acme BH410 True Wireless Earbuds User Manual

acme BH410 True Wireless Earbuds

Technical specifications

Type: in-ear, BluetoothFrequency response: 20­20 000 HzDriver size: 6 mmBluetooth version: v4.2Frequency range: 2.4­2.48 GHzMaximal output radio frequency power: 1.05 dBm / 1.27 mWWorking distance: up to 10 mPower supply: micro-USB, 5V DCMicrophone: built-inBattery (charging case): Li-poly, 300 mAh (1.11 Wh)Earphones charging time: up to 1 hourCharging time of the charging case: up to 2 hoursStandby time: up to 50 hoursPlayback time: up to 2 hoursRecharging with the charging case: 2 timesTotal weight: 38 g

WARNING: Listening at a high volume for a long time may damage your hearing.

Product overview

  1. Power (multifunction) button
  2. Indicator light and MIC
  3. Speaker
  4. Charging contacts
  5. Opening button
  6. Charging indicator
  7. Micro-USB charging port

Before you start using the earphones, you must charge the battery and pair the earphones with a compatible device.

Charging the earphones and charging case

The BH410 charging case has an internal, rechargeable battery that must be fully charged before being used for the first time. It takes about 2 hours to fully charge the battery for the first time. If you do not use the device for a long period of time, please charge it once every 2 months to avoid damage to the battery.

  • Put the earphones in the charging case and close the cover to charge. During charging, the indicators will show a steady red colour. When the battery is fully charged, the red light will turn off.
  • Use the USB charging cable to charge the charging case. The indicator light of the charging case is red when being charged. It will turn off automatically after being fully charged.

Fully charged earphone batteries have the power for up to 2 hours of playback time (4 hours more from the charging case). When the batteries are running out of power, a voice prompt will be heard. This indicates that the earphones need to be charged as soon as possible.

Pairing

Automatic (with the charging case) method:

  • Remove the two earphones from the charging case* and wait for 10 seconds. The two earphones will power on and enter to the pairing mode automatically. A fast-blinking red/blue LED light on the right earphone and a slowly-blinking blue LED light on the left one will indicate that the earphone is ready to pair with your device.
  • Turn on the Bluetooth function on your device, select BH410 from the list, and pair the earphone.
  • A voice prompt will be heard from the right earphone saying that the earphones are connected. *The charging case must be closed tightly before opening it and removing the earphones.

Manual (without the charging case) method:

  • When both earphones are in an off state, press and hold the power (multifunction) button of both for 3-4 seconds. A voice prompt will be heard from both earphones saying that left and right channels are successfully connected. Then a voice prompt will be heard saying which earphone is the left one (“left channel”) and which is the right one (“right channel”), and after that in the right earphone you will hear the voice prompt of pairing.
  • Turn on the Bluetooth function on your device, select BH410 from the list, and pair the devices.
  • A voice prompt will be heard from the right earphone saying that the earphones are connected. If pairing is successful, the earphones will enter to an idle mode and the blue lights will flash once every 5 seconds in different earphones. If no Bluetooth connection is made within 10 minutes, the earphones will turn off automatically.

Basic Use

To switch on, when both earphones are in an off state, press and hold the power (multifunction) button for 3 seconds for both earphones at the same time until the blue indicator light flashes 3 times with the sound prompt.

To switch off, when both earphones are in an on state, press and hold the power (multifunction) button of one earphone (left or right) for 3 seconds to power off both earphones until the red indicator light flashes 3 times with the sound prompt or just put them back into the charging case.

Automatic reconnectionWhen both earphones are in an off state, remove them from the charging case at the same time, and they will reconnect automatically. And the right (main) earphone will reconnect to the paired device automatically.

Answer a callWhen there is an incoming call, press the power (multifunction) button on the right (main) earphone.

While making phone calls, only the right (main) earphone produces sound.

Reject a callTo end the call, press and hold the power (multifunction) button on the right (main) earphone for 2s.

End a callTo end the call, press the power (multifunction) button on the right (main) earphone.

Play/PauseDouble tap the power (multifunction) button to pause the song. Single press to play the song.

Increase/Decrease volumeShort press the right earbud to increase the volume. Short press the left earbud to decrease the volume.

Next/Previous songPress and hold the right earbud to change song to next one. Press and hold the left earbud to change song to previous one.

Voice assistantDouble tap left earbud and the smartphone’s assistant will appear. After prompt sound you can ask any question and the answer will play to the earphones.

Wearing the earphones

To properly wear the earphones:STEP 1. Place the earphones in the ears as shown.STEP 2. Slightly rotate the earphone until it gets tight.

LED indications

No. Status Headset Perform ance
1 Pairing The indicator light of the right earp ho ne flashes red and blue alternately; when successfully connected to the device, the indicator lig ht flashes blue once every 5 seconds.
2 Standby mode The indicator light of the rig ht earphone flas hes blue every 5 seconds.
3 Call state In case of the incoming call, the indicator light of the earphone flashes red every 5 seconds.
4 Headset cha rg ing state The indicator light of the headset is red when being charged and will turn off automatically after being fully charged.
5 Charging case charging state The indicator light of the charging case is red when being charged and will turn off automatically after being fully charged.
6 Power on state The indicator light flashes blue 3 times and then flashes red once every 5 seconds.
7 Power off state The indicator light flashes red 3 times.
8 Low battery ala rm The indicator light flashes red once every 20 seconds.

Troubleshooting

Faults Reasons and Solutions
  • The earphones cannot be turned on.
  • The earphones turn off automatically.
  • The earphones cannot turn on by picking them up from the charging case.
Charging case low battery protection.Recharge your earphones and charging case.
  • Music is not playing.
Make sure that both devices are paired and connected and that “Media playback “is enabled in your Bluetooth settings. Try to pair it again.
  • Pairing was successful but the device cannot find the right earphone or reconnect/connect.
Too many pairing records. Delete pairing records(unpair) and try again. It is possible that you are not able to connect because the earphones are paired with another nearby device. You will have to disconnect the other device, or even turn off its Bluetooth function.Now you can try again to pair or reconnect.To reset earphones, take them out of the charging box. When both earphones are in an on state, press and hold the power (multifunction) button of one earphone (left or right) for 3 seconds to power off both earphones until the red indicator light flashes 3 times. Press and hold power button of both earphones for 7 seconds till sound prompt will be heard. Turn on earphones and wait about 10 seconds till resetting operation will be completed.
  • The charging case indicator has no light while charging.
DC power supply does not output power.Check your USB connections and try to charge with a different charger.
  • The earphone indicator has no light while charging.
Check the pogo pin charging points. Place the earphone correctly in the charging case.

Care and maintenance

  • Don’t use abrasive cleaning solvents to clean the headset.
  • Do not expose the headset to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
  • Don’t dispose of the headset in a fire as it will result in an explosion.
  • Don’t expose the headset to contact with sharp objects as this will cause scratches and damage.
  • Don’t let the headset fall down onto the floor. The internal circuit might get damaged.

Waste Electrical and Electronic Equipment (WEEE) Symbol The use of the WEEE symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider or the shop where you purchased the product.

report this ad

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by