Eachine X140HV Mini Drone Quick Start Guide

X140HV: QUICK START GUIDE

Package included:

• 1 x X140HV Frame Kit
• 1 x Atmosphere light strip
• 4 x 1507/2500KV Brushless Motor
• 1 x 4 In 1 20A Brushless ESC
• 1 x Betaflight F4 Flight Controller
• 1 x FOXEER Arrow MICRO PRO Camera
• 1 x XF5805 /5.8G 40CH 25/100/200/300mw
• Switchable VTX
• 1 x Multi functional taillight module
• 8 x T3056c Propeller (transparent purple * 2 Pairs /transparent * 2 Pairs)
• 2 x 150*15mm battery strap
• 1 x Battery board set ( 2mm battery protection plate*1 , EVA plate*2 , Anti-slip plate*1 )
• 4 x M5 screws nut (black color*2 , sliver color*2)
• 1 x Screw set
• 10 x 2.5x100mm Nylon cable tie
• 2 x Wrench

Frame kit

• Wheelbase: 140mm
• Floor thickness: 3mm
• Upper plate thickness: 1.5mm
• Side panel thickness: 1.0mm
• CNC 6065 Custom Aluminum Column

Motor

• KV: 2500kv
• Voltage: 2-6s
• Weight: 17.7g (including line)
• Output shaft length: 14mm
• Maximum pulling force: single 740g
• (6S/3056 three-leaf paddle)
• Maximum power: 480w
• Number of slots: 9n12p
• Mounting hole spacing: 12*12mm
• Mounting hole specification: m2
• Bearing: nsk
• N52 NdFeB magnet
• Recommended paddle: 3 inches

ESC

• Continuous current: 20A
• Peak current: 25A (10s)
• Bec output: NO
• Input voltage: 2 ~ 6 s
• Main control chip: 48mhz efm8bb2
• Firmware upgrade: support dshot600 /blheli _ S/Oneshot125
• MOS: 3*3
• MOS model: pe632ba 30v53a

Flight controller

• Main control chip: stm32f411
• IMU: mpu6000 6-axis sensor
• BEC: 5v/1a
• Integrated OSD
• PPM/DSM/IBUS/UAR sharing: UART1-RX
• Installation size: 20*20
• Weight: 3.0g
• Support firmware: betaflight/cleanflight/inav
• Support for programmable LED Sprit
• Reserve buzzer interface

Switchable VTX

• Support TBS SmartAudio
• Transmitting power: 25/100/200/300mw adjustable in three steps
• Frequency points: 40ch
• Video format: full NTSC / PAL format
• Input voltage: 7V ~ 26V
• Power consumption: +12V/600MW, 260ma
• Size: 25 × 20 × 4mm
• Weight: ≤ 3.2g (except antenna) With copper tube mini antenna (ipex interface)

Tips: Before powering up, you must first install the antenna to avoid the possibility of burning the tuner.

Camera

• Image sensor: 1/3″ Sony Super Had II CCD + NextChip 2040 DSP
• Pixel: PAL: 976 (H) x 494 (V); NTSC: 768 (H) × 494 (V)
• TV system: PAL
• Resolution: 600TVL (color) 650TVL (black and white)
• Synchronization: internal
• Minimum illumination: 0.01lux
• WDR: Support
• OSD programming board: support
• White point repair: support
• DNR: 2D DNR
• Camera title: support
• Image adjustment: support
• OSD: Edit Name, Power, Flight Time
• Input power: 5-40V
• Storage temperature: -40 C~60 C
• Working temperature: -10C~50C
• Power consumption: 70ma
• Low pressure alarm: support
• Default mode: def, vivative, sunny, cloudy, led tr, usr1
• Size: 18.5*19mm (without bracket)
• Weight: 5.3g (without bracket)

Atmosphere light strip

Feature: Low power consumption, no heat, no impact on flight time. Only 10% of the power consumption of traditional LEDs. Beautiful, soft, not dazzling. Lines can be bended, folded and sheared at will. The installation is flexible and convenient for you to play freely, Long life.

Multi functional taillight module

• Working voltage: 5v
• Integrated programmable taillight / bb ring / light strip drive
• RGB full color highlight WS2812b lamp beads *2
• Integrated 80dBi buzzer
• Integrated photon emission line driver
• Size: 20*20
• Weight: 3.5g

Motor Unlock/lock

Motor Unlock: Put the throttle rocker at the lowest point, move the rudder rocker to the right and keep it for more than 2 seconds. The blue state indicator is always on, that is unlock the motor.

Motor lock:Put the throttle rocker at the lowest point, move the rudder rocker to the leftmost side, and the red state indicator is always turned on to lock the motor. At this time, pushing the throttle rocker motor upward will not rotate.

Traversing flight

1. Flying is more suitable for experienced pilots.
2. During the flight, please keep the flight within the video receiving range (the actual range depends on the flight environment and weather conditions).
3. During flight, please avoid crowd, animals and High voltage wires and other obstacles.

Eachine X140HV Mini Drone Quick Start Guide – Eachine X140HV Mini Drone Quick Start Guide –