imperii SmartBand Fitech User Manual

imperii SmartBand Fitech User Manual

Adaptation Platform and Requirements

 Android 5.0 and above   IOS 8.0 and aboveMobile Phone Hardware Supports Bluetooth 4.0

Android

iOS

Charging of Smart Bracelet

1.  Schematic Diagram of Host of Smart Bracelet.     
2. Hold the main body of the smart bracelet with one hand, and hold the wrist strap at the USB end with the other hand. Pull the wrist strap to either side of the smart bracelet until the wrist strap at the USB end is removed.
3. Start charging. Select the USB end of the smart bracelet to use the charger USB or the computer USB to charge the smart bracelet (it can be charged fully in about 2 hours).

Download and Binding of the Smart Bracelet APP

1. Turn on the machinePress the touch area for about 3 seconds to start the machine or plug in the charger to charge and start the machine.
2. Download and install APP
   1. Use your mobile phone to scan the QR code and download APP.
   2. IOS system chooses APP store, Android system can choose360phone assistant or download and install YoDo with Polaroid.Note: Mobile phones must support Android 5.0 Lollipop and above or IOS 8.0 and above, and above Bluetooth 4.0.
3. Binding the smart bracelet
   1. Open the epp and click the Bluetooth Icon In the top left comer of the homepage.”“.
   2. switch to the “Select Bind Devices” Interlace.
   3. Click on your device in the list of scanned devices.
   4. Binding success.

After the bracelet is bound successfully, every time the bracelet APP is opened in the future, the bracelet will automatically connect with APP via Bluetooth and click on the corresponding “exercise”, Sleep”, “heart rate” and “more” at the bottom of the APP data page to synchronize the data.

Function Interface of the Smart Bracelet

Click on the touch symbol in the startup state, and the main interface can be switched freely, such as the interface shown below.

1. DialWhen the smart bracelet and APP are first paired and connected, the time, date, power symbol and Bluetooth connection success symbol of the mobile phone will be synchronized.
2. Step counting, distance, caloriesThe step counting interface displays step counting, and the smart bracelet Is worn on the wrist. When the user walks and the arm swings, the smart bracelet automatically records data such as step number, walking distance, calorie consumption, etc.
3. SportsPress the touch area for about three seconds in the sport interface to enter the four sport modes on the right.               
4. Heart Rate MonitoringClick on the touch area to switch to the heart rate monitoring interface to support real-time dynamic heart rate and understand your own health data. In the heart rate monitoring mode, the endurance of the smart bracelet will be reduced. Note: Dynamic heart rate, that is, data will not stop when monitoring at this interface, unless you exit after crossing this interface.
5. Blood pressureThe environment for blood pressure measurement should be quiet and at an appropriate temperature. Rest for at least 5 minutes i before measurement. Avoid nervousness, anxiety and emotional excitement. The test shall be repeated 3 times, with an Interval of 2 minutes. Take the average of 3 readings and record.Note: The measured blood pressure data are for reference only and cannot be used as the basis for medical related aspects.
6. Blood oxygenBlood oxygen saturation (SpO2) is the percentage of the amount of Oxyhemoglobin (Hb02) which has been oxygenated in the blood and the total amount of hemoglobin(Hb, hemoglobin) which can be · oxygenated. It means the concentration of oxygen in blood.Note: The blood pressure and blood oxygen data are for reference only and should not be used as a basis in medical asp ects.
7. SleepBoth the end of the smart bracelet and the APP home page can view sleep status.
8. MessageSwitch to the message interface, and long-press the touch area for 3s by finger to access the message content; click the touch area to switch to next piece of content; content includes the messages of incoming call and push from chat software. At most fifteen pieces of messages can be saved. When it is up to fifteen pieces, the messages displayed before can be substituted one after another.
9. Morepress the interface “more” for long and enter into the following function interface.
10. Find mobile phoneSwitch to the mobile phone Interface, press the touch area for long, and the mobile phone will send out the ring tone synchronously.
11. AboutSwitch to the interface “About”, and press the touch area for long to see the MAC address of the bracelet. APP only needs to find the corresponding MAC address when connecting the bracelet.
12. ThemeSwitch to the theme interface, long press the touch area to switch the theme freely.         
13. Power OffIn the shutdown interface long press the touch area for more than 3 seconds to shut down.

Frequently asked questions

1. Ask: What if you can’t find the bracelet?Answer:First, please check whether the bracelet has electricity, Secondly, please bring the bracelet close to the mobile phone and try lo connect the bracelet again.
2. Question:Why can’t the bracelet receive the message push?
   1. Answer: Confirm that the message push switch is turned onat the mobile phone client.
   2. Confirm that the message can be displayed normally on the mobile phone notification bar. and the bracelet message is pushed by reading the mobile phone notification bar message. If there is no message in the mobile phone notification bar, the bracelet will not be able to receive the push.
3. Question: Why did my heart rate test fail?Answer: When measuring the heart rate, be careful to keep the person at rest and keep the bottom of the bracelet close to the arm without obvious gaps. Do not shake the arm during the measurement.

TECHNICAL SERVICE

Visit: http://www.imperiielectronics.com/contactus

imperii SmartBand Fitech User Manual – imperii SmartBand Fitech User Manual – imperii SmartBand Fitech User Manual –