AbleNet Single Switches User Guide
Connect Switch
Plug a single switch into any switch adapted device with a standard, mono 3.5mm switch jack.
Note: For tablet or computer access, a computer switch interface is required (sold separately).
Press* Activation Area
Once the activation area is pressed, any attached device will activate.
- String and Grasp switches are activated with a pull, squeeze, or tilt, respectively.
Beyond the Basics
Storage and Care
- Disconnect switch before cleaning with a damp cloth or alcohol.
- Do not pull or wrap the cable around the switch.
- Do not immerse in water or use solvents to clean.
- Do not open or attempt to take apart the switch.
- Do not expose switches to extreme heat or cold.
Mounting OptionsAbleNet switches can be mounted in a variety of different ways. For flat surfaces and simple mounting, try Velcro® or dual lock.
For complete mounting systems and connections designed just for your switch, visit our online store at www.ablenetinc.com.
Other Features
Big Red and Jelly Bean switches
A clear snap cover may be used to secure a picture or symbol on the Big Red and Jelly Bean switches.
Big Red and Jelly Bean twist switches include four twist-off switch tops. Firmly, rotate switch tops counter-clockwise to remove, clockwise to attach.
Colored stickers
If your switch includes colored stickers, use them to customize its appearance.
Switch covers
If your switch includes a cloth cover, wash it by hand, using a gentle detergent when necessary.
Warranty
AbleNet manufactured products include a two-year limited warranty. This warranty is against defects in materials and manufacturing for two-years from the date of purchase. Warranty in full text, along with return/ repair information is available at www.ablenetinc.com. For more information on AbleNet products and services, contact.
Support
For more information on AbleNet products and services, contact:
AbleNet, Inc.,Minneapolis/St. Paul, MN800-322-0956www.ablenetinc.com
References
[xyz-ips snippet=”download-snippet”]