Bissell 63X4 Series Bagless Canister Vacuum Total Floors User Guide
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING YOUR CANISTER VACUUM.Always connect to a polarized outlet (one slot is wider than the other). Unplug from outlet when not in use and before conducting maintenance. When using an electrical appliance, basic precautions should be observed, including the following:
When using an electrical appliance, basic precautions should be observed, including the following:
To reduce the risk of fire, electric shock, or injury:
■ Do not leave cleaner when it is plugged in.■ Unplug from outlet when not in use and before servicing.■ Do not use with damaged cord or plug.■ To unplug grasp plug not cord.■ Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners, run cleaner over cord, or expose cord to heated surfaces.■ Hold plug when rewinding the cord onto the reel. Do not allow the plug to whip when rewinding.■ Do not use cleaner if it has been dropped, damaged, left outdoors or dropped into water. Have it repaired at an Authorized Service Center.■ Do not allow children to use as a toy.■ Do not use outdoors or on wet surfaces.■ Do not handle cleaner or plug with wet hands.■ Do not put any object into openings, use with blocked opening, or restrict air flow.■ Do not use without filters in place.■ Do not allow hair, loose clothing, fingers or body parts to get near openings or floor brush in the appliance.■ Do not pick up hot coals, cigarette butts, matches or any hot, smoking, or burning objects.■ Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.■ Do not pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapor.■ Do not unplug by pulling on cord.■ Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.).■ Do not use in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.■ Do not use for any purpose other than described in this User’s Guide.■ Always turn off this appliance before connecting or disconnecting vacuum hose.■ Use only manufacturer’s recommended attachments.■ Use only on dry, indoor surfaces.■ Keep openings free of dust, lint, hair, etc.■ Keep appliance on a level surface.■ Turn off all controls before plugging or unplugging cleaner.■ Be extra careful when cleaning stairs.■ Close attention is necessary when used by or near children.
SAVE THESE INSTRUCTIONS FOR FUTURE USEThis model is for household use only
THIS APPLIANCE HAS A POLARIZED PLUGTo reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way
Thanks for buying a BISSELL vacuum
We’re glad you purchased a BISSELL vacuum. Everything we know about floor care went into the design and construction of thiscomplete, high-tech home cleaning system.Your BISSELL vacuum is well made, and we back it with a limited two-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL vacuum. Thanks again, from all of us at BISSELL.
Product View
Assembly
1. Insert flexible hose by inserting it into the suction opening on the canister. To disconnect press the release buttons and pull the hose connector out of the hose connection opening.
2. Connect telescoping extension wand to the handle end of the flex hose.
3. Connect floor nozzle to the end of the telescoping extension wand.
4. Once assembled, you can store your vacuum in one of two positions:A. Storing in the in-use position: To store with the floor nozzle attached, insert the storage clip (located on the back of the floor nozzle) into the storage slot on the rear of the vacuum.A. Storing in the in-use position
B. Storing in the upright position: To store with the floor nozzle attached, stand the vacuum in the upright position and insert the storage clip (located on the back of the floornozzle) into the storage slot on the bottom of the vacuum.B. Storing in the upright position
Operations
Power cordThe power cord is located at the rear of the vacuum. Gently pull out the power cord, watching for the yellow line. Stop pulling the power cord once the yellow line is visible. There is also a red line, which indicates the end of the usable cord. Do not pull the power cord out beyond the red line.
Automatic cord rewindYour vacuum is equipped with an automatic cord rewind. When cleaning is finished, press the power button OFF ( ) and grasp the plug to disconnect from the electrical outlet. Hold the plug and press the automatic cord rewind button to rewind the cord automatically.
Power buttonTurn the power on or off by pressing lightly downward on the power button ( ).
Thermal motor protectionAn internal thermal protector has been designed into your cleaner to protect it from overheating. When the thermal protector activates, the main vacuum motor will stop operating. If this happens, proceed as follows:
- Turn the cleaner OFF and unplug from electrical outlet.
- Check the cleaner for the source of overheating problem (ie. Full dirt cup,dirty filters or clog).
- Fix the problem by following the steps in the maintenance section of the user guide.
- When the motor cools for approximately 30 minutes, the thermal protector will reset and cleaning may continue. If the cleaner will not turn on or the thermal protector continues to activate, your cleaner may need servicing. Call BISSELL Consumer Care or visit the website.
CAUTION:Before using your vacuum, make sure that the dirt cup and all filters are in place. Do not operate your vacuum without the dirt cup and filters.
Operations
Special toolsYour BISSELL canister vacuum is not only a powerful carpet and rug vacuum cleaner, it’s also a versatile bare floor vacuum cleaner and above floor vacuum cleaner when you select one of the special tools.
