abode Xcite 1.5 Bowl & Drainer Instruction Manual

abode Xcite 1.5 Bowl & Drainer

Xcite 1.5 Bowl & Drainer

Fitting type: InsetSink handing: ReversibleFinish style: Grey metallic granite

  • Min. base unit (bowl, tap & overflow only): 600 mm
  • Packaged size L x W x D: 1100 x 610 x 285mm
  • Supplied boxed or sleeved: Boxed – brown
  • Boxed weight: 22.26 kg
  • Sink only weight: 17.18 kg
  • Durable matt finish granite composite construction throughout
  • One a half bowl design for maximum practicality
  • Softened square edges for a sharp but easy clean look
  • Reversible drainer position for maximum flexibility
  • Stainless steel wastes and pipework Included

Included parts

1 x AX1052 (m)2 x 90mm std bsw, std o/flow &pipework

1 x AX1033 (m)Composite inset fixing clips x 8

1 x AX4025 (m)fitting instructions for AX1052plumbing kit

1 x AX4004 (m)Fitting & care instructions & data sheet– coloured inset

Recommended accessories

1 x AX2503High & Dry drainer rack – White andgrey

1 x AX2500Silicone drainer mat 320 x 320mm

1 x AX301lBowl mat 27 4 x 334 RS

1 X AX2017Glass Chopping Board 500x280mm(475) – Black Gloss

1 X AX2023Glass Chopping Board 500x280mm(475) – White Gloss

All accessories can be purchased directly from www.abode-shop.co.uk or phone 01226 283434

Materials and workmanship warranty summary:

  • Sink materials & workmanship 10 years.
  • Waste kits 1 year .
  • Connecting pipework 1 year .

Care instructions:

  • Clean the products regularly using soapy water and a non abrasive cloth. regular cleaning will prevent the build up of lime scale and dirt.
  • Avoid contact with corrosive or abrasive substances .
  • After cleaning rinse thoroughly with clean water then dry .
  • For more detail see supplied booklet or www.abodedesigns.co.uk

Product dimensions and installation information

Note: symbol indicates position of acoustic pad on stainless products.

Additional notes: Repeated release of boiling hot water directly into coloured sinks can in extreme cases cause crazing and even cracking. Therefore we recommend great care is taken not to release the water directly on to the sink surface at full temperature.Overall product size: 1000 x 500 x 200 corner radius 10mm

Taphole(s) detail: 2 x 0 35m, Part drilled for drill guideCompatibility with large square taps:Wastehole(s) detail (mm): 90 / 90 / N/ A (nb. 90mm wastes accept a waste disposal unit)Min. base unit (refers to space required for bowl, tap and overflow only): fits 600mm carcassMin. Recessed fitting width: required (bowl(s), tap and overflow: 545mm*Worktop cut out size: 976×476 corner radius 10mm, for .DXF cut flies please see www.abode.euMin. & Max worktop depth or clip depth reach range: 27 – 45mmFitting temple supplied? No, use cut out instructions as suppliedDishwasher under drainer? Distance from top of worktop to underside of the drainer 33mm

*Important, fabricator / installer notes for undermount & flushmount sinks:

The cut out size indicated is aligned with outside edge of the bowl top radius ( see example below).You should confirm with your client if the worksurface cutout is to be cut flush, inside or outside this suggested perimeter shape & size.If you create the cutout smaller or larger than the indicated size then the fit of the accessories may be affected and should be physically checked

General

All details are provided in good faith but do not include the tolerances of the material or manufacturing process.

We request that a test cutout is made in scrap timber and checked against the actual sink to be installed before committing to cutting the final worksurface.

Abode can not accept liability for problems or costs incurred by failure to follow this request.

Note: the dimensions on ceramic fireclay products are subject to wider tolerances due to the nature of this natural material and the firing process.

CAD cutout files can be downloaded from www.abodedesigns.co.uk

Bowl details

(sizes in mm unless specified otherwise)

Bowl 1 (typically main bowl):

Bowl 1 size L x W x D (mm): 350 x 420 x 180Bowl 1 construction: Moulded, 10.00mmBowl 1 floor radius (mm): 10Bowl 1 Wastehole diameter (mm): 90Bowl 1 overflow: NoneBowl 1 texture: Matt texturedBowl 1 apx. volume (liters): 16.00

Bowl 1 (typically main bowl):

Bowl 2 size L x W x D (mm): 150 x 350 x 105Bowl 2 construction: Moulded, 11.00mmBowl 2 floor radius (mm): 10Bowl 2 Wastehole diameter (mm): 90Bowl 2 overflow: Circular, 30mm diameterBowl 2 texture: Matt texturedBowl 2 apx. volume (liters): 3.60

Bowl 3:

Bowl 3 size L x W x D (mm): N/A x N/A x N/ABowl 3 construction: N/ A, N/AmmBowl 3 floor radius (mm): N/ ABowl 3 Wastehole diameter (mm): N/ABowl 3 overflow: N/ABowl 3 texture: N/ABowl 3 apx. volume (liters): N/ A

Product order code: {AW3162)

21/12/2018 – This sheet is a summary of the product information full details are available on request. errors & omissions excepted, details are subject to change without prior notification. www.abodedesigns.co.uk

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,