Logitech Zone Wireless Plus User Manual

Logitech Zone Wireless Plus User Manual

KNOW YOUR PRODUCT

WHAT’S IN THE BOX

1. Headset
2. USB-A Unifying™ + audio receiver
3. USB-C to A adapter
4. USB-A to C charging cable
5. Travel bag
6. User documentation

POWER ON/OFF

1. Press power button for 1 second.
2. Once powered on, light indicator turns whiteIf no device is connected, it will flash white slowly.

PAIRING VIA BLUETOOTH®

1. Press power button for 2 seconds. Light indicator will flash white rapidly.
2. Open Bluetooth® settings on your device.
3. Select Zone Wireless Plus in discoverable devices.
4. Once successfully paired, light indicator will turn solid white.

PAIRING HEADSET, KEYBOARD AND MICE VIA USB RECEIVER

1. Download Logitech® Unifying Software at www.logitech.com/support/unifying.
2. USB-AInsert the Zone Wireless Plus receiver into the computer USB-A port.USB-CInsert the USB-A receiver into the USB-C adapter. Then insert the adapter into the computer USB-C port.
3. Zone Wireless Plus headset is already paired to the receiver it ships with. Just power on the headset.Once successfully paired, the light indicator on the receiver will remain solid white. Light indicator on the headset will turn solid white.
4. To pair mice and keyboard,
   • Open the software and continue clicking “Next” on the bottom right corner. If you already have other unifying receivers (with logo), please unplug them.
   • Locate the OFF-ON slider on your mice and keyboard. Turn each device off and back on to restart your devices and finish pairing.
     • If paired, please follow the on-screen prompt and test it out to confirm successful pairing.
     • If pairing failed, please retry or refer to our support pagewww.logitech.com/support/zonewirelesspluspairingNOTE: you can pair up to 6 Logitech Unifying peripherals.

ADJUSTING HEADSET

1. Adjust headset by sliding earcups up and down the headband.
2. It may be easier to adjust the headset on your head.

ADJUSTING THE MICROPHONE BOOM

1. Microphone boom rotates 270 degrees. Wear it on either left or right side. Audio channel will switch automatically, depending on the direction you are wearing the microphone.
2. Flexible microphone boom — adjust boom location to capture voice better.

HEADSET CONTROLS

TEAMS version
	Usage	Button	Action
Call controls	Answer / End call	Multi-function	Short press
Reject call	2 second press
Resume call	Short press
Transfer active call to other device	Short press
Teams activities	Check connection to teams	Short press
Quick access to Teams	Short press
Respond to Teams notifications	Short press
Trigger Teams voice skills (Cortana)	2 second press
Media controls	Play / Pause	Multi-function	Double press
Track forward	Multi-function and “+”	Short press
Track backward	Multi-function and “–”	Short press
Volume	Volume up	“+”	Short press
Volume down	“–”	Short press
Headset connection and battery status	Check connectivity and battery life	“+”and“–”	Short press

UC version
	Usage	Button	Action
Call controls	Answer / End call	Multi-function	Short press
Reject call	2 second press
Voice assistant	Multi-function	2 second press
Media controls	Play / Pause	Multi-function	Double press
Track forward	Multi-function and “+”	Short press
Track backward	Multi-function and “–”	Short press
Volume	Volume up	“+”	Short press
Volume down	“–”	Short press
Headset status	Check connectivity and battery life	“+”and“–”	Short press

Note:

• Teams activities are only functional when Teams is running on an unlocked computer
• Media control functionality depends on type of application
• Call activities are always the first priority When two devices are connected, the Bluetooth®connection will be prioritized over receiver When two Bluetooth® devices are connected, the last active device will override the other

Tip: Button customizations and Music EQ controls available on Logi Tune app

Mute

ACTIVE NOISE CANCELLATION (ANC)

ANC blocks out the noise around you to help you concentrate on the task at hand.

1. Press the ANC button on the side of the earcup.
2. There will be voice notifications when turning ANC on and off. These can be turned off in the Logi Tune app.