Floor nozzle:Use to vacuum carpets, rugs and bare floors. Swivel head turns to get into tight spaces and fits under cabinets.
- To vacuum carpets and rugs, push the brush switch to the carpet position . This will pull the brushes up into the floor nozzle.
- To vacuum bare floors, push the brush switch to the bare floor position . This will extend the brushes down from the floor nozzle
Upholstery tool:Use the upholstery tool to clean curtains, draperies, cushions and fabrics.
Dusting brush attachment:Attach the dusting brush attachment to the upholstery tool to dust furniture, blinds, books, amps, shelves and baseboards.
Crevice tool:Use the crevice tool in tight, narrow spaces.
Accessory clip:You can store three accessories in the accessory clip at the same time. Store accessories in the accessory clip by pushing them into the clip while turning a little.
Operations
Variable suction power controlThe variable suction power control is located on the top of the vacuum. Turn the control to the right for maximum suction. Turn the control to the left to minimize suction for lightly soiled areas or delicate fabrics.
Clean Filter indicatorThe clean filter indicator is located on the top of the dirt container. It will turn RED when the dirt container needs to be emptied or the filters need cleaning
Maintenance & Care
Emptying the dirt container1. Turn vacuum OFF ( ). Unplug the vacuum from electrical outlet.2. Press the dirt container release button and lift out of the vacuum by its handle.
3. Remove the dirt container lid by lifting up on the tab above the filter.
4. Empty the dirt into a garbage container.5. Replace lid onto dirt container by inserting the 2 tabs into the lip on front of the container and snapping the back into place.6. Place the dirt container back into the vacuum until it snaps into place
WARNING:To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outletbefore performing maintenance or troubleshooting checks.
Maintenance & Care
Cleaning the pre-motor pleated filter and foam filter
The pre-motor filters protect the motor from dirt and dust particles and are washable.
- Turn vacuum OFF ( ). Unplug the vacuum from electrical outlet.
- Press the dirt container release button and lift out by its handle.
- Using your thumb, pull out on the black tab on the top of the pleated filter frame to release washable PLEATED and FOAM filters.
- Remove the foam filter and gently wash using warm water. Allow to completely dry before replacing. Hold the white pleated filter under hot slow running tap water at an angle to allow the water to wash away the dirt from inside the pleats. Turn the filter over to wash the other side and repeat until the filter is clean. Carefully shake the water from the surface of the pleated filter and allow it to dry completely before replacing. Never clean the pleated filter with a brush.
- Replace filters by placing the foam filter into the back of the filter frame. Insert bottom of frame first into the opening and push shut to catch onto the spring loaded tab.
- Place the dirt container back into the vacuum until it snaps into place.
NOTICE:This product is intended for household use only and not for commercial or industrial use. Vacuuming of dust from products like plaster, concrete or ashes will damage the motor and void the warranty.
WARNING:To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.
Maintenance & Care
Cleaning the post-motor filterThe post-motor filter assists in the filtration process to return clean air to the room.1. Turn vacuum OFF ( ). Unplug the vacuum from electrical outlet.2. Remove the filter door (located on the back of the vacuum) by pushing on the tab on the filter door and pull out toward you.
3. Remove the post-motor filter by grasping the lip of the filter frame and pulling out toward you. Check for dust and debris and replace if dirty4. Replace the filter door by inserting the two tabs on the side of the filter door into the slots of the vacuum door opening and pushing into place. Be sure the tab on the outside of the filter door snaps into place.
WARNING:Do not operate cleaner with damp or wet filters or without all filters in place
Troubleshooting
Other maintenance or service not included in the manual should be performed by anauthorized service representative.
Replacement Parts
Item Part No. Part Name1 160-2027 Dirt Cup Assembly2 160-2028 Dirt Cup pre motor Filter3 160-2029 Post-Motor Filter4 160-2030 Floor Nozzle5 160-2031 Flexible Hose with Handle6 160-2032 Telescoping Extension Wand7 160-2059 Upholstery Brush8 160-2060 Dusting Brush9 160-2058 Crevice Tool
Warranty
If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail, telephone, or regular mail.
Limited Two-Year WarrantySubject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL will repair or replace (with new or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for two years, any defective or malfunctioning part.This warranty applies to product used for personal, and not commercial or rental service. This warranty does not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the User’s Guide is not covered.
BISSELL IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTYTHIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE TWO-YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
If your BISSELL product should require service:Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area or visit our website – www.bissell.comFor information about repairs or replacement parts, or questions about your warranty, call:
Read More About This Manual & Download PDF:
Bissell 63X4 Series Bagless Canister Vacuum Total Floors User Guide – Bissell 63X4 Series Bagless Canister Vacuum Total Floors User Guide –
[xyz-ips snippet=”download-snippet”]