Paintball 10 Rules for Safe Play User Guide

Table of Contents

Paintball 10 Rules for Safe Play 
User Guide

WARNINGS

FOLLOW THESE 10 RULES FOR SAFE PLAY

WARNING- Failure to follow these instructions or failure to follow all these warnings may result in serious or permanent injury, including blindness.
WARNING- Never remove your goggles while on a paintball playing field.
WARNING- Always wear your goggles whenever shooting a paintball marker (gun), or whenever in or near an area where paint markers (guns) are being shot by others.
WARNING- All paintball markers (guns) must be chronographed (measured for speed). Do not play with these JT goggles or any goggles if the speed of paintball markers (guns) exceeds 300 feet per second (90 meters per second). Observe at all times the rules of safe play and safe paintball marker (gun) handling.
WARNING- Always wear the entire JT goggle system, which includes face and ear protection. A goggle strap alone is not an ear protector.
WARNING Check your goggle lens before and after each usage. Replace the lens immediately with a new JT lens if any cracks are observed anywhere in the lens.
WARNING Replace the lens immediately if the lens is subjected to a direct impact from a paintball from a distance of less than 10 feet.
WARNING Replace the lens after it has been in use for one year.
WARNING Fogging may occur. Never remove your goggles during play even if fogging occurs.
WARNING- Only .68 caliber paintballs that comply with ASTM F1979 should be used with this goggle system. Goggles are for Paintball activities only and not for industrial use.

NEVER REMOVE YOUR GOGGLES IN AN ACTIVE PAINTBALL AREA.

NEVER take off or lift the JT GOGGLE / MASK system from your face for any reason while you are in an active paintball area – even if you’re not playing! If you take the goggle / mask system off your face, it cannot protect you! Always use a barrel plug in your gun when not in use.
ALWAYS follow all cleaning and user instructions exactly. Improper use or maintenance of the JT GOGGLE / MASK system may result in serious eye injury or blindness.
Do not play or use JT GOGGLES if paintball velocities exceed 300 feet per second.
ALWAYS check each lens to be sure the lens is locked firmly into place before every game you play.
ALWAYS check each lens for damage before every game you play.
IMMEDIATELY replace any lens that is hit within ten (10) feet or less even if you can’t see damage.
ALWAYS replace each lens at least once per year.

Lens Care Instructions

DEPOSIT ! READ AND FOLLOW THESE INSTRUCTIONS EXACTLY FOR ALL CARE AND CLEANING OF JT PAINTBALL GOGGLE LENSES! IF YOU DO NOT UNDERSTAND THESE INSTRUCTIONS, CALL JT AT 800-220-3222

JT Paintball lenses are made from aerospace polycarbonate, the strongest optical material known. IMPORTANT! YOU NEED TO KNOW that the lenses will deteriorate, weaken and possibly break if you don’t clean them exactly as instructed every time you use them. Proper cleaning is the only way to keep the lenses strong and “paintball proof”. Follow these instructions:

ALWAYS CLEAN JT LENSES WITH PLAIN WATER OR JT ANTI-FOG LENS CLEANER! NEVER use anything else. WARNING: Never use cleaners such as Windex®, 409®, Simple Green®, Fantastic®, Gasoline, Kerosene, etc. The strong chemicals will attack the lens and cause it to break. If your JT lens contacts any chemical substance or chemical fumes, THROW IT AWAY. Replace it with a new JT lens for your protection! NEVER take chances.
ALWAYS CLEAN YOUR JT GOGGLE AND LENS EVERY TIME YOU USE IT! Take your goggle apart by taking the lens out of the goggle frame. Wash all paint from the lens, the goggle frame, and inside the goggle frame gutter with plain water. Carefully check the gutter that holds the lens because paint will collect here and attack the lens. Even if you think it is clean, always wash each piece and dry completely before you put the goggle back together. NEVER let any paint or paint spray stay on your goggle overnight.
- a. SINGLE LENS: Take the single lens out of the goggle frame and wash it with warm water only. You can dry your lens and avoid scratching it by using a JT Microfiber Lens Cloth or soft cotton cloth. NEVER use paper towels, newspaper, etc. Polycarbonate scratches easily so be careful.
- b. THERMAL LENS: Take the Thermal lens out of the goggle frame and gently dab the lens with a damp JT Microfiber Lens cloth or a soft cotton cloth. NEVER submerges this dual lens in water. NEVER scrub the soft inner lens. NEVER apply any form of fog resistant solution to the inner lens.
ONLY USE JT ANTI-FOG LENS CLEANER! NEVER use any other brand of fog resistant spray on JT lenses as they may contain chemicals that will damage the lens. Spray JT Anti-Fog Lens Cleaner on a single lens only, spread evenly and allow to dry. When Lens is dry, buff gently with a JT Microfiber Lens cloth or a soft cotton cloth. Don’t over-polish the lens or it will remove the fog resistant protection. WARNING: Unauthorized fog sprays and cleaners may have chemicals that will destroy JT lenses. JT Anti-Fog Lens Cleaner is an approved cleaner.
NEVER STORE YOUR JT GOGGLES OR LENSES NEAR CHEMICALS OR FUMES! Gasoline fumes, common cleaning solutions and most detergents will damage JT Goggles and lenses. ALWAYS store your goggles in a cool, dry place free from all chemicals and fumes.
NEVER STORE YOUR JT GOGGLES OR LENSES IN HOT PLACES OR NEAR HEAT SOURCES! High temperatures will damage JT Goggles and lenses. NEVER keep in car trunks, in plastic bags laying in direct sunlight, near heaters, stoves or other hot places. ALWAYS store goggles in a cool, dry place free of all chemicals and fumes.
CAUTION: BE ON THE ALERT! ALWAYS INSPECT YOUR LENSES AND GOGGLES BEFORE EVERY GAME YOU PLAY.To.
- a. ALWAYS REPLACE LENSES IMMEDIATELY IF SMALL CRACKS APPEAR.Check your goggle for small cracks each time before you play. Replace if any cracks are found.
- b. ALWAYS REPLACE LENSES EVERY TIME THEY ARE SHOT WITHIN 10 FEET by a paintball, even if you can ‘t see any cracks or damage.
- c. ALWAYS REPLACE LENSES ONCE PER YEAR, beginning with your date of purchase.
ALWAYS INSPECT JT GOGGLES THAT YOU ARE RENTING FROM A FIELD. NEVER ASSUME THAT THE FIELD OWNER HAS PROPERLY MAINTAINED JT GOGGLES OR LENSES. IF YOU DETECT CRACKS, PAINT OR OBVIOUS MAINTENANCE FAILURE, RETURN THEM TO THE FIELD OWNER AND DO NOT RENT THEM.

