abode Vista 1.5 Bowl Instruction Manual
Stainless Steel:
Fitting Type: UndermountSink Handling: ReversibleFinish Style: Brushed Steel
- Min, base unit (mm): 600 (excluding fixings)
- Packages size L x W x D: 640 x 500 x 230 mm
- Supplied boxed or sleeved: Boxed
- Boxed Weight: 4.72 KG
- Sink only Weight: 2.96 KG
- Durable 304 stainless steel construction throughout
- Supplied with all parts required
- Easy clean bowl curves
- Practical basket waste supplied
- Fits in a 600 base cabinet excluding fixing clips
Included Parts:
- 2 x AX1005R (m)90mm (1.5″) Basic manual basketstrainer waste – short bolt – Multi ray
- 1 x AX1006 (m)Rectangular overflow pipework
- 1 x AX4039 (m)Fitting & care instructions & data sheet– st/st undermount
- 1 x AX1108 (m)Undermount stainless steel fixing clipsx 8
Recommended Accessories:
All accessories can be purchased directly fromwww.abode-shop.co.uk or phone 01226 283434
Materials and workmanship warranty summary:
- Sink materials & workmanship 10 years.
- Waste kits 1 year.
- Connecting pipework 1 year.
Care Instructions:
- Clean the products regularly using soapy water and a non abrasive cloth, regular cleaning will prevent the build upof lime scale and dirt.
- Avoid contact with corrosive or abrasive substances.
- After cleaning rinse thoroughly with clean water then dry.
- For more detail see supplied booklet or www.abodedesigns.co.uk
Product dimensions and installation information
Note: 
Symbol indicates position of acoustic pad on stainless products.
Additional Notes: Important: Please check cut out details carefully before cutting worktops, size shown is flush to bowl edge.
| Overall product size | 590 x 445 x 180 corner radius 80mm |
| Taphole(s) detail: | None |
| Compatability with large square taps: | |
| Wastehole(s) detail (mm): | 90 / 90 / N/A (nb. 90mm wastes accept a waste disposal unit) |
| Min. base unit (refers to space required for bowl, tap and overflow only): | fits 600 (excluding fixings)mm carcass |
| Min. Recessed fitting width: | required (bowl(s), tap and overflow: 545 mm |
| Worktop cut out size | 550×405 corner radius variesmm, for .DXF cut files please see www.abode.eu |
| Min. & Max worktop depth or clip depth reach range | 0 – 5mm |
| Fitting temple supplied? | No, use cut out instructions as supplied |
| Dishwasher under drainer? | Distance from top of worktop to underside of the drainer n/amm |
Bowl details: (sizes in mm unless specified otherwise)
| Bowl 1 (typically main bowl): | |
| Bowl 1 size L x W x D (mm): | 395 x 335 x 175 |
| Bowl 1 construction: | Welded, 0.80mm |
| Bowl 1 floor radius (mm): | 55 |
| Bowl 1 Wastehole diameter (mm): | 90 |
| Bowl 1 overflow | Slotted, std equal pattern |
| Bowl 1 texture: | Brushed stainless |
| Bowl 1 apx. volume (litres): | 15.10 |
| Bowl 2 (typically ½ or ¾ bowl): | |
| Bowl 2 size L x W x D (mm): | 305 x 175 x 110 |
| Bowl 2 construction: | Welded, 0.80mm |
| Bowl 2 floor radius (mm): | 15 |
| Bowl 2 Wastehole diameter (mm): | 90 |
| Bowl 2 overflow: | N/A |
| Bowl 2 texture: | Brushed stainless |
| Bowl 2 apx. volume (litres): | 5.30 |
| Bowl 3: | |
| Bowl 3 size L x W x D (mm): | N/A x N/A x N/A |
| Bowl 3 construction: | N/A, N/Amm |
| Bowl 3 floor radius (mm): | N/A |
| Bowl 3 Wastehole diameter (mm): | N/A |
| Bowl 3 overflow: | N/A |
| Bowl 3 texture: | N/A |
| Bowl 3 apx. volume (litres): | N/A |
Important, fabricator /installer notes for undermount & flushmount sinks:The cut out size indicated is aligned with outside edge of the bowl top radius (see example below).
You should confirm with your client if the worksurface cutout is to be cut flush, inside or outside this suggested perimeter shape & size.If you create the cutout smaller or larger than the indicated size then the fit of the accessories may be affected and should be physicallychecked.
General:All details are provided in good faith but do not include the tolerances of the material or manufacturing process.We request that a test cutout is made in scrap timber and checked against the actual sink to be installed before committing to cutting thefinal work surface. Abode can not accept liability for problems or costs incurred by failure to follow this request.
Note: The dimensions on ceramic fireclay products are subject to wider tolerances due to the nature of this natural material and the firing process. CAD cutout files can be downloaded from.www.abodedesigns.co.uk
References
[xyz-ips snippet=”download-snippet”]