HEADSET LIGHT INDICATOR

Light	Status
White	Solid	Powered on or fully charged
Breathing	Battery charging
Fast pulsing	Bluetooth® pairing mode
Slow pulsing	No paired device
Red	Solid	Low battery
Fast pulsing	Bluetooth® pairing mode while low battery
Slow pulsing	No paired device while low battery

RECEIVER INDICATOR LIGHT

TEAMS version
Light	Status
White	Fast flashing	Pairing mode
Solid	Paired
Repeat flashing on and off	Incoming call
Purple	Pulsing	Connecting to Teams / Teams notifications
Flashing for 10 seconds and off	Failed connection to Teams
Flashing 3 times and off	Not connected to Teams
Solid	Connected to Teams
Red	Solid	Mute on

 

UC version
Light	Status
White	Fast flashing	Pairing mode
Solid	Paired
Repeat flashing on and off	Incoming call
Red	Solid	Mute on

Note: Receiver light indicates headset status only.

CHARGING

Headset automatically powers off when left idle. Sleep timer can be changed in the Logi Tune App. Headset indicator light will turn RED when battery is low.Charging via USB cable:

1. Plug the USB-C cable end into the USB-C port on the bottom of the earcup.
2. Plug the USB-A end into the USB-A charging port on your computer or AC adapter.
3. Indicator light will be a breathing white light for charging.
4. Indicator light will be solid white when fully charged
   • 2 hours will fully charge the battery.
   • 5 minutes will give you 1 hour of talk time.
5. Headset can be used with receiver and Bluetooth® paired while charging.

Charging via Qi wireless charger:

1. Fold headset with the wireless charging icon on the earcup to the outside.
2. Place earcup with wireless charging icon on top of any Qi wireless charging base.*
3. Indicator light will be a breathing, white light when charging.
4. Indicator light will be solid white when fully charged.
   • 2 hours of charging fully charges the battery.

LOGI TUNE APP

Install application

1. Download Logi Tune Desktop from www.logitech.com/tune
2. Download the Logi Tune mobile app from the Apple App Store® or Google Play stores by searching for “Logi Tune”

ADJUSTING SIDETONE

Side tone lets you hear your own voice during conversations so you are aware of how loud you are talking. In the Logi Tune app, select the side tone feature, and adjust the dial accordingly.

• A higher number means you hear more external sound.
• A lower number means you hear less external sound.

AUTO SLEEP TIMER

By default, your headset will automatically power off when not in use for one hour. Adjust the sleep timer in the Logi Tune App.

UPDATE YOUR HEADSET

It is recommended to update both your headset and receiver. To do so, download the Logi Tune Desktop from www.logitech.com/tune

RESET YOUR HEADSET

To reset your headset back to its original state, power headset on, press and hold the ANC button and volume ’–’ button for 5 seconds. The headset is successfully reset when it powers off and indicator light turns off.

Specifications

DIMENSIONS

HEADSET:

Height x Width x Depth: 174.7 x 176.7 x 70.7 mmWEIGHT: 0.1808KgEARPADS: Height x Width x Depth: 70.7 x 70.7 x 16.4 mmRECEIVER: Height x Width x Depth: 35.5 x 16.2 x 5.3 mmADAPTER: Height x Width x Depth: 106.7 x 17.5 x 10.1 mm

TECHNICAL SPECIFICATIONS

• Microphone Type: Omni-directional dual MEMS mic array Frequency response (Headset): 30~13kHz @ -10dB (music mode), 100~8kHz (talk mode)
• Frequency response (Microphone): 85~20kHz @-3dB
• Battery type: Built-in battery (Lithium ion)
• Battery life (talk time): 14 hrs (ANC on), 15 hrs (ANC off) Battery life (listening time): 14 hrs (ANC on), 16 hrs (ANC off) Bluetooth® version: 5.0
• Wireless range: Up to 30m /100 ft (open field line of sight)
• Qi Wireless charging enabled
• USB-A to C charging cable: 4.25 ft (130 cm)

www.logitech.com/support/zonewirelessplus

FAQ – FREQUENTLY ASKED QUESTIONS

References

• 
  Logi Tune – Software App for Webcams, Headsets & Logi Dock
• 
  Logitech | Defy Logic – Tools to Create a Better Tomorrow