Eachine Wizard Ts130 Quick Start Guide
Package included:
1 x Eachine Wizard TS130 frame kit1 x TS 20A 4in1 Brushless ESC4 x TS1507 4100KV brushless motor1 x F4 flight controller1 x FOXEER Arrow MICRO PRO camera1 x 5.8G 40CH 25mw 100mw 200mw switchable VTX2 x T3056C 3-blade propeller transparent white CW2 x T3056C 3-blade propeller transparent white CCW2 x T3056C 3-blade propeller blue CW2 x T3056C 3-blade propeller blue CCW1 x Antenna1 x Battery strap2 x Carbon fiber wrench10 x Nylon cable tie
1.0 Frame kit
2.0 MotorWheelbase: 130mmMaterial: 3K carbon fiberTop plate thickness: 2mmBottom plate thickness: 3mmArtist: hydrographics transfer printing
Idle Current (Io/10V): 1.68A Stator Thickness: 7mmLipo Cell: 3-4S Motor Diameter: 21.6mmWeight: 17.6g Motor Body Length: 15.5mmMax Continuous Current: 26A Overall Shaft Length: 29mmMax Continuous Power: 416W Prop adapter shaft: M5Max thrust: 626g(4S/3″) Bolt holes spacing: 12mmConfigu-ration: 9N/12P Bolt thread: M2Motor Resistance (RM): 0.0495 Ω Propeller: 3”Stator Diameter: 15mm
3.0 ESC
Continuous current: 20APeak current (5S): 25AInput voltage: 2-4SSupports Dshot600, Dshot300, Dshot150Size: 27x27mmWeigjt: 3.3g
4.0 Flight controller
CPU: f4STM32 F405 SCMInput voltage: 3-4SSensor: MPU6000 SPIBuilt in OSDBuilt in 5V 2A BECSize: 25x25mmWeight: 2.3g
5.0 Switchable VTX
Input voltage: 7-24VDimensions: 20x20mmSize: 27mm×27mm×4.5mmAdjustable 25mw / 100mw / 200mwSupports smart audio (remote OSD parameter adjustment)There are two ways to control the frequency and power of the launches:<1> Enter the release: FEATURES->VTX SA can enter the following interface.uses remote control to visualize control, as shown in Figure 1.1
Figure 1 .1
The second row is the status bar, respectively.F:freestyle modeF5: is now in frequency band F, fifth frequency point.5820: now has a frequency of 5820.500: now has a transmit power of 500MWThird linesBAND: indicates frequency band, and BAND can bemodified by remote control.A (BOSCAM A) B (BOSCAM B)E (BOSCAM E) F (FATSHARK) F (E)Fourth linesCHAN: represents frequency points, and the 1—8 can be modified by remote control.Fifth lines (FREQ): indicate thecorresponding frequency now, changing with the band and Chan above.Sixth lines POWER: indicates the transmission power and can be adjusted.
5.0 Switchable VTX
Seventh linesSET: Enter and select YES to confirm your BADN, CHAN, POWER settings and take effect immediately., as shown in Figure 1.2 below
Figure 1 .2
Eighth lines
The CONFIG: function is set in, as shown in Figure 1.3 below.
Figure 1 .3
OP MODEL: mode adjustment, with free mode and race mode, needs reboot to take effect.FSEL MODE: regulates frequency setting mode, CHAN and user, user mode is temporarily invalid.PIT FMODE:PITMODE mode, with PIR and POR mode.
5.0 Switchable VTX
In the POR mode, POR FREQ: can enter into any frequency between 5300-5900, as shown in Figure 1.4.
Figure 1 .4
STATX: status information
<2> XMM-VTX is operated by a button with three LED lights (red light CH1-8; blue light BAND1-5; green light power 1-3 <25- 100-200 mW>)and TBS Smart Audio remote control operation.Keyboard operation: Long press 3S (three LED indicators are all on) to open and enter CH switching operation, and the red light will flash, flashing once represents the currentCH1 (2-8 times for CH2-CH8 respectively). At this time, a short press of the key CH plus 1 will flash the corresponding number of times. CH1-8 cycle. Press the button 3S (three LED lights are all on) to open and enter the BANDswitching operation, and the blue light will flash. The flash once represents the current BAND1 (2-5 times for BAND2-BAND5 respectively). At this time, press the button BAND plus 1, and the blue light will flash correspondingly. BAND1-5 cycle. Press the button 3S (three LED lights are all on) again to open the power switching operation, and the green light will flash, one time represents the current power of the first grade (2-3 times for the green light flashing respectively), at this time, press the button power to add one gear, and the green light will flash the corresponding number of times. Power stall 1-3 cycle. Press the button 3S again (3 LED lights are all bright) to release the above settings again. Note that the previous settings will not be saved if the power is off before saving. For example, if CH is only set, it is also necessary to press 3S three times longer to save the settings.Long press button 8S (green light) quit PIT mode.
5.0 Switchable VTX
Note: In the remote control, the power of 25 corresponds to the actual 25 mW, 200 corresponds to the actual 100 mW, and 500/800 corresponds to the actual 200 mW.
6.0 Camera
Solution: 1/3” Sony SUPER HAD II CCD+Nextchip 2040 DSP Pixel:PAL: 976(H) x 494(V);NTSC: 768(H)×494(V)TV System: PAL/NTSC (based on country) Resolution: 600TVL(color) 650TVL(B&W) Synchronization: internal Min. Illumination: 0.01Lux WDR: supportOSD programming board: support White Dot Repair: support DNR: 2D DNR Camera Title: support Image Adjustment: support OSD: Edit Name, Power, Flying timeInput Power: 5-40V Storage Temperature: -40 C ~ 60 C Working Temperature: -10 C ~ 50 C Power Consumption: 70mA Low voltage alarm: SupportPreset mode: DEF, VIVID, SUNNY, CLOUDY,LED TR,USR1 Size: 18.5*19mm (bracket excluded) Weight: 5.3g (bracket excluded)
7.0 Motor Unlock/lock
Motor UnlockPut the throttle rocker at the lowest point, move the rudder rocker to the right and keep it for more than 2 seconds. The blue state indicator is always on, that is unlock the motor.
Motor lock
Put the throttle rocker at the lowest point, move the rudder rocker to the leftmost side, and the red state indicator is always turned on to lock the motor. At this time, pushing the throttle rocker motor upward will not rotate.
8.0 Traversing flight
- Flying is more suitable for experienced pilots.
- During the flight, please keep the flight within the video receiving range (the actual range depends on the flight environment and weather conditions).
- During flight, please avoid crowd, animals and High voltage wires and other obstacles
Read More About This Manual & Download PDF:
Eachine Wizard Ts130 Quick Start Guide – Eachine Wizard Ts130 Quick Start Guide –
[xyz-ips snippet=”download-snippet”]