons

MENU: Selects the operating mode or returns to the initial screenENTER: Activates a value to be modified or saves a value when modifyingUP: Selects the next menu item or increases values when modifyingDOWN: Selects the previous menu item or decreases values when modifying

Menu structure

Display

Function
 

 

 

 

 

AUT

   Auto programs (Master mode)
Aut1 Derby + Strobe + Laser
Aut2 Derby + Strobe
Aut3 Derby + Laser
Aut4 Strobe + Laser
Aut5 Derby
Aut6 Strobe
Aut7 Laser
S.01-S.99 Speed (increasing)
 

 

 

 

 

SOU

  

Sound controlled programs (Master mode)
Sou1 Derby + Strobe + Laser
Sou2 Derby + Strobe
Sou3 Derby + Laser
Sou4 Strobe + Laser
Sou5 Derby
Sou6 Strobe
Sou7 Laser
 

 

 

COL

  

 

 

COLO

 rXXX r000 ~ 255 Intensity setting of the red LED (0 – 100%)
GXXX G000 ~ G255 Intensity setting of the green LED (0 – 100%)
BXXX B000 ~ B255 Intensity setting of the blue LED (0 – 100%)
WXXX W000 ~ W255 Intensity setting of the white LED (0 – 100%)
FXXX F0 ~ F99 Derby strobe effect, increasing speed
 

 

 

DMX

  

Setting DMX channel mode DMX address setting
 

 

dXXX

 2CH

4CH

5CH

6CH

7CH

8CH

9CH

 d 001-d 511

d 001-d 509

d 001-d 508

d 001-d 507

d 001-d 506

d 001-d 505

d 001-d 504

 2-Channel DMX Mode

4-Channel DMX Mode 5-Channel DMX Mode 6-Channel DMX Mode 7-Channel DMX Mode 8-Channel DMX Mode

9-Channel DMX Mode
SLA Slav Setting for the Slave device
 

 

SYS

 LEDS * ON OFF Display energy saving mode on Display energy saving mode off
TEST YES NO Automatic function check
REST YES

NO

 Restore factory default

 

* = When ON, the display shows a dot after 30 seconds of inactivity

Interconnecting several devices (master/slave operation)

Several devices may be interconnected (max. 32). Then all slave units can be synchronized and controlledwith the master unit without the need for a DMX controller. The devices must be set to the correspondingoperating modes.

  1. Configure all slave units before connecting the master unit: Press the MENU button so many times until SLAV is indicated on the display. Confirm with the ENTER button.
  2. Connect the DMX output of the master unit to the DMX input of the first slave unit. Then connect the DMX output of the first slave unit to the DMX input of the second slave unit, etc. until all units have been connected in a chain. Make sure the master unit is the first in the chain. Do not connect a DMX controller to the DMX input of the master unit.
  3. Set the master unit to the desired operating mode. The interconnected devices will now operate synchronously.

Remote control IR-16The IR remote control allows convenient control of the integrated show programs in automatic mode or sound-controlled mode. Press the buttons repeatedly to switch between the programs. The display indicates the current setting. When actuating a button, always hold the remote control in the direction of the sensor at the control unit’s front or rear. There must be visual connection between the remote control and the sensor.Note: Operation via IR remote control not possible in DMX or slave mode

Button

 Function

On/off

Auto mode: see graphic for programs 1 – 7*
Sound control: see graphic for programs 1 – 7*

Pause

Derby change of colors

Derby change of colors

Derby LED effect

Strobe effect
Laser effect
 

Program speed adjustment in Auto mode: 0 is lowest, 9 is highest
Switches between Auto mode and Sound control in A, B or C mode.

No function

Note: Buttons A, B and C can be played together if an effect combination is desired

Auto mode and sound-controlled mode always start with program 1.If, for example, no strobe is desired, press the B button to switch off the strobe effect. The menu jumps to program 3 in the display and is played back in that way.Or, if no derby is desired, press the A button to switch off the derby effect. The menu jumps to program 4 in the display and is played back in this way.

Program 1 Derby + Strobe + Laser
Program 2 Derby + Strobe
Program 3 Derby + Laser
Program 4 Strobe + Laser
Program 5 Derby
Program 6 Strobe
Program 7 Laser

Notes:

  • The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery contacts prevents the battery from being discharged during storage. Prior to the first operation remove the foil from the battery support on the rear side of the remote control. Otherwise operation of the remote control is not possible.
  • If the range of the remote control decreases, replace the battery. For this purpose, on the rear side of the remote control press the small bar with the groove to the right and at the same time remove the battery support. For operation, one 3 V button cell type CR 2025 is required. When inserting, pay attention that the positive pole of the button cell shows upwards in the support.
  • Remove the battery from the remote control as a precaution if the device is not used for a longer period of time.

