Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.
Unpacking InstructionsRemove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove.
Package Contents
Display
Wireless Sensors (2)
Instruction Manual
PRODUCT REGISTRATIONRegister online to receive 1 year warranty protectionwww.AcuRite.com
Features & Benefits: Sensors
Refrigerator Sensor
Freezer Sensor
Suction Cup / Shelf ClipFor versatile mounting options.
A-B-C SwitchID code that must match displays A-B-C switch to ensure units synchronize.
Battery Compartment
Wireless Signal IndicatorFlashes when data is being sent to the display.
2
Features & Benefits
Display
∨ & ∧ ButtonsFor setup preferences and to view all-time records.
SET ButtonFor alarm setup preferences.
Freezer Sensor Signal Strength
Freezer Sensor Low Battery Indicator
Wireless Signal IndicatorsFlashes when sensor has lost signal from display.
Alarm ON Indicator
Min/Max RecordsHighest and lowest temperatures from the past 24 hours.
Freezer Sensor Current Temperature
&ButtonsFor alarm and records settings.
Refrigerator Sensor Current Temperature
Display Low Battery Indicator
Refrigerator Sensor Low Battery Indicator
Refrigerator Sensor Signal Strength
ButtonFor alarm setup preferences.
Fold-out Stand
Battery Compartment
°C/°F ButtonSelect between degrees Celsius or Fahrenheit.
Integrated Hang HoleFor easy wall mounting.
Magnet Mount
A-B-C SwitchID code that must match sensor’s A-B-C switch to ensure units synchronize.
Battery Compartment Cover
3
SETUP
Install or Replace BatteriesAcuRite recommends high quality alkaline batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended.
The freezer sensor requires lithium batteries for low temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the freezer sensor for temperatures below -4ºF / -20ºC.
Thermometer Display
Lift up the battery door and slide off the battery compartment cover.
Insert 3 x AA batteries into the battery compartment. Follow the polarity (+/-) diagram in the battery compartment.
Replace the battery cover.
Sensors
Slide off the battery compartment covers, located on the front of the units.
Insert 2 x AA batteries into the battery compartment. Follow the polarity (+/-) diagram in the battery compartment.
Replace the battery cover.
LITHIUM BATTERIES
ALKALINE BATTERIES
Select Degrees Fahrenheit or Celsius
To select between degrees Fahrenheit (ºF) or Celsius (ºC) temperature units, press and release the “ºC/ºF” button, located on the back of the thermometer display.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as butteries may explode or leak. DO NOT mix old and new butteries or types of butteries (alkaline/standard). DO NOT use rechargeable butteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
4
Display Placement
Place display in a dry area free of dirt and dust. Display is magnet mountable and has a fold-out stand for tabletop use. For wall mounting, hang using the keyhole located on the back of the unit.
Sensor Placement
Both sensors will work in either the refrigerator or freezer, however the default alerts are set based on the sensor’s indicated use (see page 2).
Each sensor is equipped with a silicon band to securely attach to a wire shelf.
Each sensor also includes a detachable suction cup that can be used to attach the sensor to the interior surface of the refrigerator. Please note: suction cups do not adhere well to freezing surfaces.
Display and sensors must be located within 75 ft (23 m) of each other.
5
OPERATION
Using the ThermometerHigh & Low Records
The thermometer displays high and low temperature records for all-time and the past 24 hours (rolling). All-time records reflect the highest and lowest temperatures recorded since the batteries were inserted or the records have been cleared. High and low records for the past 24 hours are shown on the display, by default.
Press and the release the “∧ ” or ” ∨ ” button to view all-time records. If no buttons are pressed for 5 seconds, the display will return to normal operation mode.
To clear the high records, press and hold the ” ∧ ” button for 5 seconds while viewing the record you wish to clear. To clear the low records, press and hold the ” ∨ ” button for 5 seconds while viewing the records you wish to clear. Dashes display to confirm you have cleared the record(s).
Programmable Alarms
Programmable alarms notify you audibly and visually when temperatures exceed your preset minimum / maximum temperature range. An alert is triggered when a temperature is out of range for longer than 5 minutes. This prevents false alarms due to the fridge/freezer door being held open while new items are being loaded/unloaded.
To enable alerts for both sensors, press and hold the ” ” button for 5 seconds until ” ” is shown next to the current temperatures.
To enable alerts for a select sensor, press the ” ” or ” ” button first, then press the ” ” button once to enable alarm. Disable the alarms at any time by following the same steps until “ ” is shown next to the current temperature. The default temperature alarm settings for the refrigerator thermometer are minimum 33ºF / maximum 40ºF. The default temperature alarm settings the freezer thermometer are minimum -20ºF / maximum 32ºF.
To customize temperature alarms:
Select the sensor you want to customize by pressing the “” or “” button.
Press and release the “SET” button; the minimum temperature alarm setting will blink.
Press the “∧ ” or ” ∨ ” button to increase or decrease the minimum temperature alarm setting.
Press the “SET” button to confirm the minimum temperature alarm setting.
Press the “∧ ” or ” ∨ ” button to increase or decrease the maximum temperature alarm setting.