This model is certified by: CCQS Certification Services Ltd. NB 2834Block 1, Blanchardstown Corporate Park, Ballycoolin Road, Blanchardstown,Dublin, D15 AKK1, Ireland

PAINTBALL SOLUTIONSJT Paintball2955 South Maplecrest Road,Fort Wayne, IN 46803(800)-220-3222www.paintballsolutions.com [email protected]

GOGGLE FIT

GOGGLES MUST FIT PROPERLY TO PROVIDE COMPLETE PROTECTION.

Proper fit includes:1. Tightening the strap enough to hold the goggle firmly in place.2. Making sure the goggle seals around the face.

WARNING: Use only JT lenses designed for your specific model of JT mask.

Lens Replacement

To Remove the Lens:

A. Peel the frame off the lens starting at the top center. DO NOT use metal tools such as screwdriver to remove the lens.B. Work your way around the sides to the bottom until the lens completely releases from the frame.

To Install the Lens:To install the lens, insert the lens into the frame groove, starting at one side. Work your way around the bottom of the frame first. Push all the lens tabs through the slots in the frame. Make sure the nose tabs and the top center tab are securely locked into the goggle frame (illustration C).

JT Visor and Mask Instructions

Visor Attachment

Step 1 – Moisten ends of visor posts.

Step 2 – Push center visor post thru the center hole in top of goggle frame.

Step 3 – Push the outer visor posts thru the enlarged holes in top of goggle frame.

To Remove VisorGently pull one pin at a time while pushing that pin up from inside the goggle.

Face Mask Attachment

Step 1 – Align nose mask posts with two inner most enlarged holes on bottom of goggle frame. Push mask posts completely into frame.

Step 2 – Align outer mask posts with holes on rear bottom edge of goggle frame. Push mask posts into frame. Push top mask post firmly into frame.

JT Facemask Attachment Instructions

MASK ATTACHMENT: The JT FACEMASK is designed exclusively for use with the JT goggle system.

NEVER USE JT GOGGLES WITHOUT THE JT FACEMASK PROPERLY ATTACHED.

Notice that the goggle and mask are locked together and there are no gaps around the nose area. This is what your JT mask will look like when the facemask is fitted correctly to the goggle frame. Never use JT goggles without a facemask. And never play a game without your facemask properly fitted to the goggle as shown.

Chin Strap WARNING!

Non-use or removal of a chinstrap and or buckle increases your risk of injury or death and may void your warranty. To properly fasten the buckle, insert the “male prongs” into the “female portion” until you hear an audible “click”. Adjust strap to contact snugly under your chin (see figure A). Unfastening the buckle is accomplished by squeezing the right and left edges of the male prongs until they are automatically ejected from the female portion (see figure B). If additional instructions are required contact JT USA Customer Service at 800-220-3222.

CAUTION: Improper attachment of facemasks can cause eye injury. Follow all installation instructions closely. Use JT goggle only with JT masks. Never use any JT goggles without facemask. Make sure facemask is properly installed and securely attached to goggle. Always wear ear protection. Goggle straps are not ear protectors.

WARNING

NEVER use the JT GOGGLE/MASK system until you have read, understood and followed all instructions and safety precautions in this owner’s manual.

DO NOT THROW AWAY YOUR INSTRUCTIONS. THESE WARNINGS ARE IMPORTANT TO YOUR PERSONAL SAFETY. FOLLOW ALL INSTRUCTIONS TO PROLONG THE LIFE OF YOUR JT PRODUCTS.

Chin strap should fit securely under chin.DO NOT REMOVE STRAPS OR FASTENERS.