DMX operationSetting the number of DMX channels and the DMX starting addressFor operation with a controller with DMX512 protocol, the device is equipped with max. 9 control channels.However, it can also be switched to a mode with 2, 4, 5, 6, 7 or 8 channels if different functions are required.To be able to operate the device with a DMX controller, the DMX starting address must be set. The startingaddress depends upon which DMX controller is being used. Please refer to the controller’s documentation.

  1. Press the MENU button so many times until DMX appears on the display. Confirm with the ENTER button. The display next shows dXXX, please confirm again with ENTER.
  2. The display then indicates 2 CH (2 DMX channels), 4 CH (4 DMX channels), 5 CH (5 DMX channels), 6CH (6 DMX channels), 7 CH (7 DMX channels), 8 CH (8 DMX channels) or 9 CH (9 DMX channels).Use the buttons UP and DOWN to select the desired DMX channel mode. Confirm with the ENTERbutton.
  3. For the DMX start address press the MENU button until dXXX is shown on the display. Use the buttons UP and DOWN to set the address. Confirm with the ENTER button.
  4. The red LED next to the display will blink when DMX signals are being received. If no control signals are available, the red LED next to the display will not blink.

Note: Please make sure that you do not have any overlapping channels in order to control each device correctly and independently from any other fixture on the DMX chain. If several devices are addressed similarly, they will work synchronically.

Functions in DMX mode

2-Channel-Mode

Channel

 Value Function
 

 

1 Auto programs

 

Sound control- programs

 000 – 009

No Function

010 – 044

 Derby + Strobe + Laser
045 – 079

Derby + Strobe

080 – 114

 Derby + Laser

115 – 149

 Strobe + Laser
150 – 184

Derby

185 – 219

Strobe
220 – 255

Laser

2

Speed / Sound control

 000 – 250 Increasing speed of the Auto programs
 

251 – 255

Sound control mode

4-Channel-Mode

Channel

 Value

Function
 

 

 

 

 

 

 

1

Derby color presets

000 – 005

 No Function

006 – 020

 Red
021 – 035

Green

036 – 050

 Blue
051 – 065

White
066 – 080

Red/Greed

081 – 095

 Red/Blue

096 – 110

 Red/White
111 – 125

Green/Blue

126 – 140

 Green/White
141 – 155

Blue/White

156 – 170

Red/Green/Blue
171 – 185

Red/Green/White

186 – 200

 Green/Blue/White

201 – 215

 Red/Green/Blue/White
216 – 230

Automatic 4 color chase
231 – 255

Automatic 14 color preset combination chase
 

2

Derby Motor Rotation

000

 No function

001 – 127

Indexing
128 – 255

Increasing speed
 

 

 

3

Laser

000 – 009

 No function

010 – 049

 Red
050 – 089

Green

090 – 129

 Red and green
130 – 169

Red on green strobe

170 – 209

Green on red strobe
210 – 255

Red and green strobe alternate
 

 

 

 

 

 

 

 

 

 

4

Strobe

000 – 009

 No function

010 – 023

 Strobe program 1
024 – 036

Strobe program 2

037 – 049

 Strobe program 3
050 – 062

Strobe program 4

063 – 075

 Strobe program 5
076 – 088

Strobe program 6

089 – 101

 Strobe program 7
102 – 114

Strobe program 8
115 – 127

Strobe program 9

128 – 140

 Strobe program 10

141 – 153

 Strobe program 11
154 – 166

Strobe program 12

167 – 179

 Strobe program 13
180 – 192

Strobe program 14
193 – 205

Strobe program 15

206 – 218

 Strobe program 16

219 – 231

 Strobe program 17
232 – 244

Strobe program 18
245 – 255

Sound control strobe

5-Channel-Mode

Channel

 Value

Function
 

 

 

 

 

 

 

1

Derby color presets

000 – 005

 No Function
006 – 020

Red

021 – 035

 Green
036 – 050

Blue

051 – 065

 White
066 – 080

Red/Greed

081 – 095

 Red/Blue
096 – 110

Red/White

111 – 125

 Green/Blue
126 – 140

Green/White

141 – 155

 Blue/White
156 – 170

Red/Green/Blue

171 – 185

 Red/Green/White
186 – 200

Green/Blue/White
201 – 215

Red/Green/Blue/White

216 – 230

 Automatic 4 color chase
231 – 255

Automatic 14 color preset combination chase
 

2

Derby Motor Rotation

000

 No function

001 – 127

Indexing
128 – 255

Increasing speed
 

 

 