Press the “SET” button to confirm the maximum temperature alarm setting.
NOTE: When thermometer is in normal operating mode (not in alarm setup mode), the min/max readings display the highest/lowest temperatures from the previous 24 hours.
6
Troubleshooting
Temperature isshowing dashes
Relocate the display and/or the sensors.
The units must be within 75 ft (23 m) of each other.
Flashing of the temperature is generally an indication of wireless interference. Perform a hard reset to gain a strong connection between the units:
Bring all 3 units together, side-by-side.
Remove all batteries from all 3 units.
Reinstall batteries in thermometer display first.
Reinstall batteries into sensor #1.
Reinstall batteries into sensor #2.
The display should read temperatures from both sensors almost instantly.
Inaccuratetemperature
Use standard alkaline batteries (or lithium batteries in sensor when temperature is below -4ºF/-20ºC). Do not use heavy duty or rechargeable batteries.
Display screennot working
Check that the batteries are installed correctly. Batteries may need to be replaced.
Reset display by pressing the RESET button, located on the back of the display.
Verify youʼre within the measurable temperature range (-40.0ºF to 99.0ºF; -40.0ºC to 37.2ºC).
If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or email [email protected] for assistance.
7
Care & MaintenanceClean with a soft damp cloth. Do not use caustic cleaners or abrasives.
Specifications
DISPLAYTEMPERATURERANGE
-40.0ºF to 99.0ºF; -40.0ºC to 37.2ºC
SENSORTEMPERATURERANGE
-40ºF to 158ºF; -40ºC to 70ºC
WIRELESSRANGE
75 ft / 23 m(signal range is impacted by sensorlocation and may vary)
WIRELESSFREQUENCY
433 MHz
POWER
Display: 3 x AA alkaline batteriesRefrigerator and Freezer Sensors:4 x AA alkaline or lithium batteries
DATAREPORTING
60 second updates
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:1- This device may NOT cause harmful interference, and2- This device must accept any interference received, including interference that may cause undesired operation.WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.Such modifications could void the user authority to operate the equipment.This device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions:
This device may not cause interference, and
This device must accept any interference received, including interference that may cause undesired operation of the device.
8
Customer SupportAcuRite customer support is committed to providing you with best-in class service. For assistance , please have the model number of this product available and contact us in any of the following ways:
Installation Videos Replacement Parts Support User Forum Instruction Manuals Register your Product Submit Feedback & Ideas
IMPORTANT
PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE
PRODUCT REGISTRATIONRegister online to receive 1 year warranty protectionwww.AcuRite.com
Limited 1-Year WarrantyAcuRite is a wholly owned subsidiary of Chaney Instrument Company. For purchases of AcuRite products, AcuRite provides the benefits and services set forth herein. For purchases of Chaney products, Chaney provides the benefits and services set forth herein.
We warrant that all products we manufacture under this warranty are of good material and workmanship and, when properly installed and operated, will be free of defects for a period of one year from the date of purchase.
Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by us, and at our sole option, be repaired or replaced by us. Transportation costs and charges for returned goods shall be paid for by the purchaser. We hereby disclaim all responsibility for such transportation costs and charges. This warranty will not be breached, and we will give no credit for products which have received normal wear and tear not affecting the functionality of the product, been damaged (including by acts of nature), tampered, abused, improperly installed, or repaired or altered by others than our authorized representatives.
Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). If we determine that repair or replacement is not feasible, we may, at our option, refund the amount of the original purchase price.
THE ABOVE-DESCRIBED WARRANTY IS THE SOLE WARRANTY FOR THE PRODUCTS AND IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. ALL OTHER WARRANTIES OTHER THAN THE EXPRESS WARRANTY SET FORTH HEREIN ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
We expressly disclaim all liability for special, consequential, or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
We further disclaim liability from personal injury relating to our products to the extent permitted by law. By acceptance of any of our products, the purchaser assumes all liability for the consequences arising from their use or misuse. No person, firm or corporation is authorized to bind us to any other obligation or liability in connection with the sale of our products.
Furthermore, no person, firm or corporation is authorized to modify or waive the terms of this warranty unless done in writing and signed by a duly authorized agent of ours.
In no case shall our liability for any claim relating to our products, your purchase or your use thereof, exceed the original purchase price paid for the product.
Applicability of PolicyThis Return, Refund, and Warranty Policy applies only to purchases made in the United States and Canada. For purchases made in a country other than the United States or Canada, please consult the policies applicable to the country in which you made your purchase.
Additionally, this Policy applies only to the original purchaser of our products. We cannot and do not offer any return, refund, or warranty services if you buy products used or from resale sites such as eBay or Craigslist.
Governing LawThis Return, Refund, and Warranty Policy is governed by the laws of the United States and the State of Wisconsin. Any dispute relating to this Policy shall be brought exclusively in the federal or State courts having jurisdiction in Walworth County, Wisconsin; and purchaser consents to jurisdiction within the State of Wisconsin.
9
Weather StationsTemperature & Humidity
Weather Alert Radio Kitchen Thermometers & Timers
Clocks
It’s more than accurate, it’s
AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with confidence™.