Thank you for purchasing the atomiSmart Garage Door OpenerControl your garage door from your phone anytime,anywhere! With the Smart Garage Door Opener youcan also use Alexa and Google Voice Assistant toopen and close your garage door on any Wi-Fienabled smartphone/tablet in the atomi smart opp(available for Android or iOS).
Before you begin1. Know your Wi-Fi network and password.2. Make sure your mobile device is running:• iPhone® 8 or higher and iOS® 8 or higher.Any previous iPhone® or iOS® may experienceslower connections.• Android™ 4.1x or higher.3. Make sure you’re connected to a 2.4GHz Wi-Finetwork (atomi smart app can’t connect to 5GHznetworks).
CompatibilityThe atomi Smart Garage Door Opener can beinstalled to control most garage door openers. Visitatomismart.com/compatible-garage to be sure yours qualifies.
Step 1: Set Up
1. Bring the Smart Garage DoorOpener close to your router2. Slide and remove the backing ofthe Smart Garage Door Opener
3. Plug the micro-USB cable into theSmrt Garage Door Opener andslide the backing back on.
4. Plug the USB into the Smart Wall Adaptor andplug the Smart Wall Adaptor into your wall outlet.
Step 2: Download App
Step 3: Register
Enter the verification code and create a password.
Log into the app.
Step 4: Add Device
Select “Add Device” or click (+) at the top right corner of the Devices Screen.
Choose “Smart Garage Door Opener” from the Device list.
Hold the power buon on the side of your Smart Garage Door Opener for five seconds until the indicator light is flashing rapidly. Then press “Continue”.
Step 5: Connect
Enter your Wi-Fi network and password.
The atomi smart app will connect your device.
Step 6: Installation
1. Now that you have initiated a Wi-Fi connection,unplug the Smart Power Adaptor fromthe wall outlet and bring the Smart GarageDoor Opener to your garage.2. Locate your existing garage door opener paneland loosen it from the wall. Your garage dooropener panel should now be hanging and youshould be able to see the module at the back of it.
3. Connect the white and red wires running from theSmart Garage Door Opener to the correspondingscrew on the back of your garage door openerpanel i.e white to white and red to red4. Secure the garage door opener panel back to thewall and position your Smart Garage Door Openerright above it.5. Use the screws included in your productpackaging to secure the Smart Garage DoorOpener’s backing onto the wall.6. Plug the Smart Power Adaptor into your desiredwall outlet.7. Adjust and position the camera on your SmartGarage Door Opener and test the view on the atomismart app to make sure you are happy with thefacing angle.8. Testing the device:a) Open the app, choose “Smart Garage DoorOpener” and press the light icon buon. Check ifthe device light is turning ON/OFF.b) Press the camera icon buon. You should receivea notification with the captured photo.c) Slide up the switch to open your garage door.Check if your garage door is opening.d) Slide down the switch to close your garage door.Check if your garage door is closing.If you have problems with any of these steps. seeour FAQs section on this guide or visitatomismart.com for more information.
Countdown
Activity
CompatibilityThe following models are compatible with the atomi Smart Garage Door Opener.If you have any questions or concerns please email
16501650ETL3500ETL3600ETL633 Control Board634 Control Board6356367000ETL835836AprimaticALZO 55 with Control boardT230EM51 with control boardT3EC-T3SCASAasa300asa400K50 Control BaordAssa Abloy840C-50841C-35841C-50850C-50851C-35851C-50Auto-OverDC850Automat EasySCOR 800Automatic Remote AccessPY500AC
Automatic TechnologyDCB-05DCB-05V2GDO-11v1 EroGDO-11v3GDO-2GDO-2v6GDO-2v7GDO-4GDO-6GDO-6v2GDO-6v3GDO-6v4GDO-7v2GDO-8GDO-8v3GDO-9GDO-9 DynamoGDO-9v2GDO-9v2 Gen2NES-24v1NES-24v3 NeoSliderSecuraliftSGO1v3AVANTIGarage DoorSDO-21T-SeriesT-Series-v3AVIDSEN1600350AntheaEVER212StyrkaB&DCAD4CADP-Diamond series (oldermodel)Control-A-Door Diamond PDControl-A-Door P DiamondControl-A-Door SFirmamaticMPC-2ROD-1v2PDROD-1v4Roll-A-ProSDO-1v2 PSDO-2v2SDO-2v2 ADV
SDO-3V1 CADSSDO-3V2 CADSSDO-4V1Tilt-A-MaticTRG-306BaishengPKD2.3KBENINCABRAINY 230BRAINY 24BULL 10BULL 424BULL 5MBULL 80MCP.B1024ESACP.B24ESACP.BULL-RI Control unitCP.CORECP.J4 ESACP_J3 Control UnitDA.93AMDU350HeadyJM3JM3 ESAMS4THINK Control UnitJM4MS4BERNALS 101-60S 101-80G402-120Rallye CBernerGA203GA70GA80BFTAlcor NArgoARIESARIES PBoicelliDeimosDEIMOS ULTRABT A 600DeimosBTDEIMOSBT A 400
