imperii Green Bluetooth Earphones User Manual
Introduction
Congratulations, and thank you for choosing the Bluetooth Earphones. This manual will help you operate the Bluetooth Earphones, but you should first familiarize yourself with the Bluetooth functionality of your mobile phone or other device before using the Bluetooth Earphones.
Safely Rules
- Please follow the rules depicted in this manual closely to ensure your safety. Before using this Bluetooth earphone we would strongly encourage you to read through this user manual.
- Be wary of any edges, uneven surfaces, metal parts, accessories and its packaging to prevent any possible injury or damage.
- Do not modify, repair or dismantle this earphone. Doing so may result in fire, electric shock, complete breakdown of this Bluetooth earphones, etc. All of which are not covered under warranty.
- Do not use any diluent or volatile liquid to clean the Bluetooth earphones.
- Do not use the Bluetooth earphones in a hazardous location.
Package Contents
IX Bluetooth Earphones
Connection Diagram
Left Side:
Right Side:
How To Use
General Functions
|
Desired Result |
Required Action |
|
Power On/ Power Off |
Press and hold the multi- function button for 3 seconds until the LED light turns blue. |
|
Volume Control |
Press Vol + /Vol – for volume control. |
|
Switch Track |
Long press Vol + / Vol – (3 seconds) to switch track. |
|
Pairing |
Use a Bluetooth function mobile phone or other Bluetooth master device to perform necessary pairing actions. |
|
Charging |
Plug the Micro USB into the USB port. |
|
Answering a Call |
When you receive a call, press the multi-function Button once to accept the call, or answer the call normally via your mobile phone |
|
End a Call |
Press the multi-function Button once to end the call or hang up your mobile phone. |
Pairing Bluetooth Earphones to a mobile phone or other device
- Keep the distance between your Bluetooth Earphones and mobile phone (or other devices) within 32.8 Feet.
- Power on the Bluetooth Earphones.
- Press and hold multi-function button for 3 seconds. The LED indicator flashes BLUE & RED to indicate pairing mode.
- Activate the Bluetooth function on your mobile device and select “Targus Earphone” to pair.
- The mobile device indicates if pairing has been successful.
Attention: If the pairing is not successful within 3 minutes, the earbuds will power off, please repeat the pairing procedures to try again.
4.3.Charging your earphonesConnect the Micro USB plug to the Micro USB charging port on the earphones positioned at~ in earphones diagram on page 3. Connect the USB plug lo a USB port on a computer or wall adapter to activate charging. The light will turn red while charging, the light will tum off once fully charged.**Make sure to keep the earphones charging for a minimum of 6 hours before initial use.
WARNING:
- You must select a qualified charger from a regular manufacturer.
- You must charge the Bluetooth earphones if it has been not used for more than 12 months.
Product Specifications
Bluetooth Earphones Specifications
|
Bluetooth Version |
4.0 |
|
Frequency Range |
20Hz – 20KHz |
|
Transmission Frequency Range |
2.4GHz. 2.48GH |
|
Bluetooth Operation Range |
32.8 Feet |
|
Bluetooth Talk Time |
2.5 – 3 Hours |
|
Bluetooth Music Time |
2.5 – 3 Hours |
|
Standby Time |
48 Hours |
|
Charging Time |
1.5 Hours |
FAQ
- Why Is there no power even when the earphones are turned on?Ans= Ensure the battery has been charged up to 6 hours for initial use.
- There Is no sound during playback.Ans= Check the connection between the earphones and the phone or computer, if the connection is not established, please connect again. Make sure the earphones are paired with your Bluetooth enabled device.
Keep all relevant information for future reference.
TECHNICAL SERVICE: http://www.imperiielectronics.com/contactonos
imperii Green Bluetooth Earphones User Manual – imperii Green Bluetooth Earphones User Manual – imperii Green Bluetooth Earphones User Manual –
[xyz-ips snippet=”download-snippet”]