User Manual
JLab GO Air Earbuds User Manual
We love that you are rocking JLab Audio!We take pride in our products and fully stand behind them.
YOUR SATISFACTION IS GUARANTEEDYou may exchange or return merchandise within 30 days of the purchase date.Learn more at jlabaudio.com/guarantee
YOUR WARRANTYYou may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audioauthorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT USReach out to us at or visit jlabaudio.com/contact.
BLUETOOTH PAIRING
Remove pull tab.The charging case light will start pulsing blue.
Remove earbuds by pulling straight up or from side.
One earbud will blink blue/white indicating3 ready to pair to your device.
Select “JLab GO Air” in your device’sBluetooth settings to connect.Voice prompt “You’re connected” followed bysolid white lights will indicate you are connected.
ADDING NEW / ADDITIONAL BLUETOOTH DEVICES:Turn OFF Bluetooth from any previously connecteddevice. Turn ON Bluetooth from new device.Take earbuds out of the case.Earbuds will automatically enter Bluetooth Pairing.Select “JLab GO Air” in device settings to connect.
BUTTON FUNCTIONS
|
VOLUME DOWN: Single tap.SIRI (iOS) or “OK GOOGLE”(ANDROID): Double tap.TRACK BACK: Press & hold 1+ sec.EQ CHANGE: Triple tap.POWER ON: Press & hold 3+ sec |
VOLUME UP: Single tap.PLAY / PAUSE: Double tap.TRACK FORWARD: Press & hold 1+ secANSWER: Single tap.HANGUP: Double tap.REJECT INCOMING CALLS:Press & hold 1+ secEQ CHANGE: Triple tap.POWER ON: Press & hold 3+ sec. |
VOICE PROMPTS“Hello”: Power ON“Ready to Pair”: GO Air is readyto pair to Bluetooth device“Bluetooth Connected”:Earbud is connected to device“Battery Full”: 100-75%“Battery Medium”: 75-25%“Low Battery”: Less than 25%(When power decreases to 10%,“Low Battery” will play one time)“Goodbye”: Power OFF
CUSTOM EQ3 SOUND MODES
Tap either the right or left earbud 3 times for different EQ settings (GO Air will cycle 3 EQ settings).
CHARGING EARBUDS
Earbuds will power off when placed in the caseand first show charging case battery level.
Then pulsing blue light indicates earbuds are2 charging and turns off when fully charged.
Earbuds will auto power on and connect3 to your device when removed.
CHARGING CASE
Connect the GO Air into acomputer or USB 5V 1A(or less) output device.
FITTING
QUICK TIPS
- The left or right earbud can be used independently for music and phonecalls. Simply choose one and take out of the case to connect.
- Only ONE Bluetooth device can be connected at a time. Turn offBluetooth on unwanted devices and turn on Bluetooth on chosendevice to connect.
WARNING
Fully dry off the earbuds before
putting in the charging case toavoid any damage to the case.The earbuds are sweat/waterresistant but the case is not.
ENHANCE YOUR EXPERIENCE WITH THE JLAB AUDIO APP:
https://apps.apple.com/us/app/jlab-store-and-burn-in-tool/id1243023170
https://play.google.com/store/apps/details?id=co.tapcart.app.VMWtwhI4Hm&hl=en_US&gl=US
CAUTIONS
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing the earbuds.
- Wax may build up in the earbud tips, lowering the sound quality.Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
- If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
- If you experience regular discomfort while using this product, discontinue use and consult your physician.
- We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.
Read More About This Manual & Download PDF:
JLab GO Air Earbuds User Manual – JLab GO Air Earbuds User Manual –
JBUDS AIR EARBUDS User Manual – JBUDS AIR EARBUDS V2 User Manual – JBUDS AIR EARBUDS User Manual –