ACURITE 01412M Indoor Air Quality Monitor User Guide

ACURITE 01412M Indoor Air Quality Monitor User Guide

Track temperature, humidity, PM2.5 levels in your homeAcuRite Air measures the indoor temperature, humidity, and particulate matter (PM2.5) level and gives you real- time insight into your indoor air quality. By keeping track of indoor air quality, youcan make healthier decisions in your home or office, where you spend most of your time.

 

WHAT’S INCLUDED:

  • AcuRite Air
  • Micro USB power cord with AC power adapter
  • Instruction Manual

 

Overview

 

PLACEMENT TIPS

Proper product placement ensure it can provide accurate readings.

  • Make sure it is at the right height and has good airflow Height: place at sitting or standing level, typically 3 to 6 feet (0.9 to 1.8 m) above the floor. Airflow: include at least 2 inches (5.08 cm) of clearance from walls or other solid objects.
  • Avoid placing by direct sunlight or near heat sources
  • Avoid placing in an area where airflow changes often, such as by air conditioning and heat vents, fans, doors, or windows
  1. POWER ONFrom the backside of the device insert the Micro USB power cord and plug the power adapter into an electrical outlet.
  2. SET TO YOUR LOCAL TIME AND TEMPERATURE UNITSPress and hold the SETTING button for 3 seconds.Once in set mode, the preference you are currently setting will blink on the display. To adjust the currently selected flashing item, press and release the or buttons. To save your adjustments, press and release the button again to adjust the next preference. The preference set order is as follows:• 12/24 HOUR CLOCK                                                                                                         • CLOCK MINUTE• CLOCK HOUR                                                                                                                    • ºF or ºC
  3. BRIGHTNESS CONTROLPress the ▲ or ▼ buttons to adjust backlight brightness

ONLINE PRODUCT REGISTRATIONRegister your product online within 30 days from the date of purchase at www.acurite.com/product-registration

MAINTENANCE AND CARE INSTRUCTIONS

Clean the device with a soft, damp cloth and avoid getting moisture into any openings.Do not use caustic cleaners or abrasives.

PM2.5 LEVELS μg/m3 *

*Based on EPA 2012 Revised Air Quality Standards 1 Sensitive groups include people with heart and lung disease and diabetes, and older adults and children.

 

TROUBLESHOOTING

 

SPECIFICATIONS

 

FCC Information

Hereby, AcuRite, declares that this Weather Station is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

  1. This device may NOT cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

This device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation of the device.

 

WE’RE HERE TO HELP!When you have questions or need assistance,visit us online at www.acurite.com/support

LIMITED 1-YEAR WARRANTY.For more information on warranty and other policies,visit us online at www.acurite.com/warranty.

 

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,