SMART SCALES
User Manual
MODEL: ACMMD003
Introduction
Thank you very much for selecting the Actiiv Smart Scale carefully and thoroughly so as to ensure for your further reference in case you have problems.
Functions
Smart ScalesAuto step “ON” and “OFF”Measures your weight and BMIDisplay and record your results with an App via Bluetooth
Specifications
Equipped with 4 high precision strain gauge sensorsReliable 6 mm tempered glass platformCapacity: 180KG/396LB1.0” LCD displayStandard step-on and auto-offOverload and low battery indicationOperate by 1xCR2032 battery
Quick Start Guide
- Setup your Smart Scale on a hard flat surface (avoiding carpets or any soft surface).
- Remove the battery insulation film (battery pull tab).
- To set “units” in KG or LB, press the middle button directly behind the display on the back of the scale.
- This scale does not have an ON/OFF button, as it is an auto ON/OFF scale. It will turn on when you step onto it.
Compatibility
The smart scale is compatible with these Apps:
- Keeweight
- I Joy Scale (iOS only)
The smart scale and Apps are compatible with the below devices using iOS 7.0 and above:
- iPhone 4S and above
- iPod Touch 5th GEN and above
- iPad 4 and above
The smart scale and Apps are compatible with the below devices using Android 4.3 and above:
- Samsung Galaxy S4 and above
- Samsung Note II and above
Operating Instructions
1. Ensure Bluetooth is turned “ON” on your phone2. Search for and download the “Keeweight” App onto your phone3. Open the App and the following screen should appear
4. Go to Settings in the bottom right corner of the screen
5. Select “Add User” and follow the instructions in the table to set up your personal details. Select “Save” when you have completed your details.
6. Go back to the main page, press “Scan” on the top right corner.7. The tab should change to “Scanning”8. Step onto the Scale and wait for the reading to settle and read onto the App (the tab shouldchange from “Scanning – Connect – to Discover)
9. The recorded reading is plotted onto a chart, you can press “Chart” on the botom bar tocheck your last reading.
10. Please note: the Chart records and keeps the latest reading of each day to assist you withtracking your performance.
Maintenance and Care
- When the scale is overloaded, it will display.
- When the battery needs to be replaced, it will display
- Ensure the scales are set up on a flat, even and firm surface. Avoid carpet or soft surfaces.
- Always weigh yourself with the same scale placed on the same surface. Uneven floors may affect the reading.
- The surface of the scale will be slippery if wet. Keep it dry!
- To ensure a consistent result, weigh yourself without clothing and footwear, before meals and at the same time of day.
- Keep the scales in a dry place to protect the electronic components.
- Clean after use with a lightly damp cloth, do not use solvents or immerse the product in water.
- Avoid overloading the scales, otherwise permanent damage may occur.
- Do not disassemble the scales other than to replace the battery.
- Do not store the scales in an upright position when not in use as this will drain the battery.
- Avoid excessive impact or vibration to the unit, such as dropping the scales onto the floor, or leaving objects on the scales.
- A user who has any metal material inserted into his/her body may get differences in measurement of body fat reading.
- Pacemaker users are advised against using this device.
Support
For product support, please go to www.actiivfitness.com
Actiiv Smart Scale Manual ACMMD003 – Actiiv Smart Scale Manual ACMMD003 –
[xyz-ips snippet=”download-snippet”]