DEIMOSBT A 600DEIMOS ULTRABT A 400ECOSOLELBA BUELI250BTEOSEOS 120IGEABT(Thalia P ControlPanel)KustosUltraBTAlcaro(Leo-D-Ma control panel)LEO B CBB3 120 F04LEO B CBB3 230 L04LEO B CBB3 120 F02LEO B CBB3 230 L02LIBRA-UL-RPhobos BT and NT NLPhobos N L BTRigel4Rigel5Tir 120Tir 60VIRGOZARA BTL2Bilteksl600aclBOSHProfiliftBOSSbol5bol6BOL4FORZABYANG2M Control BoardBYOUBEAUTYCABDUMPER 10DUMPER 7CAMEBK1200BK1800BK2200BK800BKE1200
EECO300KEECO300KSEECO400KEECO400KSEElite MIRACLE 1 (1998)GGate Model 844HHBW0777HHCT501130HHMJHHS670JJ5011L 4LLA100LLA350LLA400DCLLA400DCSLLA400LA400SLLA400PKGULLA412LLA412-SLLA412DCLLA500LLA500-LA500SLLA5001PKGDCLLA500DCLLA500DCSLLM100LLM1000ALLM50LLM50LLM50kLLM60LLM600ALLM60ALLM60R-128LLM60XXLLM6OKLLM70EVKLLM80LLM800ALLM80AR-128LLM80EVSLLM80XXLLM850EVLLM950EVMM3100MMM385MMMGJ5011UMMHMMH5011UMMHS5011UMMiracleONEMMJMMJ5011U
MModel APTMModel GHMModel GTMModel HMModel HJMModel JMModel Series 1200MModel Series 1300MModel TMModel T (Logic Control ver2)MMT5011MMT5011UPProfessional Model Series1200RRSL12URRSL12VRRSL12VHRRSW12VDCSSL1000SSL3000501USSL3000ULSSL3000UL8SSL505SSL540SSL570SSL575SSL580SSL585SSL590SSL595SSL600SSL930SSW420SSW470SSW490SSWG0370Linear2000XLS22002XLS44000XLS660006650066500-PAAllisterAAK-11AAP-4AAP-5DDelta-3HHSLGJJ6500LLCO75LLCDCO800
Xtreme425-1620425-1636425-1670425-1672ZAP8008800 Series 3ZAREBAG452Zec AutomationFR800
TroubleshootingCannot connect to your Wi-Fi network.Make sure that you have entered the correct Wi-Fipassword during the Wi-Fi setup. Check if there areproblems with your internet connection. If the Wi-Fisignal is too weak, reset your Wi-Fi router and try again.Setup is not working properly.1. Close all apps that are running in the backgroundand re-open the atomi smart app.2. Uninstall and reinstall the atomi smart app thenrepeat the setup process.Garage door not opening/closingCheak that the red and white wires running from thesmart Garage Door Opener are properly connectedto the garage door opener panel.Make sure each wire corresponds to its respectivecolor on the module at the book of the garage dooropener panel i.e red to red and white to white.Not receiving push notificationsOn the atomi smart opp, go to Me > Seings > PushNotifications and slide the bar to turn-on pushnotifications.I’m still having trouble!Wi-Fi networks come in various shapes and sizes,often with many quirks. It doesn’t mean that yourSmart Garage Door Opener is malfunctioning.If the problems persist, please try these steps, in order:
1. Force quit and re-launch the atomi smart app.Check to see if this fixes the issue.2. Unplug the Garage Door Opener and plug it backin. Check to see if this fixes the issue.3. Unplug your Wi-Fi router and plug it back in. Checkto see if this fixes the issue.4. Delete and reinstall the atomi app. Check to see ifthis fixes the issue.5. If all else fails, restore your Smart Garage DoorOpener to factory seings: Unplug your SmartGarage Door Opener. Plug it back in, pull and holdthe power buon for five secs.
FCC Notice:WARNING: Changes or modifications to this unit thatare not expressly approved by the party responsiblefor compliance could void the user’s authority tooperate the equipment.NOTES: This equipment has been tested and found tocomply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful inteerence in a residential installation. Thisequipment generates, uses and can radiate radiofrequency energy, and if not installed and used inaccordance with the instructions, may cause harmfulinteerence to radio communications.However, there is no guarantee that inteerence will notoccur in a particular installation. If this equipment doescause harmful inteerence to radio or television reception,which can be determined by turning the equipment o andon, the user is encouraged to try to correct the inteerenceby one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipmentand receiver.• Connect the equipment into an outlet on a circuitdierent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TVtechnician for help.CAUTION: Suitable for indoor use only.
This product can expose you to chemicals including Pb,which is known to the State of California to cause birthdefects or other reproductive harm. For more information,goto www.P65Warnings.ca.gov.WARNINGFor questions or concerns,email us at Manufactured and marketed by Atomi, Inc.10 West 33rd St., New York, NY 10001atomi™ is a trademark of Atomi, Inc.Designed by atomi in New York. Made in China.One-year limited warranty from date of purchase againstdefects in material and workmanship.Google is a trademark of Google LLC. Amazon, Alexa and allrelated logos are trademarks of Amazon.com, Inc. or its aliates.
atomi WiFi Smart Garage Door Opener User Manual – atomi WiFi Smart Garage Door Opener User Manual –