abode Revolve Round Bowl & Drainer
Revolve Round Bowl & Drainer
Fitting type: Undermount or InsetSink handing: Not handedFinish style: Satin/Brushed steel
|
|
Included Parts
 |
 |
|
 |
|
1 xAXl005R (m)90mm ( 1.5″) Basic manual basket strainer waste-short belt – Multi ray |
1X A1112(m)1 x 60mm (non sealing bsw) |
1 x AXI006 (m)Rectangular overflow pipework |
1 x AX4043 (m)Fitting & care instructions & data sheet -st/st inset/undermount |
 |
 |
 |
|
|
2 X AX 1113 (m)Self adhesive strip seal (3 x 7 x 1800mm |
1 xAX1114(m)Inset fixing clips x 10 |
1 x AX4043 (m)Undermount stainless steel fixing clips x8 |
Materials and workmanship warranty summary:
- Sink materials & workmanship 10 years.
- Waste kits 1 year.
- Connecting pipework I year.
Care instructions:
- Clean the products regularly using soapy water and a nan abrasive c loth, regular cleaning will prevent the build up of lime scale and dirt.
- Avoid contact with corrosive or abrasive substances.
- After cleaning rinse thoroughly with clean water then dry.
- For more detail see supplied booklet or www.abodedesigns.co.uk
Product dimensions and installation information
Note: 
symbol indicates position of acoustic pad on stainless products.
*Important, fabricator / installer notes for undermount & flushmount sinks:
The cut out size indicated is aligned with outside edge of the bowl top radius (see example below).
You should confirm with your client if the worksurface cutout is to be cut flush, inside or outside this suggested perimeter shape & size.
If you create the cutout smaller or larger than the indicated size then the fit of the accessories may be affected arid should be physically checked.
General
All details are provided in good faith but do not include the tolerances of the material or manufacturing process.
We request that. a test. cutout is made m scrap timber and ,checked against the actual sink to be installed before ,committing to cutting the final worksurface.
Abode can not accept liability for problems or costs incurred by failure to follow this request.
Note: the dimensions on ceramic fireclay products are subject to wider tolerances due to the nature of this natural material al and the firing g process.
CAD cutout files can be downloaded from www.abodedesigns.co.uk
Bowl details
(sizes in mm unless specified otherwise)
Bowl 1 (typically main bowl):
Bowl 1 size L x W x D (mm): 380 x 380 x 1165Bowl 1 construction: Pressed, 0.60mmBowl. 1 floor radius (mm): 40Bowl 1 Wastehole diameter (mm): 90Bowl1 1 overflow: Slotted, std equal patternBowl, 1 texture: Brushed stainlessBowl 1 a x. volume liters: 12.,80
Bowl 2 (typically ‘1/2 or 3/4. bowl):
Bowl 2 size:·8 L x W x D (mm): 380 x 380 x 46Bowl 2 construction: pressed, 0.60mmBowl 2 floor radius (mm): 10Bowl 2 Wastehole diameter (mm): 60Bowl 2 overflow: N/ABowl 2 texture: Satin/Brushed stainlessBowl 2 a x. volume (liters): N/ A
Bowl 3:
Bowl 3 size L x W x D (mm): N/A x N/A x N/ABowl 3 construction: N/ A, N/ AmmBowl 3 floor radius (mm): N/ ABowl 3, Wastehole diameter (mm): N/ ABowl 3 overflow: N/ ABowl 3 texture: N/ ABowl 3 apx volume liters: N/ A
Product order code: {AW5129)
21/12/2018 – This sheet is a summary of the product information full details are available on request. errors & omissions excepted, details are subject to change without prior notification.
References
[xyz-ips snippet=”download-snippet”]