3

Laser

000 – 009

 No function

010 – 049

Red
050 – 089

Green

090 – 129

 Red and green

130 – 169

Red on green strobe
170 – 209

Green on red strobe

210 – 255

Red and green strobe alternate
 

 

 

 

 

 

 

 

 

4

Strobe

000 – 009

 No function
010 – 023

Strobe program 1

024 – 036

 Strobe program 2
037 – 049

Strobe program 3

050 – 062

 Strobe program 4
063 – 075

Strobe program 5

076 – 088

 Strobe program 6
089 – 101

Strobe program 7

102 – 114

 Strobe program 8
115 – 127

Strobe program 9

128 – 140

 Strobe program 10
141 – 153

Strobe program 11

154 – 166

 Strobe program 12
167 – 179

Strobe program 13

180 – 192

 Strobe program 14
193 – 205

Strobe program 15

206 – 218

 Strobe program 16
219 – 231

Strobe program 17

232 – 244

 Strobe program 18
245 – 255

Sound control strobe

5

Derby Strobe

000 – 005

 No function
006 – 255

Strobe frequency with increasing speed

 

6-Channel-Mode

Channel

 Value

Function
 

 

 

 

 

 

 

1

Derby color presets

 000 – 005 No Function
006 – 020 Red
021 – 035 Green
036 – 050 Blue
051 – 065 White
066 – 080 Red/Greed
081 – 095 Red/Blue
096 – 110 Red/White
111 – 125 Green/Blue
126 – 140 Green/White
141 – 155 Blue/White
156 – 170 Red/Green/Blue
171 – 185 Red/Green/White
186 – 200 Green/Blue/White
201 – 215 Red/Green/Blue/White
216 – 230 Automatic 4 color chase
231 – 255 Automatic 14 color preset combination chase
 

2

Derby Motor Rotation

 000 No function
001 – 127 Indexing
128 – 255 Increasing speed
 

 

 

3

Laser

 000 – 009 No function
010 – 049 Red
050 – 089 Green
090 – 129 Red and green
130 – 169 Red on green strobe
170 – 209 Green on red strobe
210 – 255 Red and green strobe alternate
 

 

 

 

 

 

 

 

 

4

Strobe

 000 – 009 No function
010 – 023 Strobe program 1
024 – 036 Strobe program 2
037 – 049 Strobe program 3
050 – 062 Strobe program 4
063 – 075 Strobe program 5
076 – 088 Strobe program 6
089 – 101 Strobe program 7
102 – 114 Strobe program 8
115 – 127 Strobe program 9
128 – 140 Strobe program 10
141 – 153 Strobe program 11
154 – 166 Strobe program 12
167 – 179 Strobe program 13
180 – 192 Strobe program 14
193 – 205 Strobe program 15
206 – 218 Strobe program 16
219 – 231 Strobe program 17
232 – 244 Strobe program 18
245 – 255 Sound control strobe
5

Derby Auto Programs

 000 – 009 No function
010 – 255 Auto programs
6

Speed / Sound Control For Channel 5

 000 – 009 No function
010 – 250 Increasing speed of the Auto Programs
251 – 255 Sound control

7-Channel-Mode

Channel

 Value

Function

1

Derby Red

 000 No function
001 – 255

Brightness 0 – 100 %

2

Derby Green

 000 No function
001 – 255

Brightness 0 – 100 %

3

Derby Blue

 000 No function
001 – 255

Brightness 0 – 100 %

4

Derby White

 000 No function
001 – 255

Brightness 0 – 100 %

5

Derby Motor Rotation

 000 No function
001 – 255

Rotation with increasing speed

6

Laser

 000 – 009 No function
010 – 255

Laser Auto programs

 

7

Strobe

 000 – 009 No function
010 – 250

Strobe programs
251 – 255

Sound control strobe

8-Channel-Mode

Channel

 Value Function
1

Derby Red

 000

No function

001 – 255

 Brightness 0 – 100 %

2

Derby Green

 000 No function
001 – 255

Brightness 0 – 100 %

3

Derby Blue

 000 No function
001 – 255

Brightness 0 – 100 %

4

Derby White

 000 No function
001 – 255

Brightness 0 – 100 %

5

Derby Motor Rotation

 000 No function
001 – 255

Rotation with increasing speed

6

Laser

 000 – 009 No function
010 – 255

Laser Auto programs
 

7

Strobe

 000 – 009 No function

010 – 250

Strobe programs
251 – 255

Sound control strobe
8

Derby Strobe

 000 – 005 No function
006 – 255

Strobe frequency with increasing speed

9-Channel-Mode

Channel

 Value Function

1

Derby Red

 000 No function
001 – 255

Brightness 0 – 100 %
2

Derby Green

 000

No function

001 – 255

Brightness 0 – 100 %
3

Derby Blue

000

 No function
001 – 255

Brightness 0 – 100 %
4

Derby White

000

 No function
001 – 255

Brightness 0 – 100 %
5

Derby Motor Rotation

 000 No function
001 – 255 Rotation with increasing speed
6

Laser Red

 000 – 009 No function
010 – 255 Laser auto programs
7

Laser Green

 000 – 009 No function
010 – 255 Laser auto programs
 

8

Laser Motor Rotation

 000 – 004 No function
005 – 127 Forward rotation with increasing speed
128 – 133 Stop
134 – 255 Backward rotation with increasing speed
 

