abode Matrix R15 1.5 Bowl User Guide
Fitting type: Under mount or InsetSink handing: Right hand main bowlFinish style: Brushed steel
- Min. base unit (mm): 800
- Packaged size L x W x D: 640 x 500 x 280mm
- Supplied boxed or sleeved: Boxed
- Boxed weight: 7.90 kg
- Sink only weight: 4.58 kg
- Durable 304 stainless steel construction throughout
- Deep bowl(s) to accept larger cookware
- Easy clean bowl curves
- Smooth lined luxury Orbit waste supplied as standard
- Can be fitted as under mount or inset
Included parts:
Recommended accessories:
All accessories can be purchased directly from www.abode-shop.co.uk or phone 01226 283434
Materials and workmanship warranty summary:
- Sink materials & workmanship 10 years.
- Waste kits 1 year.
- Connecting pipework 1 year.
Care instructions:
- Clean the products regularly using soapy water and a non abrasive cloth, regular cleaning will prevent the build up of lime scale and dirt.
- Avoid contact with corrosive or abrasive substances.
- After cleaning rinse thoroughly with clean water then dry.
- For more detail see supplied booklet or www.abodedesigns.co.uk
Product dimensions and installation information:
Note: 
symbol indicates position of acoustic pad on stainless products.
Additional notes: Important: Please check cut out details carefully before cutting worktops, size shown is flush to bowl edgeOverall product size: 580 x 440 x 202 corner radius 10mmTap hole(s) detail: NoneComparability with large square taps:Waste hole(s) detail (mm): 90 / 90 / N/A (nb. 90mm wastes accept a waste disposal unit)Min. base unit (refers to space required for bowl, tap and overflow only): fits 800mm carcassMin. Recessed fitting width: required (bowl(s), tap and overflow: 535 mm*Worktop cut out size: varies x varies corner radius varies mm, for .DXF cut files please see www.abode.euMin. & Max worktop depth or clip depth reach range: 0 – 55mmFitting temple supplied? No, use cut out instructions as suppliedDishwasher under drainer? Distance from top of worktop to underside of the drainer n/amm
*Important, fabricator / installer notes for under mount & flush mount sinks: The cut out size indicated is aligned with outside edge of the bowl top radius (see example below).
You should confirm with your client if the work surface cutout is to be cut flush, inside or outside this suggested perimeter shape & size.
If you create the cutout smaller or larger than the indicated size then the fit of the accessories may be affected and should be physically checked.
General:All details are provided in good faith but do not include the tolerances of the material or manufacturing process.
We request that a test cutout is made in scrap timber and checked against the actual sink to be installed before committing to cutting the final work surface.
Abode can not accept liability for problems or costs incurred by failure to follow this request.
Note: the dimensions on ceramic fire clay products are subject to wider tolerances due to the nature of this natural material and the firing process.
CAD cutout files can be downloaded from www.abodedesigns.co.uk
Bowl details: (sizes in mm unless specified otherwise)
Bowl 1 (typically main bowl):Bowl 1 size L x W x D (mm): 340 x 400 x 194Bowl 1 construction: Pressed, 1.00mmBowl 1 floor radius (mm): 15Bowl 1 Waste hole diameter (mm): 90Bowl 1 overflow: Rectangular flushBowl 1 texture: Brushed stainlessBowl 1 apx. volume (litres): 18.50
Bowl 2 (typically ½ or ¾ bowl):Bowl 2 size L x W x D (mm): 180 x 400 x 146Bowl 2 construction: Pressed, 1.00mmBowl 2 floor radius (mm): 15Bowl 2 Wastehole diameter (mm): 90Bowl 2 overflow: RectangularBowl 2 texture: Brushed stainlessBowl 2 apx. volume (litres): 7.70
04/04/2019 – This sheet is a summary of the product information full details are available on request, errors & omissions excepted, details are subject to change without prior notification. www.abodedesigns.co.uk
Product order code: (AW5126)
References
[xyz-ips snippet=”download-snippet”]