9

Strobe

 000 – 009 No function
010 – 250 Strobe programs
251 – 255 Sound control strobe

CLEANING AND MAINTENANCE

The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The lenses, in particular, should be clean to ensure that light will be emitted at maximum brightness.

  1. Disconnect the device from power and allow it to cool before cleaning.
  2. Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may damage the surface. Make sure that no liquids can enter the device. 3 The device must be dry before reapplying power.

There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as this may result in damage. Maintenance and service operations are only to be carried out by authorized dealers. Should you need any spare parts, please use genuine parts. Should you have further questions, please contact your dealer.

Replacing the fuseIf the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.

  1. Disconnect the device from power and allow it to cool.
  2. Open the fuse holder of the mains connection with a fitting screwdriver.
  3. Remove the old fuse from the fuse holder and replace it with a new fuse.
  4. Carefully push the fuse holder back into its position before reapplying power

PROTECTING THE ENVIRONMENT

Disposal of old equipmentWhen to be definitively put out of operation, take the product to a local recycling plant for a disposal which is not harmful to the environment. Devices marked with this symbol must not be disposed of as household waste. Contact your retailer or local authorities for more information. Remove any inserted batteries and dispose of them separately from the product.You as the end user are required by law (Battery Ordinance) to return all used batteries/ rechargeable batteries. Disposing of them in the household waste is prohibited. You may return your used batteries free of charge to collection points in your municipality and anywhere where batteries/rechargeable batteries are sold. By disposing of used devices and batteries correctly, you contribute to the protection of the environment.

TECHNICAL SPECIFICATIONS

Power supply: 100-240 V AC, 50/60 Hz
Power consumption: 60 W
IP classification: IP20
Protection class: Class I
Power connection: Mains input IEC (M) Power supply cord with safety plug
Power output: IEC connector (F) mounting version Bypass
Power cable construction / length: 3 x 0.75 mm² H05VV-F / 1.5 m
Fuse: 5 x 20 mm, T 1.6 A Fuse replaceable
Lamp type: LED lamp
LED: Strobe effect 16 x SMD 2835 0.6 W CW
Multi beam effect 4 x SMD 5050 10 W RGBW
DMX channels: 2; 4; 5; 6; 8; 7; 9
DMX input: 1 x 3-pin XLR (M) mounting version
DMX output: 1 x 3-pin XLR (F) mounting version
Cooling: Cooling fan
 

Control:

 IR remote control; Stand-alone; DMX; Master/slave function; Sound to light via Microphone; QuickDMX via

USB (optional)
Housing color: Black
Attachment system: Mounting bracket
Display type: Monochrome 4 digits 7-segment LED display
Control elements: Navigation keys, sensitivity rotary dial
Status LED: DMX mode, slave mode, auto mode, sound mode
 

Connections:

 Input: 1 x DMX via 3-pin XLR (M) mounting version
Input: 1 x DMX via USB A (F) mounting version
Output: 1 x DMX via 3-pin XLR (F) mounting version
 

Dimension:

 Width: 26 cm
Depth: 19 cm
Height: 19 cm
Weight: 2.30 kg
Laser  
Laser class: Class 2M
Laser color: RG
Laser module: G green 35 mW 515 nm
R red 100 mW 650nm
Remote control  
Battery: 1 x Button cell 3.0 V CR2025 lithium manganese

All information is subject to change without prior notice. © 18.05.2021

Accessories

EUROLITE TPC-10 Coupler, silver No. 59006856
EUROLITE Safety Bond A 3x600mm up to 5kg, silver No. 58010310
EUROLITE DMX cable XLR 3pin 3m black No. 3022785H
PSSO DMX cable XLR 3pin 3m black Neutrik No. 30227810
OMNITRONIC IEC Extension 3×1.0 3m black No. 30235201
EUROLITE QuickDMX USB Wireless Transmitter/Receiver No. 70064704
EUROLITE QuickDMX Wireless Transmitter/Receiver No. 70064703

report this ad

Eurolite is a brand of Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5 97297 Waldbüttelbrunn GermanyD00132332 Version 1.0 Publ. 18/05/2021

 

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , , ,